| Issue |
Title |
| Vol 21, No 1 (2019) |
HEAT PHENOMENA AND THEIR INFLUENCE ON ENERGY AND FORCE PARAMETERS OF THE THERMOFRICTIONAL HARDENING |
|
|
Pokintelitsa N.I., Levchenko E.A. |
| Vol 19, No 3 (2017) |
The comparison research of plasma surface hardening of 34CrNiMo6 steel produced on direct polarity and reversed polarity current |
|
|
Shitsyn Y.D., Belinin D.S., Neulybin S.D., Sinani I.L., Terentyev S.A., Verkhorubov V.S. |
| Vol 21, No 4 (2019) |
STRUCTURAL-PHASE STATE OF UFG TITANIUM IMPLANTED WITH ALUMINUM IONS |
|
|
Nikonenko A.V., Popova N.A., Nikonenko E.L., Kalashnikov M.P., Oks E.M., Kurzina I.A. |
| Vol 20, No 3 (2018) |
36NKhTYu alloy to EP517 steel dissimilar welded joints structural strength increase due to optimization of weld seam dimensions |
|
|
Terentyev E.V., Marchenkov A.Y., Sliva A.P., Goncharov A.L. |
| Vol 22, No 2 (2020) |
Simulation of the microstructure of aluminum bronze CuAlFe 9-4 providing increased resistance to wear |
|
|
Svyatkin A.V., Popova L.I., Shenderei P.E. |
| Vol 20, No 3 (2018) |
Application of high-frequency induction heating for increasing crack resistance in the welding of hardening steels |
|
|
Orlov A.S., Pomerantsev A.S., Sizintsev S.V. |
| Vol 23, No 3 (2021) |
Improving the reliability of oilfield and drilling equipment through integrated design and technological support for the manufacture and assembly of threaded connections |
|
|
Pesin M.V., Makarov V.F., Khalturin O.A., Pavlovich A.A., Melnikov A.S., Makarenkov E.S. |
| Vol 20, No 4 (2018) |
Technological recommendations about laser heat threatmens of powder pseudo-alloy FeC1Cu15 |
|
|
Morozov E.A., Oglezneva S.A. |
| Vol 21, No 1 (2019) |
THE RESULTS OF THE STUDY OF THE INFLUENCE OF HARDNESS AND MICROSTRUCTURE OF THE LOCOMOTIVE BRAKE PADS FOR EXTREME BRAKING OF THE LOCOMOTIVE |
|
|
Klimov A.A., Struchkov A.V. |
| Vol 21, No 1 (2019) |
The practice of using electron beam technologies of welding, hardening and surfacing of protective coatings in vacuum at the defense industry enterprises |
|
|
Radchenko M.V., Shevtsov Y.O., Radchenko T.B. |
| Vol 21, No 2 (2019) |
INFLUENCE OF ULTRASOUND IMPACT IN THE PROCESS OF THE STACKING CYCLE, ON THE PROPERTIES AND STRUCTURE OF THE SURFACED METAL FROM 12Cr18Ni10Ti STEEL |
|
|
Shitsyn Y.D., Neulybin S.D., Belinin D.S., Nikulin R.G., Karunakaran K.P. |
| Vol 18, No 3 (2016) |
Structure and mechanical properties of low-carbon martensitic steels hardened from a temperature the critical interval and after isothermal tempering |
|
|
Berezin S.K. |
| Vol 21, No 3 (2019) |
THE INFLUENCE OF LASER TREATMENT OF POWDER STEEL PA-ZHGR ON THE GEOMETRIC PARAMETERS OF THE LASER EXPOSURE ZONE |
|
|
Usynin E.V., Oglezneva S.A., Morozov E.A. |
| Vol 18, No 3 (2016) |
PROCESS ELECTRIC-SPARK CARBURIZING IN AN ULTRASONIC FIELD |
|
|
Shevchenko O.I., Trekin G.E. |
| Vol 21, No 3 (2019) |
INFLUENCE OF DEFORMATION PARAMETERS OF CYLINDRICAL BODIES BY JOINT TENSION AND TORSION ON THE DISTRIBUTION OF RESIDUAL STRESSES |
|
|
Kryukov A.A., Wildemann V.E. |
| Vol 18, No 3 (2016) |
A comparison of solid-hardened and nitride-hardened nitrided chromium-nickel-based alloy based on a mathematical model |
|
|
Ding K.J., Semenov M.Y. |
| Vol 21, No 4 (2019) |
EXPRESS METHOD FOR ASSESSING THE QUALITY OF A STRENGTHENED METAL PRODUCTS LAYER USING HIGH-FREQUENCY CURRENTS |
|
|
Maleronok V.V., Alifanov A.V. |
| 1 - 17 of 17 Items |
|
