| Issue |
Title |
| Vol 21, No 4 (2019) |
INFLUENCE OF HEATING TEMPERATURE AND HOLDING TIME ON THE GRAIN SIZE IN MEDIUM-CARBON STRUCTURAL STEELS 29H2G2S2MF AND 44H2G2S2MF |
|
|
Iurchenko A.N., Grebenkin R.D., Menlysheva N.S., Simonov I.N. |
| Vol 19, No 1 (2017) |
Calculation of characteristics of metal materials with AMD-methods |
|
|
Kustov A.I., Miguel I.A. |
| Vol 23, No 4 (2021) |
FORMATION OF GRADIENT STRUCTURE IN VT1-0 ALLOY UNDER THE INFLUENCE OF IMPLANTATION |
|
|
Nikonenko A.V., Popova N.A., Nikonenko E.L., Kalashnikov M.P., Kurzina I.A. |
| Vol 18, No 1 (2016) |
Production of ultra high temperature ceramic materials via sintering of compositions based on zirconium and hafnium borides |
|
|
Lyamin I.B., Poilov V.Z., Priamilova E.N., Zhakova O.V. |
| Vol 19, No 3 (2017) |
INVESTIGATION OF PHYSICAL MECHANICAL PROPERTIES AND TEMPERATURES OF PHASE TRANSFORMATIONS OF POWDER FE-Ni ALLOYS |
|
|
Oglezneva S.A., Saenkov K.L., Grevnov L.M. |
| Vol 18, No 1 (2016) |
Structure and phase composition of Ti-Nb alloy produced by the method of selective laser melting |
|
|
Kovalevskaia Z.G., Khimich M.A., Sharkeev I.P., Babakova E.V. |
| Vol 20, No 2 (2018) |
INFLUENCE OF THE DEFORMATION ON STRUCTURE AND PROPERTIES OF HEUSLER ALLOY Ni47Mn42In11 |
|
|
Kaletina Y.V., Greshnova E.D., Kaletin A.Y., Pilyugin V.P. |
| Vol 18, No 2 (2016) |
INVESTIGATION OF THE EFFECT OF GRAIN SIZE AUSTENITE ON PHASE TRANSFORMATION TEMPERATURE IRON-BASED ALLOYS |
|
|
Oglezneva S.A., Saenkov K.L. |
| Vol 21, No 2 (2019) |
INFLUENCE OF ULTRASOUND IMPACT IN THE PROCESS OF THE STACKING CYCLE, ON THE PROPERTIES AND STRUCTURE OF THE SURFACED METAL FROM 12Cr18Ni10Ti STEEL |
|
|
Shitsyn Y.D., Neulybin S.D., Belinin D.S., Nikulin R.G., Karunakaran K.P. |
| Vol 18, No 2 (2016) |
RESEARCH LAPPING PROCESS OF THE MINERAL CERAMICS |
|
|
Muratov K.R., Gashev E.A., Lagunov D.M., Matygullina E.V. |
| Vol 21, No 3 (2019) |
THE INFLUENCE OF PLASMA ELECTROLYTIC CARBONITRIDING ON PHASE COMPOSITION OF Cr-Ni-Al ALLOY |
|
|
Popova N.A., Nikonenko E.L., Erbolatova G.U., Nikonenko A.V. |
| Vol 18, No 2 (2016) |
Method of determination of durability of a portion of ferromagnetic abrasive filler in magnetic abrasive polishing |
|
|
Kungurov D.A. |
| Vol 18, No 2 (2016) |
The methods of influence on the structure and properties of aluminum alloys used in the aerospace industry |
|
|
Dolgopolov V.G., Dubrovskii V.A., Simonov M.I., Simonov I.N., Iurchenko A.N., Shibanova K.A. |
| Vol 21, No 4 (2019) |
STRUCTURAL-PHASE STATE OF UFG TITANIUM IMPLANTED WITH ALUMINUM IONS |
|
|
Nikonenko A.V., Popova N.A., Nikonenko E.L., Kalashnikov M.P., Oks E.M., Kurzina I.A. |
| Vol 18, No 3 (2016) |
Special features of the fracture surface of structural steel 09G2S after cold radial forging |
|
|
Shaimanov G.S., Simonov M.Y., Simonov Y.N., Pertsev A.S. |
| Vol 22, No 2 (2020) |
The use of a metal insert in the core to control the solidification speed of the casting |
|
|
Sharov K.V., Bogomyagkov A.V., Pustovalov D.O., Shumkov A.A., Merkusheva L.M., Nikitin N.E. |
| Vol 18, No 3 (2016) |
Structure and properties of Ni47Mn42In11 alloy AFTER THERMOCYCLIC TREATMENT |
|
|
Kaletina Y.V., Efimova E.D., Gerasimov E.G., Kaletin A.Y., Fokina E.A. |
| Vol 22, No 3 (2020) |
Process performance when machining part edges with polymer-abrasive brushes |
|
|
Dimov Y.V., Podashev D.B. |
| Vol 16, No 4 (2014) |
FORMATION OF MICROSTRUCTURE AND PROPERTIES OF THE COMPOSITION "HARDFACING LAYER-BASE METAL" IN THE ULTRASONIC WAVE |
|
|
Shevchenko O.I., Trekin G.E. |
| Vol 18, No 4 (2016) |
Hypotheses justifies the increase in the durability of DIAMOND-abrasive tool |
|
|
Dudarev A.S., Zakharova S.P. |
| Vol 23, No 3 (2021) |
Phase transitions of the dislocation structure in polycrystalline copper-based alloys |
|
|
Trishkina L.I., Cherkasova T.V., Solov’ev A.N., Cherkasov N.V. |
| Vol 17, No 2 (2015) |
Austenite grain growth during heating type steel H3G3MFS And HN3MFS |
|
|
Abrosimova A.A., Panov D.O., Simonov Y.N. |
| Vol 19, No 1 (2017) |
EQUIPMENT ANALYSIS FOR FINISHING ABRASIVE PROCESSING OF FLAT PRECISION SURFACES OF PRODUCTS |
|
|
Makarov V.F., Muratov K.R. |
| Vol 23, No 4 (2021) |
INFLUENCE OF EQUAL-CHANNEL ANGULAR PRESSING ON THE STRUCTURAL-PHASE STATE OF TECHNICALLY PURE NICKEL |
|
|
Popova N.A., Nikonenko E.L., Solov’eva Y.V., Starenchenko V.A. |
| Vol 17, No 4 (2015) |
Calculation method of the diamond tool deterioration at discrete grinding wheels ruling |
|
|
Morozov A.V. |
| 1 - 25 of 25 Items |
|
