Issue |
Title |
Vol 16, No 2 (2014) |
REPLICATION TECHNOLOGY FEATURES OF PLASTIC PRODUCTS BY INJECTION OF TWO-COMPONENT COLD-POLYURETHANES SILICONE MOLD IN A VACUUM |
|
Shumkov A.A. |
Vol 22, No 1 (2020) |
The choice of unit cell for modeling the structure of the ceramic foam filter |
|
Bezdenezhnykh I.S., Matygullina E.V., Shumkov A.A. |
Vol 16, No 2 (2014) |
INTERACTION OF PHASES IN THE PHASE-SEPARATION PHASES PETRURGICAL MATERIAL DURING THE CRYSTALLIZATION PROCESS |
|
Ignatova A.M. |
Vol 16, No 2 (2014) |
RESEARCH OF INFLUENCE OF FLUORINE ON THE REDUCED IRON IN MELTING PROCESS FERRUM-SILICATE RAW |
|
Ignatova A.M. |
Vol 16, No 3 (2014) |
FORMATION OF STRUCTURE OF THE MATERIAL IN THE PROCESS OF gel-casting OF NANOPOWDER TITANIA |
|
Mischinov B.P., Porozova S.E. |
Vol 17, No 2 (2015) |
Development of advanced manufacturing technology PARTS OIL PUMP |
|
Morozov S.A., Morozov A.S. |
Vol 17, No 3 (2015) |
PHASE TRANSFORMATIONS AND FRACTURE MECHANISM OF SYNTHETIC MINERAL SUCH BASALT ALLOYS UNDER ACTION OF METAL IMPACTOR |
|
Ignatova A.M., Nikhamkin M.A., Voronov L.V., Ignatov M.N. |
Vol 18, No 1 (2016) |
FEATURES OF DESTRUCTION OF METAL TARGET AND NON-METAL PUNCHER IN HIGH SPEED CONNECTIVITY |
|
Ignatova A.M., Nikhamkin M.S., Voronov L.V., Ignatov M.N. |
Vol 19, No 2 (2017) |
Functional and technological scheme of production of manufacturing fluorophlogopite |
|
Yudin M.V., Nikolaev M.M., Ignatova A.M., Ignatov M.N. |
Vol 20, No 1 (2018) |
THE SEQUENCE OF PHASE AND STRUCTURAL TRANSFORMATIONS of FLUOR PHLOGOPITE RAW COMPOSITION |
|
Yudin M.V., Nikolaev M.M., Ignatova A.M., Ignatov M.N. |
Vol 20, No 3 (2018) |
Identification of potassium fluorophylate of the tested batch for compliance with the standard |
|
Yudin M.V., Ignatova A.M., Ignatov M.N. |
Vol 20, No 4 (2018) |
Optimization of gel-casting parameters in aquatic “Titania - PVA” solutions for 3d-printing |
|
Mishchinov B.P., Zigan'shin I.R., Porozova S.E. |
1 - 12 of 12 Items |
|