Issue |
Title |
No 5 (2023) |
DEFORMATION OF A THIN FILM AFTER CONTACT LOSS WITH A CYLINDRICAL BASE AXIAL DELAMINATION |
|
Ustinov K.B., Gandilyan D.V. |
No 4 (2021) |
Investigation of the features of crystallization of granules of high-strength aluminum alloys of the Al-Zn-Mg-Cu system at ultra-high cooling rates |
|
Zharov M.V. |
No 4 (2016) |
Dispersive characteristics of flat longitudinal elastic waves extending in porous liquid-saturated medium with cavities |
|
Aizikovich S.M., Erofeev V.I., Leonteva A.V. |
No 1 (2023) |
DEPOSITION OF FULLERITES C60 ON A SOLID SUBSTRATE TO FORM A FILM |
|
Suvorov S.V., Vakhrushev A.V. |
No 2 (2014) |
Mechanical properties of technical plasticine under static and dynamic loadings |
|
Sapozhnikov S.B., Ignatova A.V. |
No 3 (2016) |
Structural geometrical transitions under dynamic loading of materials |
|
Savenkov G.G., Kuznetsov A.V., Bragov A.M., Konstantinov A.Y., Lomunov A.K. |
No 3 (2021) |
Crack growth in rotor P2M steel at elevated temperature |
|
Shlyannikov V.N., Kosov D.A., Fedorenkov D.I., Zhang X.C., Tu S.T. |
No 3 (2021) |
Simulation of impact failure of tubular samples made of composite material, depending on the loading rate |
|
Fedorenko A.N., Fedulov B.N., Lomakin E.V. |
No 3 (2017) |
The numerical model of dynamic mechanical behavior of brittle materials based on the concept of the kinetic theory of strength |
|
Grigoriev A.S., Shilko E.V., Skripnyak V.A., Chernyavsky A.G., Psakhie S.G. |
No 2 (2021) |
The Crack Growth in the Imitation Model of a GTE Turbine Disk under Operating Loading Conditions |
|
Yarullin R.R., Shlyannikov V.N., Sulamanidze A.G. |
No 2 (2018) |
Modelling of the amplitude of transverse vibrations of a homogeneous rod upon impact against a rigid obstacle taking into account its own weight |
|
Bityrin A.A. |
No 2 (2024) |
DEFORMATION OF A THIN FILM AFTER CONTACT LOSS WITH A CYLINDRICAL BASE, WITH ACCOUNTING FOR THE INFLUENCE OF ITS CURVATURE, COMPLIANCE, AND ACTION OF TRANSVERSE FORCES; DELAMINATION LOCATED IN THE CIRCUMFERENTIAL DIRECTION |
|
Gandilyan D.V. |
No 3 (2020) |
The effect of the angle of «meeting» of fullerite C60 with a solid substrate on the deposition process |
|
Suvorov S.V., Severiuchin A.V., Vakhrushev A.V. |
No 1 (2024) |
FLOW CURVES AND STRESS-STRAIN CURVES GENERATED BY A NONLINEAR MODEL FOR SHEAR FLOW OF THIXOTROPIC VISCOELASTIC MEDIA ACCOUNTING FOR STRUCTURE EVOLUTION |
|
Khokhlov A.V., Gulin V.V. |
No 4 (2019) |
Determination of the critical velocity of the fluid flowing in a single-walled carbon nanotubes embedded in a polymer matrix |
|
Lolov D.S., Lilkova-Markova S.V. |
No 1 (2024) |
MODELING OF HIGH-RATE HARDENING OF A POLYMER COMPOSITE MATERIAL UNDER LOADING ALONG THE REINFORCEMENT DIRECTION |
|
Fedulov B.N., Konstantinov A.Y., Fedorenko A.N., Sergeichev I.V. |
No 3 (2019) |
Simulation of the interaction fullerite C60 with the substrate solids |
|
Suvorov S.V., Severiuchin A.V., Vakhrushev A.V. |
No 1 (2024) |
ON IDENTIFICATION OF PARAMETERS OF A NONLINEAR CONSOLIDATION MODEL OF SANDY SOIL |
|
Artamonova N.B., Sheshenin S.V. |
No 4 (2018) |
Load interaction effects during near-threshold fatigue crack growth under variable amplitude: theory, model, experiment |
|
Savkin A.N., Sunder R., Denisevich D.S., Sedov A.A., Badikov K.A. |
No 4 (2018) |
Experimental Study of Short-Term Transient Creep of the Al/SiC Metal-Matrix Composite under Uniaxial Compression |
|
Smirnov S.V., Kryuchkov D.I., Nesterenko A.V., Berezin I.M., Vichuzhanin D.I. |
No 1 (2023) |
APPLICABILITY INDICATORS FOR THE NONLINEAR MAXWELL-TYPE ELASTO-VISCOPLASTIC MODEL WITH POWER MATERIAL FUNCTIONS AND TECHNIQUES TO CALIBRATE THEM |
|
Khokhlov А.V. |
No 1 (2013) |
Parameters of process of machining into account temperature models |
|
Kuznetsova E.V., Vavel A.Y. |
1 - 22 of 22 Items |
|