Issue	Title
No 4 (2017)	Theoretical and experimental study of structural elements’ influence of fiber-optic strain sensor on its readings and correction procedure for transfer function	Abstract (Rus)
Sozonov N.S., Shardakov I.N.
No 4 (2023)	INVESTIGATION OF THE STABILITY OF FBG SENSOR MEASUREMENTS UNDER VARIOUS CLIMATIC CONDITIONS	Abstract (Rus)
Serovaev G.S., Kosheleva N.A.
No 4 (2021)	Anti-icing indicator polymer coating with built-in fiber-optic PEL-sensor for indication, location and de-icing of aerodynamic surfaces	Abstract (Rus)
Pan’kov A.A., Pisarev P.V.
No 4 (2016)	Mathematical modeling of piezo-electro-luminescent effect and diagnostics of pressure distribution along fiber optic sensor	Abstract (Rus)
Pan’kov A.A.
No 3 (2021)	Algorithm for topology optimization of a structure made of anisotropic material with consideration of the reinforcement orientation parameters	Abstract (Rus)
Fedulov B.N., Fedorenko A.N., Antonov F.K., Lomakin E.V.
No 1 (2016)	DETERMINATION OF MECHANICAL CHARACTERISTICS OF TRANSVERSELY ISOTROPIC FIBER COIL ACCORDING TO ISOTROPIC PROPERTIES OF ITS COMPONENTS	Abstract (Rus)
Gasparyan A.G., Esipenko I.A.
No 3 (2021)	Frequency characteristics of built-in fiber-optic PEL-sensor to diagnose complex harmonic deformations within the polymer composite structure	Abstract (Rus)
Pan’kov A.A., Pisarev P.V.
No 3 (2017)	ANSYS numerical modeling of electroelastic fields in the piezoelectro luminescent fiber-optical sensor diagnosing the composite volume deformed state	Abstract (Rus)
Pan’kov A.A., Pisarev P.V.
No 3 (2021)	Simulation of impact failure of tubular samples made of composite material, depending on the loading rate	Abstract (Rus)
Fedorenko A.N., Fedulov B.N., Lomakin E.V.
No 6 (2023)	REFINED MODEL OF THERMOELASTIC-PLASTIC DYNAMIC DEFORMATION OF FLEXIBLE REINFORCED CYLINDRICAL SHELLS	Abstract (Rus)
Yankovskii A.P.
No 4 (2020)	On the specifics of behavior of the sandwich plate composite facing layers under local loading	Abstract (Rus)
Paimushin V.N., Kayumov R.A., Shakirzyanov F.R., Kholmogorov S.A.
No 1 (2018)	Mathematical model of pulse scanning of pressure along a piezo-electro-luminescent fiber-optical sensor	Abstract (Rus)
Pan’kov A.A.
No 3 (2020)	Diagnostics of impregnation defects of reinforcing filaments of polymer composite with built-in fibre-optic sensor with distributed Bragg grating	Abstract (Rus)
Pan’kov A.A.
No 2 (2018)	Resonant diagnostics of temperature distribution by the piezo-electro-luminescent fiber-optical sensor according to the solution of the Fredholm integral equation	Abstract (Rus)
Pan’kov A.A.
No 4 (2023)	BUILT-IN FIBER-OPTIC MECHANOPHOTOLUMINESCENT SENSOR OF COMPLEX DEFORMED STATE FOR MONITORING VIBRATIONS OF POLYMER COMPOSITE STRUCTURES	Abstract (Rus)
Pan’kov A.A.
No 2 (2020)	Numerical Modeling of Electroelastic Fields in the Surface Piezoelectric Luminescent Optical Fiber Sensor to Diagnose Deformation of Composite Plates	Abstract (Rus)
Pan’kov A.A., Pisarev P.V.
No 3 (2023)	REGULARITIES OF FATIGUE FAILURE TYPICAL COMPOSITE FLANGE	Abstract (Rus)
Solomonov D.G., Sazhenkov N.A., Konev I.P., Toropicina A.V., Nikhamkin M.S.
No 1 (2019)	A System Development for Monitoring Kinetic Parameters of a Phase Transition in a Fluid-Saturated Soil Based on Fiber Optic Sensors	Abstract (Rus)
Prokhorov A.E., Plekhov O.A.
No 1 (2023)	REPRESENTATIVE VOLUME AND EFFECTIVE MATERIAL CHARACTERISTICS OF PERIODIC AND STATISTICALLY UNIFORMLY REINFORCED FIBER COMPOSITES	Abstract (Rus)
Pestrenin V.M., Pestrenina I.V., Landik L.V., Fagalov A.R., Pelevin A.G.
No 1 (2013)	Evolution of technological stress fields in cylindrical stress applying rod for optical fiber Panda-type during annealing	Abstract (Rus)
Trufanov A.N.
No 3 (2022)	Effect of mechanical load on resultant composite piezomodules	Abstract (Rus)
Pan’kov A.A.
No 1 (2013)	The use of optimization techniques for numerical analysis of temperature fields in the quartz optical fiber billet	Abstract (Rus)
Boyarshinova I.N.
No 4 (2021)	© ПНИПУ Numerical and experimental research of the evaluation of the mechanical behavior of carbon fiber reinforced polymerspecimens with an embedded Smart-layer	Abstract (Rus)
Baranov M.A., Nikiforov A.S., Mikryukov A.O., Ermakov D.A.
No 2 (2013)	Residual stresses in preform of stress applying part for Panda type optical fiber with considering of technological imperfections of doping	Abstract (Rus)
Semenov N.V., Trufanov A.N., Trufanov N.A.
1 - 24 of 24 Items

Search tips:

• Search terms are case-insensitive
• Common words are ignored
• By default only articles containing all terms in the query are returned (i.e., AND is implied)
• Combine multiple words with OR to find articles containing either term; e.g., education OR research
• Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
• Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
• Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
• Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"