| Issue |
Title |
| Vol 18, No 3 (2016) |
Special features of the fracture surface of structural steel 09G2S after cold radial forging |
|
|
Shaimanov G.S., Simonov M.Y., Simonov Y.N., Pertsev A.S. |
| Vol 24, No 1 (2022) |
MODELING THE ENERGY INTENSITY OF PLASTIC DEFORMATION OF THE CUTTING SURFACES OF THE CUTTING WHEEL DURING ABRASIVE CUTTING OF PIPES |
|
|
Levchenko E.A. |
| Vol 18, No 3 (2016) |
Microstructure and dynamic loading resistance of layered steel/Al-composite produced by rolling |
|
|
Gladkovsky S.V., Kuteneva S.V., Veselova V.E., Kokovikhin E.A. |
| Vol 18, No 4 (2016) |
INFLUENCE OF TEMPERING ON THE PROPERTIES OF CARBIDE-FREE-BAINITE STEELS |
|
|
Kaletin A.Y., Kaletina Y.V., Simonov Y.N. |
| Vol 16, No 1 (2014) |
INFLUENCE of nonmetallicS and structural constituents on impact strength of LOW-ALLOYED steel |
|
|
Krivonosova E.A., Olshanskaya T.V., Lodyagina T.V., Burtseva O.A. |
| Vol 19, No 2 (2017) |
Qualimetric estimation of designing efficiency for metal cutting plasmatrons |
|
|
Anakhov S.V., Pyckin Y.A., Matushkin A.V. |
| Vol 16, No 3 (2014) |
METHODS OF INFLUENCE ON OXIDE’S AND SULPHIDE’S CHARACTERISTICS IN WELD JOINTS OF LOW-ALLOYED STEEL |
|
|
Krivonosova E.A., Lodyagina T.V. |
| Vol 19, No 4 (2017) |
THE STUDY OF TRANSFORMATIONS, STRUCTURE AND PROPERTIES OF INDUSTRIAL SMELTING SYSTEM-ALLOYED LOW-CARBON STEEL 12Kh3G2МFS |
|
|
Poduzov D.P., Simonov M.Y., Yurchenko A.N., Simonov Y.N., Bukhalov A.D. |
| Vol 16, No 4 (2014) |
THE POSSIBILITY OF MULTILAYER METALLIC MATERIALS FOR THE MANUFACTURE OF HIGH PRESSURE CYLINDERS |
|
|
Plokhikh A.I. |
| Vol 20, No 2 (2018) |
Influence of the thermal mode at joint arc and aluminothermic impact on formation of structure and properties of built-up metal |
|
|
Abashkin E.E., Zhilin S.G., Komarov O.N., Tkacheva A.V. |
| Vol 16, No 4 (2014) |
NCREASE IN IMPACT STRENGTH OF STRUCTURAL STEELS BY THE CARBIDE-FREE-BAINITE FORMATION |
|
|
Kaletin A.Y., Kaletina Y.V. |
| Vol 20, No 4 (2018) |
EVALUATION OF THE POSSIBILITY OF IMPROVING SHOCK-ABRASIVE PERFORMANCE OF COMPOSITE MATERIALS AT THE ACCOUNT OF OPTIMIZATION OF THEIR ELASTIC-DISSIPATIVE PROPERTIES |
|
|
Sirotin P.V., Gasanov B.G., Ismailov M.A. |
| Vol 17, No 1 (2015) |
EFFECT ALUMINIUM ELECTRO-SPARK TECHNOLOGICAL DEPOSIT AND TEMPERINGS TEMPERATURE ON MICROSTRUCTURE AND PROPERTIES LOW-CARBON, LOW-ALLOYED WELD |
|
|
Trekin G.E., Shevchenko O.I. |
| Vol 21, No 3 (2019) |
THERMAL TREATMENT OF GRINDING BALLS AT NEW BALL-ROLLING SHOP |
|
|
Shevchenko O.I., Trekin G.E., Rubtsov V.Y., Kurochkin V.V. |
| Vol 17, No 3 (2015) |
PHASE TRANSFORMATIONS AND FRACTURE MECHANISM OF SYNTHETIC MINERAL SUCH BASALT ALLOYS UNDER ACTION OF METAL IMPACTOR |
|
|
Ignatova A.M., Nikhamkin M.A., Voronov L.V., Ignatov M.N. |
| Vol 21, No 4 (2019) |
THE INFLUENCE OF DEFORMATION STABILITY OF β-PHASE IN TITANIUM ALLOY BT23 ON THE PHASE COMPOSITION, MICROSTRUCTURE AND MECHANICAL PROPERTIES AFTER TENSION TEST AND IMPACT TEST |
|
|
Gladkovsky S.V., Veselova V.E., Patselov A.M., Khotinov V.A. |
| Vol 17, No 4 (2015) |
INFLUENCE OF STRUCTURE AND NONMETALLIC INCLUSIONS ON PROPERTIES OF WELDED SEAMS FROM X65 STEEL |
|
|
Fedoseeva E.M. |
| Vol 23, No 1 (2021) |
Structure of joints of medium-carbon steel after friction welding and surfacing |
|
|
Laptev S.K., Shatsov A.A., Grebenkov S.K. |
| Vol 18, No 1 (2016) |
FEATURES OF DESTRUCTION OF METAL TARGET AND NON-METAL PUNCHER IN HIGH SPEED CONNECTIVITY |
|
|
Ignatova A.M., Nikhamkin M.S., Voronov L.V., Ignatov M.N. |
| Vol 23, No 4 (2021) |
INFLUENCE OF HEAT TREATMENT MODES ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE METASTABLE TITANIUM ALLOY VT23 |
|
|
Veselova V.E., Gladkovsky S.V., Kovalev N.I. |
| 1 - 20 of 20 Items |
|
