Journal Issue Title Abstract File
PNRPU Mechanics Bulletin No 4 (2016) The influence of fluid filtration on the strength of porous fluid-saturated brittle materials Abstract PDF
(Rus)
Dimaki A.V., Shilko E.V., Astafurov S.V., Psakhie S.G.
Bulletin PNRPU. Mechanical engineering, materials science Vol 18, No 4 (2016) THE INFLUENCE OF HEAT TREATMENT ON QUALITY OF WELDED JOINTS IN THE SECOND STAGE OF UNITS IN THE ROLLING SHOP NO. 11 OJSC “Magnitogorsk Iron and Steel Works” Abstract PDF
(Rus)
Lazareva A.I., Kopceva N.V., Gorlenko D.A., Efimova J.J., Nikitenko O.A., Golubchik E.M.
Construction and Geotechnics Vol 9, No 1 (2018) THE INFLUENCE OF HORIZONTAL UNDERGROUND TUNNELS, ORIENTED PARALLEL TO THE FRONT OF THE UNIFORM SLOPE, ON ITS STABILITY Abstract
Bogomolov A.N., Abramov G.A., Bogomolova O.A., Pristanskov A.A., Ermakov O.V.
Bulletin PNRPU. Mechanical engineering, materials science Vol 21, No 4 (2019) THE INFLUENCE OF LASER EXPOSURE ON THE STATE OF HARDENED HIGH-SPEED STEEL Р6М5 Abstract PDF
(Rus)
Tokarev D.I., Drozdov A.A., Morozov E.A., Ablyaz T.R., Ivanova Y.S., Polezhaev I.S.
Bulletin PNRPU. Mechanical engineering, materials science Vol 21, No 3 (2019) THE INFLUENCE OF LASER TREATMENT OF POWDER STEEL PA-ZHGR ON THE GEOMETRIC PARAMETERS OF THE LASER EXPOSURE ZONE Abstract PDF
(Rus)
Usynin E.V., Oglezneva S.A., Morozov E.A.
Applied Mathematics and Control Sciences No 1 (2015) The influence of parameters process of plastic deformation on the formation of technological residual stresses Abstract PDF
(Rus)
Kuznetsova E.V., Kolmogorov G.L., Trofimov V.N., Vavel' A.I.
Bulletin PNRPU. Mechanical engineering, materials science Vol 21, No 3 (2019) THE INFLUENCE OF PLASMA ELECTROLYTIC CARBONITRIDING ON PHASE COMPOSITION OF Cr-Ni-Al ALLOY Abstract PDF
(Rus)
Popova N.A., Nikonenko E.L., Erbolatova G.U., Nikonenko A.V.
Bulletin PNRPU. Mechanical engineering, materials science Vol 19, No 4 (2017) THE INFLUENCE OF PLASMA TREATMENT REGIMES ON THE DISTRIBUTION OF NONMETALLIC INCLUSIONS IN STEEL Abstract PDF
(Rus)
Myshkina A.V., Akulova S.N., Krivonosova E.A., Shchitsyn I.D., Sinani I.L.
Construction and Geotechnics Vol 10, No 1 (2019) THE INFLUENCE OF SINGLE-LAYER AND DOUBLE-LAYER BASES VERTICAL SOIL PRESSING ON THE BEARING CAPACITY OF PILES Abstract PDF
(Rus)
Stepanov M.A., Dzhabrailova K.R., Rybak G.I., Stepanov M.A.
PNRPU Mechanics Bulletin No 1 (2019) The Influence of Stress Concentrators on the Magnesium Alloy Mechanical Behavior under Deformation at High Strain Rates in the Temperature Range from 295 to 673 K Abstract PDF
(Rus)
Skripnyak V.A., Skripnyak V.V., Kozulin A.A., Iohim K.V.
Construction and Geotechnics Vol 10, No 2 (2019) THE INFLUENCE OF STRUCTURE FORMING FACTORS ON LOW-CYCLE FATIGUE OF A POLYMER COMPOSITE MATERIAL BASED ON FURFURAL ACETONE MONOMER (FAM) Abstract PDF
(Rus)
Bondarev B.A., Pankov A.E., Belyaev T.K.
PNRPU Mechanics Bulletin No 4 (2020) The influence of surface effects in the problem of theory of elasticity for a circular hole in a half-plane Abstract PDF
(Rus)
Gandilyan D.V.
Perm Journal of Petroleum and Mining Engineering Vol 24, No 3 (2024) The Influence of Tectonic Faults on the Wells Productivity in the Fault-Block Structure Field of the Komi Republic Abstract PDF
(Rus)
Shcherbakova I.S., Raspopov A.V.
Bulletin PNRPU. Mechanical engineering, materials science Vol 18, No 1 (2016) THE INFLUENCE OF THE CONTINUOUS COOLING AND OF THE AUSTEMPERING ON A MICROSTRUCTURE AND OF MECHANICAL PROPERTIES IN STEELS 17Cr2Mn2Si2MoV AND 29Cr2Mn2Si2MoV Abstract PDF
(Rus)
Iurchenko A.N., Simonov I.N., Mikriukov M.I.
PNRPU Mechanics Bulletin No 2 (2021) The Influence of the Friction-Sliding Coefficient of Support Structures and Parameters of Seismic Actions on Reactions and Reliability of Structures with Seismic Protection Abstract PDF
(Rus)
Abakarov A.D., Zainulabidova H.R.
Perm Journal of Petroleum and Mining Engineering Vol 19, No 2 (2019) THE INFLUENCE OF THE GEODYNAMIC REGIME ON THE GEOLOGICAL STRUCTURE AND PETROPHYSICAL CHARACTERISTICS OF THE PLIOCENE SEDIMENTS OF THE HAMAMDAG-DENIZ DEPOSIT OF THE BAKU ARCHIPELAGO Abstract PDF
(Rus)
PDF
(Eng)
Gurbanov V.S., Hasanov A.B., Sultanov L.A., Babayev M.S.
Construction and Geotechnics Vol 10, No 4 (2019) THE INFLUENCE OF THE METHOD OF LAYING PIPELINES ON THE ENERGY EFFICIENCY OF THE HEATING NETWORK Abstract PDF
(Rus)
Biryuzova E.A., Glukhanov A.S.
Bulletin PNRPU. Mechanical engineering, materials science Vol 22, No 2 (2020) The influence of the microstructure of the electrode-tool on the efficiency of EDM materialsprocess Abstract PDF
(Rus)
Shiryaev V.V., Ablyaz T.R., Schlykov E.S., Pustovalov D.O., Smolentsev E.V.
PNRPU Mechanics Bulletin No 5 (2023) THE INFLUENCE OF THE STRUCTURAL ORGANIZATION OF CHIRAL METAMATERIALS ON THEIR PHYSICAL AND MECHANICAL CHARACTERISTICS Abstract PDF
(Rus)
Akhmetshin L.R., Smolin I.Y.
Bulletin PNRPU. Mechanical engineering, materials science Vol 23, No 3 (2021) The influence of the technological oscillation parameters on the bead formation during wire-feed electron-beam additive manufacturing Abstract PDF
(Rus)
Gudenko A.V., Sliva A.P., Shishkin D.V.
PNRPU Mechanics Bulletin No 3 (2021) The Influence of thickness on residual flexural strength of composite with low-velocity impact damages: Experimental study Abstract PDF
(Rus)
Kudryavtsev O.A., Ignatova A.V., Olivenko N.A.
Construction and Geotechnics Vol 9, No 1 (2018) THE INFLUENCE OF WATER SATURATION OF CLAY SOIL’S BASE ON ADDITIONAL SETTLEMENTS OF A FIVE-STOREY BUILDING WITH A STRIP SHALLOW FOUNDATION Abstract
Kudasheva M.I., Kaloshina S.V., Zolotozubov D.G.
Construction and Geotechnics Vol 11, No 4 (2020) THE INNOVATIVE LABORATORY EQUIPMENT FOR ASSESSMENT OF A FROST HEAVE PHENOMENON OF THE SOILS Abstract PDF
(Rus)
Korshunov A.A., Churkin S.V., Nevzorov A.L.
Applied Mathematics and Control Sciences No 1 (2020) THE integrated rating mechanism APPLICATION TO THE DECISION OF THE PROJECT SELECTION PROBLEM Abstract PDF
(Rus)
Kataeva T.A.
Bulletin PNRPU. Mechanical engineering, materials science Vol 15, No 1 (2013) THE INTRODUCTION OF AUTOMATIC SUBMERGED ARC WELDING CIRCUMFERENTIAL AND LONGITUDINAL JOINTS ASSEMBLIES MADE OF STEEL WITH WELDED EDGES THICKNESS FROM 45 TO 70 MM Abstract PDF
(Rus)
Derevyannykh A.J., Kokoulin N.A., Borodulin A.A., Bayandin M.A., Dudarev S.E., Karatysh V.V.
2226 - 2250 of 2503 Items << < 85 86 87 88 89 90 91 92 93 94 > >> 

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies