| Issue |
Title |
| Vol 20, No 4 (2018) |
Technological recommendations about laser heat threatmens of powder pseudo-alloy FeC1Cu15 |
|
|
Morozov E.A., Oglezneva S.A. |
| Vol 18, No 4 (2016) |
THE INFLUENCE OF HEAT TREATMENT ON QUALITY OF WELDED JOINTS IN THE SECOND STAGE OF UNITS IN THE ROLLING SHOP NO. 11 OJSC “Magnitogorsk Iron and Steel Works” |
|
|
Lazareva A.I., Kopceva N.V., Gorlenko D.A., Efimova J.J., Nikitenko O.A., Golubchik E.M. |
| Vol 21, No 3 (2019) |
THE INFLUENCE OF LASER TREATMENT OF POWDER STEEL PA-ZHGR ON THE GEOMETRIC PARAMETERS OF THE LASER EXPOSURE ZONE |
|
|
Usynin E.V., Oglezneva S.A., Morozov E.A. |
| Vol 21, No 4 (2019) |
THE INFLUENCE OF LASER EXPOSURE ON THE STATE OF HARDENED HIGH-SPEED STEEL Р6М5 |
|
|
Tokarev D.I., Drozdov A.A., Morozov E.A., Ablyaz T.R., Ivanova Y.S., Polezhaev I.S. |
| Vol 19, No 3 (2017) |
On the connection between the energy parameters of secondary emission signals from the laser beam welding zone in vacuum with the parameters of metal penetration |
|
|
Letyagin I.Y., Belenkiy V.Y., Trushnikov D.N. |
| Vol 20, No 3 (2018) |
Investigation of secondary emission signals from the impact zone of the laser beam during laser beam welding in vacuum |
|
|
Letyagin I.Y., Trushnikov D.N., Belenkii V.Y., Pang S., Lyamin Y.V. |
| Vol 18, No 1 (2016) |
Application of selective laser melting to produce low modulus alloys of the titanium-niobium |
|
|
Babakova E.V., Khimich M.A., Saprykin A.A., Ibragimov E.A. |
| Vol 23, No 1 (2021) |
Investigation of parameters of plasma formed in the zone of laser welding in vacuum |
|
|
Letyagin I.Y., Felikan K.V., Belenkiy V.Y., Erikov A.P. |
| Vol 23, No 2 (2021) |
Possibilities of additive technologies application in designing and manufacturing of weapons of military equipment |
|
|
Voynov P.S., Belenkiy V.Y., Belinin D.S., Varushkin S.V. |
| Vol 20, No 2 (2018) |
REDUCTION OF THE DEFECTS OF HEAT-RESISTANT NICKELS ALLOYS IN SURFACING TECHNOLOGIES |
|
|
Krivonosova E.A., Shchitsyn I.D., Akulova S.N., Myshkina A.V., Neulybin S.D., Belinin D.S. |
| Vol 24, No 1 (2022) |
INVESTIGATION OF THE STRUCTURE AND DEFECTIVENESS OF TITANIUM ALLOYS DURING SURFACING |
|
|
Homutinin I.S., Akulova S.N., Myshkina A.V., Krivonosova E.A., Lyamin Y.V. |
| Vol 20, No 4 (2018) |
Research of the effect of rare-earth elements on ceramic materials based on ZrB2 - SiC (20 vol. %), obtained by spark plasma sinter |
|
|
Kulmetyeva V.B., Porozova S.E., Chuvashov V.E., Yaburov M.P. |
| Vol 16, No 4 (2014) |
Laser welding in a vacuum - Promising welding manufacturing techniques for critical applications |
|
|
Belenky V.Y., Trushnikov D.N., Fedoseyeva E.M., Letyagin I.Y., Mladenov G., Koleva E. |
| Vol 17, No 1 (2015) |
INITIAL STAGE OF NUCLEATING CENTRE FORMATION BY PULSE METHASTRUCTURE MODIFYING OF THE METALS SURFACE |
|
|
Postnikov V.S. |
| Vol 20, No 4 (2018) |
Features of Formation of Gradient Porous and Compact Porous Powder Structures by Selective Laser Sintering of Titanium Grade VT1-0 Spherical Powder |
|
|
Minko D.V. |
| Vol 21, No 2 (2019) |
STUDY OF CHARACTERISTICS OF MECHANICAL PROPERTIES OF SAMPLES FROM THE PH1 ALLOY OBTAINED BY SELECTIVE LASER SINTERING METHOD |
|
|
Babentsova L.P., Antsiferova I.V. |
| Vol 18, No 1 (2016) |
Assessment of through pro-melting at laser welding on the basis of registration of a plasma torch |
|
|
Letiagin I.I., Fedoseeva E.M. |
| Vol 18, No 1 (2016) |
Structure and phase composition of Ti-Nb alloy produced by the method of selective laser melting |
|
|
Kovalevskaia Z.G., Khimich M.A., Sharkeev I.P., Babakova E.V. |
| Vol 18, No 1 (2016) |
A systematic approach to the analysis of management methods accuracy precision machining considering the dominant role of morphogenetic movements |
|
|
Samoilova E.M., Kolokolova S.S., Vinogradov M.V. |
| Vol 22, No 3 (2020) |
Application of the normalized diagram to simulate additive surfacing using energy beam sources |
|
|
Letyagin I.Y., Trushnikov D.N., Belenkiy V.Y., Erikov A.P., Olshanskaya T.V. |
| 1 - 20 of 20 Items |
|
