| Issue |
Title |
| Vol 21, No 3 (2019) |
THE INFLUENCE OF LASER TREATMENT OF POWDER STEEL PA-ZHGR ON THE GEOMETRIC PARAMETERS OF THE LASER EXPOSURE ZONE |
|
|
Usynin E.V., Oglezneva S.A., Morozov E.A. |
| Vol 21, No 4 (2019) |
THE INFLUENCE OF LASER EXPOSURE ON THE STATE OF HARDENED HIGH-SPEED STEEL Р6М5 |
|
|
Tokarev D.I., Drozdov A.A., Morozov E.A., Ablyaz T.R., Ivanova Y.S., Polezhaev I.S. |
| Vol 22, No 3 (2020) |
Investigation of the effect of granule crystallization rates on the strength characteristics of pressed semi-finished aluminum alloys of the Al-Cu-Mg system |
|
|
Zharov M.V. |
| Vol 18, No 4 (2016) |
Review of modern methods of management of the electron beam when the electron-beam welding |
|
|
Olshanskaya T.V., Salomatova E.S. |
| Vol 18, No 4 (2016) |
INFLUENCE OF SPEED OF COOLING ON FORMATION OF STRUCTURE OF A RAIL STEEL MICROALLOYED BY VANADIUM AND NIOBIUM |
|
|
Polevoy E.V., Dobuzhskaya A.B., Temlyantsev M.V. |
| Vol 20, No 4 (2018) |
Technological recommendations about laser heat threatmens of powder pseudo-alloy FeC1Cu15 |
|
|
Morozov E.A., Oglezneva S.A. |
| Vol 22, No 2 (2020) |
Simulation of the microstructure of aluminum bronze CuAlFe 9-4 providing increased resistance to wear |
|
|
Svyatkin A.V., Popova L.I., Shenderei P.E. |
| Vol 21, No 2 (2019) |
Influence of temperature and time of thermal processing on the structure of enamel coating |
|
|
Soshina T.O., Mukhamadyarova V.R. |
| Vol 22, No 3 (2020) |
About formation of defects in quartz glass granules based on tetraethoxysilane |
|
|
Vozyakov A.O., Porozova S.E. |
| Vol 19, No 3 (2017) |
TO THE PROBLEM OF CORROSION DESTRUCTION OF WELDED JOINTS |
|
|
Krivonosova E.A., Akulova S.N., Myshkina A.V. |
| Vol 18, No 1 (2016) |
THE INFLUENCE OF THE CONTINUOUS COOLING AND OF THE AUSTEMPERING ON A MICROSTRUCTURE AND OF MECHANICAL PROPERTIES IN STEELS 17Cr2Mn2Si2MoV AND 29Cr2Mn2Si2MoV |
|
|
Iurchenko A.N., Simonov I.N., Mikriukov M.I. |
| Vol 19, No 4 (2017) |
THE INFLUENCE OF PLASMA TREATMENT REGIMES ON THE DISTRIBUTION OF NONMETALLIC INCLUSIONS IN STEEL |
|
|
Myshkina A.V., Akulova S.N., Krivonosova E.A., Shchitsyn I.D., Sinani I.L. |
| Vol 16, No 1 (2014) |
SYNTHESIS AND PROPERTIES OF NANOPOWDER OF TITANIA FOR RECEIVING FUNCTIONAL MATERIALS |
|
|
Gurov A.A., Karmanov V.I., Porozova S.E., Shokov V.O. |
| Vol 19, No 4 (2017) |
STUDY OF THE PHASE COMPOSITION FORMING PROCESS OF THE COMPOSITE MATERIAL SiO2-ZrO2 |
|
|
Kolobova E.A., Porozova S.E., Vokhmyanin D.S. |
| Vol 21, No 2 (2019) |
DIMENSIONAL PARAMETERS OF THE TECHNOLOGICAL PROCESS OF OBTAINING CAST MOLDED CRYSTALLINE MATERIALS OF THE FLUORFLOGOPITA TYPE |
|
|
Ignatova A.M., Yudin M.V., Ignatov M.N. |
| Vol 18, No 3 (2016) |
MICROSTRUCTURAL FEATURES, MECHANICAL PROPERTIES AND HEAT TREATMENT OF BAINITIC STEEL |
|
|
Yurchenko A.N., Simonov Y.N. |
| 1 - 16 of 16 Items |
|
