| Issue |
Title |
| Vol 23, No 3 (2021) |
The influence of the technological oscillation parameters on the bead formation during wire-feed electron-beam additive manufacturing |
|
|
Gudenko A.V., Sliva A.P., Shishkin D.V. |
| Vol 17, No 1 (2015) |
Investigation of influence of structural on the stress-strain state in the process of pressure treatment |
|
|
Baryshnikov M.P., Chukin M.V., Boiko A.B. |
| Vol 17, No 1 (2015) |
Plasma welding penetration arc with wire feeding nonferrous metals and complex alloys |
|
|
Schitcyn Y.D., Belinin D.S., Gilev I.A. |
| Vol 17, No 2 (2015) |
Simulation of the process of arc welding by the powder wire |
|
|
Votinova E.B., Shalimov M.P. |
| Vol 18, No 2 (2016) |
WEAR RESISTANCE OF ARC SPRAYED COATINGS TYPE OF Fe-C-Cr-Ti-Al AFTER PLASMA REMELTING |
|
|
Verkhorubov V.S., Nevezhin S.V., Korobov I.S., Neulybin S.D., Terent’ev S.A., Shchitsyn I.D. |
| Vol 21, No 1 (2019) |
Features of structure formation of heat-resistant weld metal based on Ni3Al |
|
|
Zorin I.V., Sokolov G.N., Lysak V.I., Dubcov U.N., Denisevich D.S., Fastov S.A. |
| Vol 21, No 1 (2019) |
Development of technology and flux-cored wire for arc welding of high-strength alloy steels |
|
|
Shalimov M.P., Berezovsky A.V., Smolentsev A.S. |
| Vol 21, No 1 (2019) |
SETTLEMENT AND EXPERIMENTAL METHOD OF ESTIMATION OF PARAMETERS OF TRANSITION ELEMENTS IN THE WELD METAL DURING ARC WELDING AND IMPROVING THE WHOLE CHARGE FLUX CORED WIRE |
|
|
Shalimov M.P., Votinova E.B. |
| Vol 21, No 4 (2019) |
MULTIPLE-LAYER ELECTRON BEAM SURFACING BY WIRE MATERIAL |
|
|
Varushkin S.V., Trushnikov D.N., Salomatova E.S., Belenkiy V.Y., Permyakov G.L. |
| Vol 22, No 1 (2020) |
The mechanical properties of the material deposited on a plate of steel with high carbon equivalent |
|
|
Abashkin E.E., Zhilin S.G., Komarov O.N. |
| 1 - 10 of 10 Items |
|
