In article it is considered without inertial system of regulation of the radial size in the course of a honing of openings which consists of elastic links. For without inertial system of regulation of the radial size the dynamic analysis was carried out. Behind results which were the transitional characteristic and diagram Bode is received. On the basis of the received characteristics it was defined that in system in the conditions of transient there is no inertial effect. For confirmation of the received theoretical assumptions a series of pilot studies of process of regulation of the radial size with use without inertial system was carried out. As a result of the conducted research it was established that in the course of regulation there is a hysteresis between the characteristic of a gain and falling of a contact pressure at processing. The caused results of a pilot study confirm theoretical assumptions taking into account that the throttling distributor with straight-line characteristics will be used further.

cylindrical spiral spring hone, system of regulation of the radial size, dynamic characteristics, contact pressure, without inertial effect.