| Issue |
Title |
| Vol 20, No 4 (2018) |
Research of the effect of rare-earth elements on ceramic materials based on ZrB2 - SiC (20 vol. %), obtained by spark plasma sinter |
|
|
Kulmetyeva V.B., Porozova S.E., Chuvashov V.E., Yaburov M.P. |
| Vol 21, No 1 (2019) |
SETTLEMENT AND EXPERIMENTAL METHOD OF ESTIMATION OF PARAMETERS OF TRANSITION ELEMENTS IN THE WELD METAL DURING ARC WELDING AND IMPROVING THE WHOLE CHARGE FLUX CORED WIRE |
|
|
Shalimov M.P., Votinova E.B. |
| Vol 21, No 3 (2019) |
EVALUATION OF TEMPERATURE FACTORS WHICH INFLUENT ON PERFORMANCE OF NEW GENERATION MAGNETORHEOLOGICAL SYSTEMS |
|
|
Naigert K.V., Tselischev V.A. |
| Vol 22, No 2 (2020) |
Elements of the internal system for assessing the quality of educational services of a university |
|
|
Selezneva A.V., Lobov N.V. |
| Vol 23, No 2 (2021) |
Thermokinetic analysis of phase composition of welds aluminum alloy 1420 system Al-Mg-Li. Part 2. Thermokinetic analysis of phase composition of the weld made with AMg-6 wire |
|
|
Fedoseeva E.M., Olshanskaya T.V. |
| Vol 18, No 1 (2016) |
The calculation of the length slag trap to the first feeder |
|
|
Labutin V.N., Pustovalov D.O., Sharov K.V., Bogomiagkov A.V., Belova S.A. |
| Vol 18, No 3 (2016) |
Structure and mechanical properties of low-carbon martensitic steels hardened from a temperature the critical interval and after isothermal tempering |
|
|
Berezin S.K. |
| Vol 18, No 3 (2016) |
Special features of the fracture surface of structural steel 09G2S after cold radial forging |
|
|
Shaimanov G.S., Simonov M.Y., Simonov Y.N., Pertsev A.S. |
| Vol 18, No 4 (2016) |
Comparative analysis of different models of the insulating polymer flow in the extruder screw channel |
|
|
Ershov S.V., Trufanova N.M., Lukin M.D. |
| Vol 19, No 1 (2017) |
CHANGE THE MICROSTRUCTURE OF SPARINGLY ALLOYED STEEL DEPENDING ON THE SPEED OF CONTINUOUS COOLING AND TEMPERATURE OF ISOTHERMAL HOLDING |
|
|
Iurchenko A.N., Panov D.O., Simonov I.N. |
| 1 - 10 of 10 Items |
|
