| Issue |
Title |
| Vol 18, No 4 (2016) |
Review of modern methods of management of the electron beam when the electron-beam welding |
|
|
Olshanskaya T.V., Salomatova E.S. |
| Vol 20, No 3 (2018) |
CREATION OF MODELS OF THE SOLUTION OF THERMAL PROBLEMS OF ELECTRON BEAM WELDING WITH FLUCTUATIONS OF THE BEAM |
|
|
Olshanskaya T.V., Fedoseeva E.M. |
| Vol 18, No 4 (2016) |
Monitoring of welding channel in the x-ray spectrum during the electron beam welding |
|
|
Braverman V.Y. |
| Vol 16, No 4 (2014) |
Simulation and optimization Electron beam welding steels |
|
|
Mladenov G., Koleva E., Belenkiy V.Y., Trushnikov D.N. |
| Vol 19, No 3 (2017) |
Creation of thermal models at electron beam welding by method of functions of Green |
|
|
Olshanskaya T.V., Fedoseeva E.M., Koleva E.G. |
| Vol 23, No 3 (2021) |
The influence of the technological oscillation parameters on the bead formation during wire-feed electron-beam additive manufacturing |
|
|
Gudenko A.V., Sliva A.P., Shishkin D.V. |
| Vol 14, No 3 (2012) |
Review of results of secondary-emission signal use for the weld formation monitoring and control in electron beam welding |
|
|
Piskunov A.L., Lyalin A.N., Schavlev V.E., Abdullin A.A. |
| Vol 19, No 2 (2017) |
OSCILATION OF ELECTRON BEAM DURING ELECTRON BEAM WELDING FOR IMPROVING WELD ROOT AND EASYMENTING MELT-THROUGH MODE CONTROL |
|
|
Varushkin S.V., Belenkiy V.Y., Zyryanov N.A., Kylosov A.A. |
| Vol 14, No 3 (2012) |
INVESTIGATION OF GEOMETRICAL CHARACTERISTICS AND THE MICROSTRUCTURE OF WELDS AT ELECTRON BEAM WELDING OF STEEL 12Х18Н10Т WITH THE ELECTRON BEAM OSCILLATION |
|
|
Salomatova E.S., Belenkiy V.Y., Trushnikov D.N., Olshanskaya T.V. |
| Vol 14, No 4 (2012) |
RESEARCH OF INFLUENCE OF OSCILLATING OF THE ELECTRONIC BUNCH ON THE CHEMICAL COMPOSITION OF METAL OF THE WELD BEAD AT ELECTRON BEAM WELDING OF STEEL 12Х18Н10Т |
|
|
Salomatova E.S. |
| Vol 21, No 4 (2019) |
MULTIPLE-LAYER ELECTRON BEAM SURFACING BY WIRE MATERIAL |
|
|
Varushkin S.V., Trushnikov D.N., Salomatova E.S., Belenkiy V.Y., Permyakov G.L. |
| Vol 22, No 3 (2020) |
Application of the normalized diagram to simulate additive surfacing using energy beam sources |
|
|
Letyagin I.Y., Trushnikov D.N., Belenkiy V.Y., Erikov A.P., Olshanskaya T.V. |
| Vol 20, No 3 (2018) |
36NKhTYu alloy to EP517 steel dissimilar welded joints structural strength increase due to optimization of weld seam dimensions |
|
|
Terentyev E.V., Marchenkov A.Y., Sliva A.P., Goncharov A.L. |
| Vol 17, No 4 (2015) |
Influence of welding parameters on changes in the chemical composition of the welded joints in electron beam welding, electron beam with oscillation |
|
|
Salomatova E.S., Ol'shanskaia T.V., Trushnikov D.N., Belenkii V.I., Mladenov G.M. |
| Vol 21, No 1 (2019) |
The practice of using electron beam technologies of welding, hardening and surfacing of protective coatings in vacuum at the defense industry enterprises |
|
|
Radchenko M.V., Shevtsov Y.O., Radchenko T.B. |
| Vol 18, No 3 (2016) |
EBW assumed manufacturing process of vacuum chambers for the FAIR project |
|
|
Medvedev A.M., Semenov A.M., Semenov Y.I., Sizov M.M., Starostenko A.A., Tsyganov A.S. |
| Vol 18, No 3 (2016) |
The Features of Continuous X-Ray Signal in Electron Beam Welding with Oscillation of Electron Beam |
|
|
Varushkin S.V., Trushnikov D.N., Belenkiy V.Y., Permyakov G.L. |
| Vol 16, No 3 (2014) |
FEATURES OF CRYSTALLIZATION OF WELDED SEAMS FROM DIVERSE MATERIALS AT ELECTRON BEAM WELDING ON THE EXAMPLE OF HIGHLY CHROMIC STEEL WITH BRONZE |
|
|
Olshanskaya T.V. |
| Vol 23, No 2 (2021) |
Possibilities of additive technologies application in designing and manufacturing of weapons of military equipment |
|
|
Voynov P.S., Belenkiy V.Y., Belinin D.S., Varushkin S.V. |
| 1 - 19 of 19 Items |
|
