| Issue |
Title |
| Vol 20, No 3 (2018) |
FORMATION OF STRUCTURE AND PROPERTIES OF STEEL 04Сr18Ni9 AT ADDITIVE PRODUCTION OF TRAININGS |
|
|
Shchitsyn Y.D., Terentyev S.A., Neubybin S.D., Artemov A.O., Belinin D.S. |
| Vol 20, No 2 (2018) |
REDUCTION OF THE DEFECTS OF HEAT-RESISTANT NICKELS ALLOYS IN SURFACING TECHNOLOGIES |
|
|
Krivonosova E.A., Shchitsyn I.D., Akulova S.N., Myshkina A.V., Neulybin S.D., Belinin D.S. |
| Vol 24, No 1 (2022) |
INVESTIGATION OF THE STRUCTURE AND DEFECTIVENESS OF TITANIUM ALLOYS DURING SURFACING |
|
|
Homutinin I.S., Akulova S.N., Myshkina A.V., Krivonosova E.A., Lyamin Y.V. |
| Vol 21, No 2 (2019) |
USE OF PLASMA SURFACE FOR ADDITIVE FORMATION OF ALUMINUM ALLOYS BLADE |
|
|
Shchitsin Y.D., Krivonosova E.A., Neulubin S.D., Olshanskaya T.V., Nikulin R.G., Fedoseeva E.M., Terentyev S.A. |
| Vol 21, No 4 (2019) |
MULTIPLE-LAYER ELECTRON BEAM SURFACING BY WIRE MATERIAL |
|
|
Varushkin S.V., Trushnikov D.N., Salomatova E.S., Belenkiy V.Y., Permyakov G.L. |
| Vol 18, No 2 (2016) |
CREATING COMPOSITE MATERIALS BASED ON HIGH-NICKEL ALLOYS WITH THE USE OF A PLASMA ARC AT CURRENT REVERSE POLARITY |
|
|
Shchitsyn I.D., Belinin D.S., Neulybin S.D., Terent’ev S.A., Efimova A.A. |
| Vol 23, No 2 (2021) |
Influence of current frequency during pulse layer plasma surface on the structure and properties of high-alloy steel during additive formation of products |
|
|
Dushina A.Y., Olshanskaya T.V., Neulybin S.D., Shchitsyn Y.D., Nikulin R.G. |
| Vol 18, No 4 (2016) |
COMPARATIVE ANALYSIS OF CORROSION- AND WEAR RESISTANT PRODUCTS FROM COMPOSITE METAL STEEL-COPPER MADE BY PLASMA SURFACING AT CURRENTS DIRECT AND REVERSE POLARITY |
|
|
Schitsyn Y.D., Belinin D.S., Neulybin S.D., Terentyev S.A. |
| Vol 23, No 3 (2021) |
ABOUT INFLUENCE OF PLASMA SURFACE SCHEMES ON THE FORMATION OF THE STRUCTURE AND PROPERTIES OF TITANIUM ALLOY |
|
|
Akulova S.N., Myshkina A.V., Varushkin S.V., Neulybin S.D., Krivonosova E.A., Shchitsyn Y.D., Olshanskaya T.V. |
| Vol 19, No 4 (2017) |
PLASMA SURFACING: MATHEMATICAL MODEL, NUMERICAL IMPLEMENTATION AND VERIFICATION |
|
|
Neulybin S.D., Permyakov G.L., Trushnikov D.N., Shchitsyn I.D., Belenkiy V.Y., Belinin D.S. |
| Vol 20, No 2 (2018) |
Influence of the thermal mode at joint arc and aluminothermic impact on formation of structure and properties of built-up metal |
|
|
Abashkin E.E., Zhilin S.G., Komarov O.N., Tkacheva A.V. |
| Vol 21, No 2 (2019) |
INFLUENCE OF ULTRASOUND IMPACT IN THE PROCESS OF THE STACKING CYCLE, ON THE PROPERTIES AND STRUCTURE OF THE SURFACED METAL FROM 12Cr18Ni10Ti STEEL |
|
|
Shitsyn Y.D., Neulybin S.D., Belinin D.S., Nikulin R.G., Karunakaran K.P. |
| Vol 16, No 3 (2014) |
PLASMA SURFACING OF HIGH-ALLOY STEEL 10Cr18Ni8Ti ON LOW-ALLOY STEEL 09Mg2Si |
|
|
Shchitsyn Y.D., Neulybin S.D., Kuchev P.S., Gilev I.A. |
| Vol 22, No 2 (2020) |
Effective power of direct polarity arc with non-consumable electrode |
|
|
Sidorov V.P., Sovetkin D.E., Melzitdinova A.V. |
| Vol 18, No 2 (2016) |
WEAR RESISTANCE OF ARC SPRAYED COATINGS TYPE OF Fe-C-Cr-Ti-Al AFTER PLASMA REMELTING |
|
|
Verkhorubov V.S., Nevezhin S.V., Korobov I.S., Neulybin S.D., Terent’ev S.A., Shchitsyn I.D. |
| Vol 22, No 3 (2020) |
Application of the normalized diagram to simulate additive surfacing using energy beam sources |
|
|
Letyagin I.Y., Trushnikov D.N., Belenkiy V.Y., Erikov A.P., Olshanskaya T.V. |
| 1 - 16 of 16 Items |
|
