Issue |
Title |
Vol 20, No 3 (2018) |
Penetration control for welding on analytical mathematical model of heat distribution |
|
Sidorov V.P., Melzitdinova A.V. |
Vol 14, No 4 (2012) |
RESEARCH OF INFLUENCE OF OSCILLATING OF THE ELECTRONIC BUNCH ON THE CHEMICAL COMPOSITION OF METAL OF THE WELD BEAD AT ELECTRON BEAM WELDING OF STEEL 12Х18Н10Т |
|
Salomatova E.S. |
Vol 21, No 1 (2019) |
Features of structure formation of heat-resistant weld metal based on Ni3Al |
|
Zorin I.V., Sokolov G.N., Lysak V.I., Dubcov U.N., Denisevich D.S., Fastov S.A. |
Vol 15, No 1 (2013) |
Electron beam welding: from invention to OF OUR DAYS |
|
Salomatova E.S. |
Vol 21, No 1 (2019) |
SETTLEMENT AND EXPERIMENTAL METHOD OF ESTIMATION OF PARAMETERS OF TRANSITION ELEMENTS IN THE WELD METAL DURING ARC WELDING AND IMPROVING THE WHOLE CHARGE FLUX CORED WIRE |
|
Shalimov M.P., Votinova E.B. |
Vol 16, No 3 (2014) |
METHODS OF INFLUENCE ON OXIDE’S AND SULPHIDE’S CHARACTERISTICS IN WELD JOINTS OF LOW-ALLOYED STEEL |
|
Krivonosova E.A., Lodyagina T.V. |
Vol 21, No 1 (2019) |
Diagnostics of weld alloys for resistance to high-temperature gas-abrasive wear |
|
Artem'ev A.A., Zorin I.V., Sokolov G.N., Lysak V.I., Denisevich D.S., Priyatkin D.V. |
Vol 17, No 2 (2015) |
Simulation of the process of arc welding by the powder wire |
|
Votinova E.B., Shalimov M.P. |
Vol 21, No 3 (2019) |
STRUCTURAL PHASE CHANGES IN HEAT-AFFECTED ZONE OF 0.12C-1Cr-10Ni-1Ti-Fe STEEL AFTER MODULATED CURRENT WELDING |
|
Nikonenko E.L., Smirnov A.N., Popova N.A., Ababkov N.V., Knyaz'kov K.V. |
Vol 17, No 3 (2015) |
Plasma welding of aluminum alloys of small thicknesses |
|
Bazhenov A.M., Panov A.I., Gilev I.A. |
Vol 23, No 1 (2021) |
Effective power of bipolar argon arc with a tungsten electrode for aluminum welding |
|
Sidorov V.P., Sovetkin D.E. |
Vol 18, No 3 (2016) |
Studies consistently remove sulfur from the weld metal on the reactions of metal-slag-atmosphere using slag bases of mineral raw materials of Ural region |
|
Naumov S.V., Ignatova A.M., Ignatov M.N. |
Vol 23, No 2 (2021) |
Thermokinetic analysis of phase composition of welds aluminum alloy 1420 system Al-Mg-Li. Part 2. Thermokinetic analysis of phase composition of the weld made with AMg-6 wire |
|
Fedoseeva E.M., Olshanskaya T.V. |
Vol 18, No 3 (2016) |
The Features of Continuous X-Ray Signal in Electron Beam Welding with Oscillation of Electron Beam |
|
Varushkin S.V., Trushnikov D.N., Belenkiy V.Y., Permyakov G.L. |
Vol 23, No 3 (2021) |
Requirements for the arc welding parameters accuracy of a butt joint on an aluminum alloy |
|
Sidorov V.P., Melzitdinova A.V., Sovetkin D.E. |
Vol 18, No 4 (2016) |
Review of modern methods of management of the electron beam when the electron-beam welding |
|
Olshanskaya T.V., Salomatova E.S. |
Vol 23, No 3 (2021) |
The influence of the technological oscillation parameters on the bead formation during wire-feed electron-beam additive manufacturing |
|
Gudenko A.V., Sliva A.P., Shishkin D.V. |
Vol 14, No 3 (2012) |
Review of results of secondary-emission signal use for the weld formation monitoring and control in electron beam welding |
|
Piskunov A.L., Lyalin A.N., Schavlev V.E., Abdullin A.A. |
Vol 19, No 2 (2017) |
OSCILATION OF ELECTRON BEAM DURING ELECTRON BEAM WELDING FOR IMPROVING WELD ROOT AND EASYMENTING MELT-THROUGH MODE CONTROL |
|
Varushkin S.V., Belenkiy V.Y., Zyryanov N.A., Kylosov A.A. |
Vol 14, No 3 (2012) |
Technological features of the automatic submerged arc welding assembly units made of steel with the thickness of the welded edges from 4 to 60 mm |
|
Karatysh V.V., Kokoulin N.A., Derevyannykh A.J., Bayandin M.A., Dudarev S.E., Ljalin A.N. |
Vol 20, No 3 (2018) |
36NKhTYu alloy to EP517 steel dissimilar welded joints structural strength increase due to optimization of weld seam dimensions |
|
Terentyev E.V., Marchenkov A.Y., Sliva A.P., Goncharov A.L. |
Vol 14, No 4 (2012) |
THE FRACTRAL APPROACH TO THE ANALYSIS OF FEATURES OF WELD FATIGUE BREAKDOWN |
|
Rudakova O.A. |
1 - 22 of 22 Items |
|