Issue	Title
No 4 (2020)	Study Smart-layer effect on the physical and mechanical characteristics of the samples from polymer composite materials under quasi-static loading	Abstract (Rus)
Shipunov G.S., Baranov M.A., Nikiforov A.S., Golovin D.V., Tihonova A.A.
No 1 (2014)	Experimental and theoretical investigations of visco-plastic deformation in structural steels considering mutual influence of plasticity and creep effects	Abstract
Volkov I.A., Volkov A.I., Kazakov D.A., Korotkikh Y.G., Tarasov I.S.
No 2 (2013)	Experimental study of limit stress-strain state quasi-brittle material using correlation techniques digital images	Abstract (Rus)
Tretyakova T.V., Spaskova E.M.
No 4 (2023)	APPLICATION OF THE FINITE ELEMENT METHOD IN COMBINATION WITH THE CONTACT LAYER METHOD TO DETERMINE THE STRESS-STRAIN STATE OF MULTILAYER BEAMS	Abstract (Rus)
Chepurnenko A.S., Turina V.S.
No 1 (2017)	Numerical and experimental study of composite bulkhead partition strength with in-situ x-ray monitoring	Abstract (Rus)
Potrahov N.N., Anoshkin A.N., Zuiko V.Y., Osokin V.M., Pisarev P.V., Pelenev K.A.
No 3 (2014)	MIXED-MODE LOADING OF THE CRACKED PLATE UNDER PLANE STRESS CONDITIONS	Abstract (Rus)
Stepanova L.V., Yakovleva E.M.
No 2 (2018)	Analysis of stress-strain state of dental implants by the boundary integral equations method	Abstract (Rus)
Perelmuter M.N.
No 2 (2014)	Features of low-temperature deformation and fracture of combined plastic pipes	Abstract (Rus)
Anoshkin A.N., Pospelov A.B., Iakushev R.M.
No 2 (2023)	METHOD FOR STUDYING THE POROSITY OF FLUID PHASE SAMPLES BY X-RAY COMPUTED TOMOGRAPHY UNDER UNIAXIAL COMPRESSION	Abstract (Rus)
Akifyev K.N., Statsenko E.O., Smirnova V.V., Kharin N.V., Bolshakov P.V., Sachenkov O.A.
No 2 (2018)	Stability of orthotropic doubly curved shallow shells with a movable hinged fixing of the border	Abstract (Rus)
Kamenev I.V., Semenov A.A.
No 4 (2020)	Estimating of mechanical stresses, plastic deformations and damage by means of acoustic anisotropy	Abstract (Rus)
Belyaev A.K., Polyanskiy V.A., Tretyakov D.A.
No 4 (2015)	Stress-strain analysis and strength prediction of composite outlet guide vane for aircraft jet engine	Abstract (Rus)
Grinev M.A., Anoshkin A.N., Pisarev P.V., Zuiko V.Y., Shipunov G.S.
No 4 (2019)	Experimental and theoretical study of mechanical deformation of freezing saturated soil	Abstract (Rus)
Zhelnin M.S., Prokhorov A.E., Kostina A.A., Plekhov O.A.
No 3 (2015)	CAD/CAE modelling of mechanical behavior of composite outlet guide vane for aircraft jet engine	Abstract (Rus)
Grinev M.A., Anoshkin A.N., Pisarev P.V., Zuiko V.Y., Shipunov G.S.
No 3 (2022)	Development of the digital image correlation (DIC) method for mechanical testing at elevated temperatures	Abstract (Rus)
Strungar E.M., Lobanov D.S.
No 4 (2018)	Influence of the biaxial loading regimes on fatigue life of 2024 aluminum alloy and 40CrMnMo steel	Abstract (Rus)
Wildemann V.E., Tretyakov M.P., Staroverov O.A., Yankin A.S.
No 4 (2015)	Formation of divergent testing efforts and experimental evaluation of material strength under biaxial stretching	Abstract (Rus)
Zenkov E.V., Tsvik L.B.
No 4 (2018)	Numerical simulation for development of methodology of stress-strain state control of composite bulkhead for aviation application with the usage of FBG sensors	Abstract (Rus)
Anoshkin A.N., Zuiko V.Y., Pelenev K.A., Pisarev P.V., Shipunov G.S.
No 3 (2016)	Evaluation of service life of heat-resistant alloys under cyclic thermomechanical loading	Abstract (Rus)
Volkov I.A., Igumnov L.A.
No 3 (2018)	The density of deformation distribution in a plane of VT1-00 sample under uniaxial strain	Abstract (Rus)
Rekov A.M., Vichuzhanin D.I.
No 1 (2016)	DETERMINATION OF MECHANICAL CHARACTERISTICS OF TRANSVERSELY ISOTROPIC FIBER COIL ACCORDING TO ISOTROPIC PROPERTIES OF ITS COMPONENTS	Abstract (Rus)
Gasparyan A.G., Esipenko I.A.
No 2 (2022)	Energy conditions for the formation of magnesium hydride	Abstract (Rus)
Aptukov V.N., Skryabina N.E., Fruchart D.
No 3 (2018)	FEATURES OF STRESS-STRAIN STATE OF THIN-WALLED CIRCULAR SINGLE-EDGE-NOTCH SPECIMEN UNDER ECCENTRIC TENSION	Abstract (Rus)
Konovalov A.V., Kozlov A.V., Konovalov D.A., Partin A.S.
No 3 (2016)	A numerical study of stress-strain state evolution in structurally inhomogeneous materials subjected to uniaxial loading	Abstract (Rus)
Smirnov S.V., Konovalov A.V., Myasnikova M.V., Khalevitsky Y.V., Smirnov A.S.
No 1 (2022)	Calculation of VAT and assessment of the strength of a segmented cylindrical shell made of composite materials with metal inserts	Abstract (Rus)
Rogozhnikova E.N., Anoshkin A.N., Bulbovich R.V.
No 1 (2019)	A System Development for Monitoring Kinetic Parameters of a Phase Transition in a Fluid-Saturated Soil Based on Fiber Optic Sensors	Abstract (Rus)
Prokhorov A.E., Plekhov O.A.
No 2 (2016)	Manufacturing defects in composite flanges: modelling and analysis of influence on static strength	Abstract (Rus)
Anoshkin A.N., Zuiko V.Y., Osokin V.M., Tretyakov A.A., Pisarev P.V.
No 1 (2022)	Numerical simulation of brush seal tests	Abstract (Rus)
Bondar V.S., Rodin E.V.
No 6 (2023)	SIMULATING THE STRESS-STRAIN STATE DURING LASER METAL DEPOSITION TO DETERMINE THE FINAL WARPING OF PRODUCTS	Abstract (Rus)
Smetannikov O.Y., Bekmansurov M.R., Ilinykh G.V., Dongauzer K.A.
No 4 (2016)	Anisotropy of material fatigue properties and its effect on durability of structural elements	Abstract (Rus)
Burago N.G., Nikitin I.S., Yushkovsky P.A., Yakushev V.L.
No 4 (2021)	© ПНИПУ Numerical and experimental research of the evaluation of the mechanical behavior of carbon fiber reinforced polymerspecimens with an embedded Smart-layer	Abstract (Rus)
Baranov M.A., Nikiforov A.S., Mikryukov A.O., Ermakov D.A.
1 - 31 of 31 Items

Search tips:

• Search terms are case-insensitive
• Common words are ignored
• By default only articles containing all terms in the query are returned (i.e., AND is implied)
• Combine multiple words with OR to find articles containing either term; e.g., education OR research
• Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
• Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
• Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
• Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"