Issue |
Title |
Vol 18, No 3 (2016) |
Structure and properties of Ni47Mn42In11 alloy AFTER THERMOCYCLIC TREATMENT |
|
Kaletina Y.V., Efimova E.D., Gerasimov E.G., Kaletin A.Y., Fokina E.A. |
Vol 19, No 1 (2017) |
CHANGE THE MICROSTRUCTURE OF SPARINGLY ALLOYED STEEL DEPENDING ON THE SPEED OF CONTINUOUS COOLING AND TEMPERATURE OF ISOTHERMAL HOLDING |
|
Iurchenko A.N., Panov D.O., Simonov I.N. |
Vol 23, No 3 (2021) |
RESEARCH OF STRUCTURE AND PROPERTIES OF STEEL 25MN2SI |
|
Olshanskaya T.V., Fedoseeva E.M. |
Vol 16, No 1 (2014) |
Structure and mechanical properties formation of the hot-forged low-carbon martensitic steel |
|
Romanov I.D., Shatsov A.A., Zakirova M.G. |
Vol 19, No 3 (2017) |
INVESTIGATION OF PHYSICAL MECHANICAL PROPERTIES AND TEMPERATURES OF PHASE TRANSFORMATIONS OF POWDER FE-Ni ALLOYS |
|
Oglezneva S.A., Saenkov K.L., Grevnov L.M. |
Vol 18, No 1 (2016) |
THE INFLUENCE OF THE CONTINUOUS COOLING AND OF THE AUSTEMPERING ON A MICROSTRUCTURE AND OF MECHANICAL PROPERTIES IN STEELS 17Cr2Mn2Si2MoV AND 29Cr2Mn2Si2MoV |
|
Iurchenko A.N., Simonov I.N., Mikriukov M.I. |
Vol 20, No 2 (2018) |
INFLUENCE OF THE DEFORMATION ON STRUCTURE AND PROPERTIES OF HEUSLER ALLOY Ni47Mn42In11 |
|
Kaletina Y.V., Greshnova E.D., Kaletin A.Y., Pilyugin V.P. |
Vol 18, No 2 (2016) |
INVESTIGATION OF THE EFFECT OF GRAIN SIZE AUSTENITE ON PHASE TRANSFORMATION TEMPERATURE IRON-BASED ALLOYS |
|
Oglezneva S.A., Saenkov K.L. |
Vol 21, No 1 (2019) |
Development of technology and flux-cored wire for arc welding of high-strength alloy steels |
|
Shalimov M.P., Berezovsky A.V., Smolentsev A.S. |
Vol 18, No 2 (2016) |
WEAR RESISTANCE OF ARC SPRAYED COATINGS TYPE OF Fe-C-Cr-Ti-Al AFTER PLASMA REMELTING |
|
Verkhorubov V.S., Nevezhin S.V., Korobov I.S., Neulybin S.D., Terent’ev S.A., Shchitsyn I.D. |
Vol 21, No 3 (2019) |
DETERMINATION OF CRITICAL TEMPERATURES AC1 AND AC3 IN STEELS ALLOYING SYSTEM H2G2S2MF USING THE DILATOMETRIC METHOD AND THE METHOD OF TESTING QUENCHING |
|
Iurchenko A.N., Marieva M.A., Grebenkin R.D., Simonov I.N. |
Vol 18, No 2 (2016) |
MECHANICAL AND STRUCTURAL MICROINHOMOGENEITY OF WELDED COMPOUNDS OF X65 STEEL |
|
Fedoseeva E.M. |
Vol 21, No 3 (2019) |
MICROSTRUCTURE and PROPERTIES of ALLOYS with SHAPE MEMORY EFFECTS BASED on NI-Mn INTERMETALLIDE DOPED with Ti, Al, Ga and Fe |
|
Belosludtseva E.S., Pushin A.V., Svirid A.E., Pushin V.G., Tolmachev T.P. |
Vol 18, No 2 (2016) |
The using of quasi-static magnetic hysteresis loops to control steel structures |
|
Novikov V.F., Neradovskii D.F., Sokolov R.A. |
Vol 21, No 4 (2019) |
THE INFLUENCE OF LASER EXPOSURE ON THE STATE OF HARDENED HIGH-SPEED STEEL Р6М5 |
|
Tokarev D.I., Drozdov A.A., Morozov E.A., Ablyaz T.R., Ivanova Y.S., Polezhaev I.S. |
Vol 18, No 3 (2016) |
Structure and mechanical properties of low-carbon martensitic steels hardened from a temperature the critical interval and after isothermal tempering |
|
Berezin S.K. |
Vol 21, No 4 (2019) |
THE INFLUENCE OF DEFORMATION STABILITY OF β-PHASE IN TITANIUM ALLOY BT23 ON THE PHASE COMPOSITION, MICROSTRUCTURE AND MECHANICAL PROPERTIES AFTER TENSION TEST AND IMPACT TEST |
|
Gladkovsky S.V., Veselova V.E., Patselov A.M., Khotinov V.A. |
Vol 18, No 3 (2016) |
MICROSTRUCTURAL FEATURES, MECHANICAL PROPERTIES AND HEAT TREATMENT OF BAINITIC STEEL |
|
Yurchenko A.N., Simonov Y.N. |
Vol 22, No 1 (2020) |
Study of the transformation of supercooled austenite of steel using high-resolution dilatometry |
|
Panov D.O., Spivak L.V. |
Vol 18, No 3 (2016) |
PROCESS ELECTRIC-SPARK CARBURIZING IN AN ULTRASONIC FIELD |
|
Shevchenko O.I., Trekin G.E. |
Vol 22, No 2 (2020) |
Calculation of TTT diagrams of isothermal austenite decomposition in structural steels |
|
Okishev K.Y. |
Vol 23, No 3 (2021) |
INTENSIVE PLASTIC DEFORMATION of NON-STOCHIOMETRIC Ni-Mn-In HEUSLER ALLOY |
|
Kaletina Y.V., Kaletin A.Y., Pilyugin V.P. |
Vol 16, No 1 (2014) |
INFLUENCE of nonmetallicS and structural constituents on impact strength of LOW-ALLOYED steel |
|
Krivonosova E.A., Olshanskaya T.V., Lodyagina T.V., Burtseva O.A. |
1 - 23 of 23 Items |
|