Issue | Title | Abstract | File |
No 4 (2019) | New analytical solutions for vibration problem of thick plates | Abstract |
(Rus) |
Papkov S.O. | |||
No 1 (2019) | New Paradigms in Metals Fatigue Description | Abstract |
(Rus) |
Shanyavskiy A.A., Soldatenkov A.P. | |||
No 4 (2015) | NONAXISYMMETRIC DYNAMIC PROBLEM OF THE DIRECT PIEZOEFFECT FOR AXIALLY POLARIZED SOLID CYLINDER | Abstract |
(Rus) |
Shlyakhin D.A. | |||
No 2 (2016) | NON-AXISYMMETRIC EDGE BUCKLING OF CIRCULAR PLATES WHEN HEATED | Abstract |
(Rus) |
Goldstein R.V., Popov A.L., Kozintsev V.M., Chelyubeev D.A. | |||
No 3 (2023) | NON-CONTACT DEFORMATION WITH REVERSIBLE SURFACE PLASTIC DEFORMATION | Abstract |
(Rus) |
Zaides S.A., Nguyen N.N. | |||
No 1 (2017) | Nonlinear and coupled thermal effects during finite element simulation of contact thermo-force surface hardening | Abstract |
(Rus) |
Bagmutov V.P., Denisevich D.S., Zakharov I.N., Ivannikov A.Y. | |||
No 2 (2020) | Nonlinear dynamics and stages of damage of Ti6Al4V and Ti45Nb titanium alloys in very high cycle fatigue | Abstract |
(Rus) |
Bannikov M.V., Oborin V.A., Bilalov D.A., Naimark O.B. | |||
No 2 (2017) | NONLINEAR EQUILIBRIUM EQUATIONS OF THE CONICAL SHELL STIFFENED BY A DISCRETE SET OF FRAMES | Abstract |
(Rus) |
Dudchenko A.A., Sergeev V.N. | |||
No 4 (2019) | Nonstationary 1D Dynamics Problems for Heteromodular Elasticity with Piecewise-Linear Approximation of Boundary Conditions | Abstract |
(Rus) |
Dudko O.V., Lapteva A.A., Ragozina V.E. | |||
No 3 (2016) | Non-stationary axisymmetric waves in electromagnetoelastic space with a spherical cavity | Abstract |
(Rus) |
Vestyak V.A., Kuznetsova E.L., Tarlakovski D.V. | |||
No 4 (2019) | Non-stationary coupled axisymmetric thermoelasticity problem for a rigidly fixed round plate | Abstract |
(Rus) |
Shlyakhin D.A., Dauletmuratova Z.M. | |||
No 3 (2016) | Non-stationary problems for elastic half-plane with moving point of changing boundary conditions | Abstract |
(Rus) |
Tarlakovskii D.V., Fedotenkov G.V. | |||
No 3 (2016) | Normal and shear stresses estimation in deformed metals based on infrared thermography data | Abstract |
(Rus) |
Terekhina A.I., Kostina A.A., Plekhov O.A. | |||
No 4 (2016) | Nucleation recrystallization mechanisms in metals at thermomechanical processing | Abstract |
(Rus) |
Kondratev N.S., Trusov P.V. | |||
No 3 (2020) | Numerical algorithm for searching for layouts of electroelastic bodies with external electric circuits for obtaining the best damping properties | Abstract |
(Rus) |
Iurlova N.A., Oshmarin D.A., Sevodina N.V., Iurlov M.A. | |||
No 1 (2013) | Numerical algorithm of solving the problem of large elastic-plastic deformation by FEM | Abstract |
(Rus) |
Davydov R.L., Sultanov L.U. | |||
No 2 (2021) | Numerical Algorithms for Simulation of a Fluid-Filed Fracture Evolution in a Poroelastic Medium | Abstract |
(Rus) |
Borisov V.E., Ivanov A.V., Kritsky B.V., Savenkov E.B. | |||
No 4 (2016) | Numerical analysis of dynamic strength of composite cylindrical shells under multiple-pulse exposures | Abstract |
(Rus) |
Abrosimov N.A., Elesin A.V. | |||
No 4 (2016) | Numerical analysis of poroviscoelastic prismatic solids and halfspaces dynamics via boundary element method | Abstract |
(Rus) |
Ipatov A.A., Belov A.A., Litvinchuk S.Y. | |||
No 4 (2020) | Numerical analysis of the spherical bearing geometric configuration with antifriction layer made of different materials | Abstract |
(Rus) |
Adamov A.A., Kamenskih A.A., Pankova A.P. | |||
No 2 (2013) | Numerical and experimental research the pressure drop in a pipe of variable cross section | Abstract |
(Rus) |
Syanov S.L. | |||
No 1 (2017) | Numerical and experimental study of composite bulkhead partition strength with in-situ x-ray monitoring | Abstract |
(Rus) |
Potrahov N.N., Anoshkin A.N., Zuiko V.Y., Osokin V.M., Pisarev P.V., Pelenev K.A. | |||
No 3 (2023) | NUMERICAL AND EXPERIMENTAL STUDY ON CFRP STRUCTURE OPTIMIZATION FOR COEFFICIENT OF THERMAL EXPANSION | Abstract |
(Rus) |
Pasechnik K.A., Obvertkin I.V., Vlasov A.Y. | |||
No 2 (2018) | Numerical damping of oscillations of beams by using multiple point actuators | Abstract |
(Rus) |
Atamuratov A.Z., Mikhailov I.E., Taran N.A. | |||
No 1 (2017) | Numerical investigation of a physically nonlinear problem of the longitudinal bending of the sandwich plate with a transversal-soft core | Abstract |
(Rus) |
Badriev I.B., Makarov M.V., Paimushin V.N. | |||
No 2 (2020) | Numerical Modeling of Electroelastic Fields in the Surface Piezoelectric Luminescent Optical Fiber Sensor to Diagnose Deformation of Composite Plates | Abstract |
(Rus) |
Pan’kov A.A., Pisarev P.V. | |||
No 1 (2022) | Numerical modeling of natural vibrations of coaxial shells partially filled with fluid, taking into account the effects on the free surface | Abstract |
(Rus) |
Bochkarev S.A., Lekomtsev S.V., Senin A.N. | |||
No 4 (2019) | Numerical modeling of nonlinear dynamic and static compression of the metal mesh | Abstract |
(Rus) |
Kochetkov A.V., Modin I.A., Leontev N.V., Turigina I.A., Poverennov E.Y. | |||
No 1 (2015) | NUMERICAL MODELLING OF PERFORATED SHELLS STABILITY | Abstract |
(Rus) |
Antipov A.A., Artemyeva A.A., Bazhenov V.G., Zhestkov M.N., Kibec A.I. | |||
No 4 (2018) | Numerical simulation for development of methodology of stress-strain state control of composite bulkhead for aviation application with the usage of FBG sensors | Abstract |
(Rus) |
Anoshkin A.N., Zuiko V.Y., Pelenev K.A., Pisarev P.V., Shipunov G.S. | |||
No 1 (2022) | Numerical simulation of brush seal tests | Abstract |
(Rus) |
Bondar V.S., Rodin E.V. | |||
No 4 (2020) | Numerical simulation of deformation and fracture of metal-matrix composites with considering residual stresses | Abstract |
(Rus) |
Zemlianov A.V., Evtushenko E.P., Balokhonov R.R. | |||
No 1 (2023) | NUMERICAL SIMULATION OF GAS-DYNAMIC AND STRENGTH CHARACTERISTICS OF A FAN FOR THE EXPERIMENTAL TEST RIG FOR INVESTIGATION OF ICE BREAKDOWN ON ROTATING WORKING BLADES | Abstract |
(Rus) |
Kalyulin S.L., Kalyulin N.A., Modorskii V.Y., Vladimirov N.V. | |||
No 6 (2023) | NUMERICAL SIMULATION OF THE INTERACTION BETWEEN A WAVE IN HYDROGEN AND A BARRIER IN A MODEL CHANNEL | Abstract |
(Rus) |
Seregina M.A., Babushkina A.V., Modorskii V.Y., Cherepanov I.E., Mikryukov A.O. | |||
No 3 (2022) | Numerical simulation of the nickel alloy microstructure formed in the process of hot fogging | Abstract |
(Rus) |
Rogovoy A.A., Salikhova N.K. | |||
No 3 (2019) | Numerical Simulation of the Phase Transition Control in Torsion of a Hollow Cylinder Made of Heusler Alloy | Abstract |
(Rus) |
Rogovoy A.A., Stolbova O.S. | |||
No 4 (2017) | Numerical solution for an inverse problem about determination of volumetric heat capacity of rock mass during artificial freezing | Abstract |
(Rus) |
Zhelnin M.S., Plekhov O.A., Semin M.A., Levin L.Y. | |||
No 1 (2018) | Numerical study of a thermomechanical behavior of a crystallizing polymer medium with regard to finite deformations | Abstract |
(Rus) |
Kulikov R.G., Kulikova T.G., Smetannikov O.Y. | |||
No 4 (2019) | Numerical study of the influence of gaps between tiles and backing type on overall high-velocity impact performance of a ceramic-faced protective structure | Abstract |
(Rus) |
Kudryavtsev O.A., Sapozhnikov S.B., Zhikharev M.V. | |||
No 2 (2016) | O geometricheski nelineynykh opredelyayushchikh sootnosheniyakh uprugogo materiala | Abstract | |
Trusov P.V., Kondrat'ev N.S., Shveykin A.I. | |||
No 3 (2013) | O reshenii zadachi ravnovesiya myagkoy setchatoy obolochki pri nalichii nagruzki, sosredotochennoy v tochke | Abstract |
(Rus) |
Badriev I.B., Banderov V.V., Zadvornov O.A. | |||
No 3 (2013) | OBZOR MATEMATIChESKIKh MODELEY DLYa OPISANIYa FAZOVYKh PREVRAShchENIY V STALYaKh | Abstract |
(Rus) |
Isupova I.L., Trusov P.V. | |||
No 4 (2020) | On a modeling stress-controlled surface growth of solids | Abstract |
(Rus) |
Izmaylova Y.O., Freidin A.B. | |||
No 4 (2015) | On account of scale effects in the simulation of mechanical and tribological properties of two-phase microand nanomodified polymer coatings | Abstract |
(Rus) |
Buznik V.M., Lurie S.A., Volkov-Bogorodskiy D.B., Knyazeva A.G., Solyaev Y.O., Popova E.I. | |||
No 2 (2014) | ON ASSYMETRIC MEASURES OF STRESS-STRAIN STATE AND HOOKE’S LAW | Abstract |
(Rus) |
Trusov P.V. | |||
No 4 (2015) | On delamination of a stipe along the boundary between two elastic layers Part 1, problem formulation, the case of normal crack | Abstract |
(Rus) |
Ustinov K.B. | |||
No 2 (2016) | On delamination of a strip along the boundary between two elastic layers. Part 2, Сase of shear crack | Abstract |
(Rus) |
Ustinov K.B. | |||
No 3 (2016) | On delamination of a stripe along the boundary between two elastic layers Part 3. Exact analytical solution for a particular case | Abstract |
(Rus) |
Ustinov K.B. | |||
No 3 (2018) | On Evaluating the State of Steel Specimens using Dynamic Spectrograms of Acoustic Signals | Abstract |
(Rus) |
Gubin V.V., Anikeev N.A., Dyachenko D.I. | |||
No 2 (2017) | On healing metal damages using high-energy pulsed electromagnetic field | Abstract |
(Rus) |
Kukudzhanov K.V. | |||
No 1 (2024) | ON IDENTIFICATION OF PARAMETERS OF A NONLINEAR CONSOLIDATION MODEL OF SANDY SOIL | Abstract |
(Rus) |
Artamonova N.B., Sheshenin S.V. | |||
No 1 (2020) | On modeling bodies with delaminating coatings taking into account the fields of prestresses | Abstract |
(Rus) |
Bogachev I.V., Vatulyan A.O. | |||
No 4 (2020) | On modeling of airflow in human lungs: constitutive relations to describe deformation of porous medium | Abstract |
(Rus) |
Trusov P.V., Zaitseva N.V., Tsinker M.Y. | |||
No 4 (2018) | On Modeling of Overhead TLC Galloping and Parametric Analysis of Pendulum Dampers Efficiency | Abstract |
(Rus) |
Sergey I.I., Vinogradov A.A., Danilin A.N., Kurdyumov N.N. | |||
No 1 (2019) | On Predicting Material and Structural Resources under Cyclic Loading | Abstract |
(Rus) |
Bondar V.S., Abashev D.R., Petrov V.K. | |||
No 1 (2016) | On strain hardening of cast iron with proportional and complex loading | Abstract |
(Rus) |
Rychkov B.A., Goncharova I.V., Volkov A.V. | |||
No 4 (2020) | On stress-affected kinetics of intermetallic compound growth in the presence of electromigration | Abstract |
(Rus) |
Shtegman V.O., Morozov A.V., Freidin A.B., Müller W.H. | |||
No 1 (2022) | ON THE CONVEXITY OF POTENTIAL OF NONLINEAR ELASTIC MEDIA MODEL WITH TENSOR DAMAGE PARAMETER | Abstract |
(Rus) |
Panteleev I.A., Lyakhovsky V. | |||
No 3 (2022) | ON THE INFLUENCE OF THE MECHANICAL CHARACTERISTICS OF A THIN ADHESION LAYER ON THE COMPOSITE STRENGTH. PART 1. ELASTIC DEFORMATION | Abstract |
(Rus) |
Bogacheva V.E., Glagolev V.V., Glagolev L.V., Markin A.A. | |||
No 3 (2023) | ON THE INFLUENCE OF THE MECHANICAL CHARACTERISTICS OF A THIN ADHESION LAYER ON THE COMPOSITE STRENGTH. PART 2. ELASTIC-plastic DEFORMATION | Abstract |
(Rus) |
Bogacheva V.E., Glagolev V.V., Glagolev L.V., Markin A.A. | |||
No 1 (2013) | On the mechanism of excitation of self-oscillations in gas flow heat supply | Abstract |
(Rus) |
Basok B.I., Gotsulenko V.V. | |||
No 1 (2023) | ON THE RECONSTRUCTION OF PRESTRESS FIELDS IN A HOLLOW CYLINDER | Abstract |
(Rus) |
Nedin R.D., Yurov V.O. | |||
No 2 (2023) | ON THE REDUCIBILITY OF SOLUTIONS FOR THE GENERALIZED YIELD CRITERION TO SOLUTIONS FOR TRESCA’S YIELD CRITERION UNDER AXIAL SYMMETRY | Abstract |
(Rus) |
Lyamina E.A., Kalenova N.V., Pirumov A.R. | |||
No 4 (2020) | On the specifics of behavior of the sandwich plate composite facing layers under local loading | Abstract |
(Rus) |
Paimushin V.N., Kayumov R.A., Shakirzyanov F.R., Kholmogorov S.A. | |||
No 2 (2021) | On the Theory of Elasticity of Microinhomogeneous Media with Account for Stochastic Changes in the Connectivity of Constituent Components | Abstract |
(Rus) |
Saraev L.A. | |||
No 4 (2014) | Optimal support of rigid-plastic singly and doubly connected polygonal plates | Abstract |
(Rus) |
Romanova T.P. | |||
No 4 (2018) | Optimization of mechanical characteristics of models of laminate composites using embedded optical fiber strain sensors | Abstract |
(Rus) |
Tashkinov M.A., Matveenko V.P. | |||
No 2 (2014) | Optimization of parameters of layered plates during dynamic hard indenter penetration with friction and weakining effect of free surfaces | Abstract |
(Rus) |
Aptukov V.N., Khasanov A.R. | |||
No 1 (2013) | Optimization of the press tool by production of low-temperature superconductors | Abstract |
(Rus) |
Kolmogorov H.L., Kosheleva N.A., Chernova T.V. | |||
No 2 (2013) | Oscillation-induced suspension of solids in fluid and loose media | Abstract |
(Rus) |
Blekhman L.I. | |||
No 4 (2013) | Osobennosti mekhanicheskogo povedeniya armko-zheleza pri ispytanii v rezhime gigatsiklovoy ustalosti | Abstract |
(Rus) |
Vshivkov A.N., Prokhorov A.E., Uvarov S.V., Plekhov O.A. | |||
No 4 (2016) | Packaging and deployment of large shell structures by internal pressure loading | Abstract |
(Rus) |
Pestrenin V.M., Pestrenina I.V., Rusakov S.V., Kondyurin A.V., Korepanova A.V. | |||
No 1 (2013) | Parameters of process of machining into account temperature models | Abstract |
(Rus) |
Kuznetsova E.V., Vavel A.Y. | |||
No 2 (2023) | PECULIARITIES OF SH WAVE PROPAGATION IN A TWO-LAYER STRUCTURE OF INHOMOGENEOUS PIEZOELECTRIC AND DIELECTRIC LAYERS | Abstract |
(Rus) |
Belyankova T.I., Vorovich E.I., Kalinchuk V.V. | |||
No 4 (2017) | Perturbation of the stress-strain state of an elastic half-space by the spherical inhomogeneity of elastic properties under shear in horizontal plane taking account of gravitational forces | Abstract |
(Rus) |
Panteleev I.A., Poltavceva E.V., Mubassarova V.A., Gavrilov V.A. | |||
No 1 (2023) | PHENOMENOLOGICAL KINETIC EQUATION OF THE CONVERSION FOR A BINDER OF COMPOSITE MATERIALS BASED ON ISOTHERMAL TESTS | Abstract |
(Rus) |
Kondyurin A.V., Pestrenin V.M., Pestrenina I.V., Landik L.V. | |||
No 1 (2023) | PLANE PROBLEMS ABOUT THE ACTION OF OSCILLATING LOAD ON THE BOUNDARY OF AN ELASTIC ISOTROPIC LAYER IN THE PRESENCE OF SURFACE STRESSES | Abstract |
(Rus) |
Kalinina T.I., Nasedkin A.V. | |||
No 2 (2022) | Plane-Strain Extrusion of a Green Type Porous Plastic Material through a Wedge-Shaped Die | Abstract |
(Rus) |
Sevastyanov G.M. | |||
No 1 (2018) | Plastic deformation of materials sensitive to a type of stress state | Abstract |
(Rus) |
Bondar V.S., Abashev D.R. | |||
No 2 (2019) | Plastic stress intensity factor in fracture mechanics | Abstract |
(Rus) |
Zakharov A.P., Shlyannikov V.N., Ishtyryakov I.S. | |||
No 3 (2017) | Plasticity of materials under proportional and nonproportional cyclic loading | Abstract |
(Rus) |
Bondar V.S., Abashev D.R., Petrov V.K. | |||
No 3 (2022) | Postbuckling Behavior of Compressed Bars with Nonlinearly Elastic Supports | Abstract |
(Rus) |
Kayumov R.A. | |||
No 3 (2013) | POVYShENIE DOLGOVEChNOSTI TITANOVOGO DISKA KOMPRESSORA S POMOShch'Yu UPRAVLENIYa STRUKTUROY SPLAVA V PRIPOVERKhNOSTNOM SLOE | Abstract |
(Rus) |
Burago N.G., Nikitin I.S. | |||
No 4 (2022) | PREDICTION OF THE BEARING CAPACITY OF THE HIP JOINT ENDOPROSTHESIS FROM THE С/C COMPOSITES | Abstract |
(Rus) |
Razumovskii E.S., Shavshukov V.E., Anoshkin A.N. | |||
No 3 (2017) | Processing fine magnesium materials. Numerical simulation and experimental analyses | Abstract |
(Rus) |
Aptukov V.N., Romanov P.V., Skryabina N.E., Fruchart D. | |||
No 1 (2023) | PROGRAMMABLE BEHAVIOR OF THE METAMATERIAL BY KINDS OF UNIT CELLS CONNECTION | Abstract |
(Rus) |
Akhmetshin L.R., Smolin I.Y. | |||
No 4 (2020) | Propagation of non-stationary antisymmetric kinematic perturbations from a spherical cavity in Cosserat medium | Abstract |
(Rus) |
Tarlakovskii D.V., Nguyen V.L. | |||
No 4 (2013) | Raschet gidratonasyshchennosti po dannym izmereniy khloridnosti v morskikh donnykh otlozheniyakh | Abstract |
(Rus) |
Goldobin D.S., Pimenova A.V. | |||
No 2 (2016) | Rationale of the use of the constructive anisotropy method in the calculation of shallow shells of double curvature, weakened holes | Abstract |
(Rus) |
Kamenev I.V., Semenov A.A. | |||
No 4 (2022) | REFINED DISCRETE METHOD FOR CALCULATING STIFFENED ORTHOTROPIC SHELLS | Abstract |
(Rus) |
Semenov A.A. | |||
No 6 (2023) | REFINED MODEL OF THERMOELASTIC-PLASTIC DYNAMIC DEFORMATION OF FLEXIBLE REINFORCED CYLINDRICAL SHELLS | Abstract |
(Rus) |
Yankovskii A.P. | |||
No 3 (2023) | REGULARITIES OF FATIGUE FAILURE TYPICAL COMPOSITE FLANGE | Abstract |
(Rus) |
Solomonov D.G., Sazhenkov N.A., Konev I.P., Toropicina A.V., Nikhamkin M.S. | |||
No 4 (2018) | RELIABILITY ASSESSMENT OF MULTILAYER PIPES FROM POLYMER MATERIALS | Abstract |
(Rus) |
Bochkareva S.A., Grishaeva N.Y., Lyukshin B.A., Lsukshin P.A., Matolygina N.Y., Panin S.V., Reutov Y.A. | |||
No 1 (2023) | REPRESENTATIVE VOLUME AND EFFECTIVE MATERIAL CHARACTERISTICS OF PERIODIC AND STATISTICALLY UNIFORMLY REINFORCED FIBER COMPOSITES | Abstract |
(Rus) |
Pestrenin V.M., Pestrenina I.V., Landik L.V., Fagalov A.R., Pelevin A.G. | |||
No 2 (2021) | Research and Modeling of Viscoelastic Behavior of Elastomeric Nanocomposites | Abstract |
(Rus) |
Kislitsyn V.D., Mokhireva K.A., Shadrin V.V., Svistkov A.L. | |||
No 2 (2019) | Research methods of structural and phase transformations in nanomaterials deformed under pressure | Abstract |
(Rus) |
Vasil’ev L.S., Lomaev S.L. | |||
No 2 (2015) | Research of influence of barrier crest on polymer extrusion process | Abstract |
(Rus) |
Ershov S.V., Chernyaev V.V. | |||
No 4 (2020) | Research of the asymmetric rolling of workpieces | Abstract |
(Rus) |
Ashkeyev Z.A., Andreyachshenko V.A., Bukanov Z.U. | |||
No 3 (2015) | Researching stages of destruction of titanium alloys during highand gigacycle fatigue by analyzing morphology of fracture surfaces | Abstract |
(Rus) |
Bannikov M.V., Oborin V.A., Naimark O.B. | |||
No 2 (2013) | Residual stresses in preform of stress applying part for Panda type optical fiber with considering of technological imperfections of doping | Abstract |
(Rus) |
Semenov N.V., Trufanov A.N., Trufanov N.A. | |||
401 - 500 of 659 Items | << < 1 2 3 4 5 6 7 > >> |