| Issue |
Title |
| Vol 22, No 2 (2020) |
Calculation of TTT diagrams of isothermal austenite decomposition in structural steels |
|
|
Okishev K.Y. |
| Vol 18, No 2 (2016) |
INVESTIGATION OF THE EFFECT OF GRAIN SIZE AUSTENITE ON PHASE TRANSFORMATION TEMPERATURE IRON-BASED ALLOYS |
|
|
Oglezneva S.A., Saenkov K.L. |
| Vol 21, No 3 (2019) |
DETERMINATION OF CRITICAL TEMPERATURES AC1 AND AC3 IN STEELS ALLOYING SYSTEM H2G2S2MF USING THE DILATOMETRIC METHOD AND THE METHOD OF TESTING QUENCHING |
|
|
Iurchenko A.N., Marieva M.A., Grebenkin R.D., Simonov I.N. |
| Vol 18, No 2 (2016) |
The using of quasi-static magnetic hysteresis loops to control steel structures |
|
|
Novikov V.F., Neradovskii D.F., Sokolov R.A. |
| Vol 18, No 3 (2016) |
Structure and mechanical properties of low-carbon martensitic steels hardened from a temperature the critical interval and after isothermal tempering |
|
|
Berezin S.K. |
| Vol 23, No 1 (2021) |
Structure of joints of medium-carbon steel after friction welding and surfacing |
|
|
Laptev S.K., Shatsov A.A., Grebenkov S.K. |
| Vol 18, No 3 (2016) |
MICROSTRUCTURAL FEATURES, MECHANICAL PROPERTIES AND HEAT TREATMENT OF BAINITIC STEEL |
|
|
Yurchenko A.N., Simonov Y.N. |
| Vol 18, No 3 (2016) |
PROCESS ELECTRIC-SPARK CARBURIZING IN AN ULTRASONIC FIELD |
|
|
Shevchenko O.I., Trekin G.E. |
| Vol 16, No 1 (2014) |
Structure and mechanical properties formation of the hot-forged low-carbon martensitic steel |
|
|
Romanov I.D., Shatsov A.A., Zakirova M.G. |
| Vol 18, No 3 (2016) |
Structure and properties of Ni47Mn42In11 alloy AFTER THERMOCYCLIC TREATMENT |
|
|
Kaletina Y.V., Efimova E.D., Gerasimov E.G., Kaletin A.Y., Fokina E.A. |
| Vol 16, No 1 (2014) |
STUDY OF TRANSFORMATIONS AND STRUCTURES OF SILICON STEELS AFTER ISOTHERMAL EXPOSURE AT DIFFERENT TEMPERATURES |
|
|
Leontiev P.A., Simonov Y.N., Ivanova A.S. |
| Vol 18, No 4 (2016) |
INFLUENCE OF TEMPERING ON THE PROPERTIES OF CARBIDE-FREE-BAINITE STEELS |
|
|
Kaletin A.Y., Kaletina Y.V., Simonov Y.N. |
| Vol 16, No 4 (2014) |
INVESTIGATION OF STRUCTURE AND PROPERTIES OF CARBURIZED LAYERS IN LOW-CARBON CARBURIZING STEELS |
|
|
Ivanov A.S., Bogdanova M.V. |
| Vol 19, No 1 (2017) |
CHANGE THE MICROSTRUCTURE OF SPARINGLY ALLOYED STEEL DEPENDING ON THE SPEED OF CONTINUOUS COOLING AND TEMPERATURE OF ISOTHERMAL HOLDING |
|
|
Iurchenko A.N., Panov D.O., Simonov I.N. |
| Vol 16, No 4 (2014) |
NCREASE IN IMPACT STRENGTH OF STRUCTURAL STEELS BY THE CARBIDE-FREE-BAINITE FORMATION |
|
|
Kaletin A.Y., Kaletina Y.V. |
| Vol 19, No 3 (2017) |
INVESTIGATION OF PHYSICAL MECHANICAL PROPERTIES AND TEMPERATURES OF PHASE TRANSFORMATIONS OF POWDER FE-Ni ALLOYS |
|
|
Oglezneva S.A., Saenkov K.L., Grevnov L.M. |
| Vol 17, No 2 (2015) |
Austenite grain growth during heating type steel H3G3MFS And HN3MFS |
|
|
Abrosimova A.A., Panov D.O., Simonov Y.N. |
| Vol 21, No 1 (2019) |
Development of technology and flux-cored wire for arc welding of high-strength alloy steels |
|
|
Shalimov M.P., Berezovsky A.V., Smolentsev A.S. |
| Vol 18, No 1 (2016) |
THE INFLUENCE OF THE CONTINUOUS COOLING AND OF THE AUSTEMPERING ON A MICROSTRUCTURE AND OF MECHANICAL PROPERTIES IN STEELS 17Cr2Mn2Si2MoV AND 29Cr2Mn2Si2MoV |
|
|
Iurchenko A.N., Simonov I.N., Mikriukov M.I. |
| Vol 21, No 3 (2019) |
STRUCTURAL PHASE CHANGES IN HEAT-AFFECTED ZONE OF 0.12C-1Cr-10Ni-1Ti-Fe STEEL AFTER MODULATED CURRENT WELDING |
|
|
Nikonenko E.L., Smirnov A.N., Popova N.A., Ababkov N.V., Knyaz'kov K.V. |
| 1 - 20 of 20 Items |
|
