Issue	Title
No 2 (2023)	PECULIARITIES OF SH WAVE PROPAGATION IN A TWO-LAYER STRUCTURE OF INHOMOGENEOUS PIEZOELECTRIC AND DIELECTRIC LAYERS	Abstract (Rus)
Belyankova T.I., Vorovich E.I., Kalinchuk V.V.
No 2 (2013)	About elastic and strength limits of rocks	Abstract (Rus)
Rychkov B.A., Komartsov N.M., Luzhanskaya T.A.
No 3 (2013)	TERMOUPRUGOST' MIKROPOLYaRNYKh ORTOTROPNYKh TONKIKh OBOLOChEK	Abstract (Rus)
Sargsyan S.H., Farmanyan A.J.
No 4 (2023)	MODELING OF AXIAL COMPRESSION OF V95/10% SIC ALUMINUM MATRIX COMPOSITE UNDER NON-STATIONARY THERMOMECHANICAL CONDITIONS	Abstract (Rus)
Kryuchkov D.I., Nesterenko A.V., Zalazinsky A.G.
No 1 (2018)	Applied grinding model of a solid particle with a simple shape on impact with a hard surface	Abstract (Rus)
Guryanov G.A., Abdeev B.M., Klimenko Y.A.
No 3 (2020)	Structural failure criterion for spatially-reinforced carbon-carbon composite materials	Abstract (Rus)
Magnitsky I.V.
No 4 (2014)	Coupled model of fluid-saturated porous materials based on a combination of discrete and continuum approaches	Abstract (Rus)
Dimaki A.V., Shilko E.V., Astafurov S.V., Korostelev S.Y., Psakhie S.G.
No 1 (2020)	The Applied model of grinding a spherical solid particle with a direct impact on a non-deformable flat surface	Abstract (Rus)
Guryanov G.A., Abdeev B.M.
No 1 (2015)	Deformation processes of elastoplastic material with defects under electrodynamic loading	Abstract (Rus)
Kukudzhanov K.V., Levitin A.L.
No 1 (2023)	MODELING OF 3D-PRINTING PROCESSES FOR COMPOSITE TOOLING AND TRANSFER MOLDING OF GRID STRUCTURES	Abstract (Rus)
Shabalin L.P., Puzyretskiy E.A., Khaliulin V.I., Batrakov V.V.
No 4 (2019)	Experimental analysis of the effect of discrete aggregate on the bending stability of thin-walled cylindrical shells	Abstract (Rus)
Petrov M.V.
No 4 (2015)	Structure and mechanical properties of zirconium oxide modified with carbon nanotubes	Abstract (Rus)
Lyapunova E.A., Grigoriev M.V., Skachkov A.P., Naimark O.B., Kulkov S.N.
No 4 (2022)	PREDICTION OF THE BEARING CAPACITY OF THE HIP JOINT ENDOPROSTHESIS FROM THE С/C COMPOSITES	Abstract (Rus)
Razumovskii E.S., Shavshukov V.E., Anoshkin A.N.
No 3 (2019)	Inverse coefficient problems in mechanics	Abstract (Rus)
Vatulyan A.O., Plotnikov D.K.
No 1 (2015)	NUMERICAL MODELLING OF PERFORATED SHELLS STABILITY	Abstract (Rus)
Antipov A.A., Artemyeva A.A., Bazhenov V.G., Zhestkov M.N., Kibec A.I.
No 3 (2022)	Development of the digital image correlation (DIC) method for mechanical testing at elevated temperatures	Abstract (Rus)
Strungar E.M., Lobanov D.S.
No 3 (2019)	Simulation of Metal Powder Bidirectional Compression in a Pressing Tool with a Floating Die	Abstract (Rus)
Berezin I.M., Zalazinskii A.G., Nesterenko A.V., Bykova T.M.
No 4 (2015)	Natural vibrations of heated functionally graded cylindrical shells with fluid	Abstract (Rus)
Bochkarev S.A., Lekomtsev S.V.
No 1 (2022)	Calculation of VAT and assessment of the strength of a segmented cylindrical shell made of composite materials with metal inserts	Abstract (Rus)
Rogozhnikova E.N., Anoshkin A.N., Bulbovich R.V.
No 2 (2019)	Hydroelastic stability of coaxial cylindrical shells made of piezoelectric material	Abstract (Rus)
Bochkarev S.A., Lekomtsev S.V.
No 3 (2016)	Load-bearing capacity of ice weakened plates of curvilinear shape with variable thickness	Abstract (Rus)
Romanova T.P.
No 4 (2021)	Modeling of rubber-cord layers under quasi-static loading	Abstract (Rus)
Sheshenin S.V., Yikun D., Chistyakov P.V., Artamonova N.B.
No 4 (2018)	RELIABILITY ASSESSMENT OF MULTILAYER PIPES FROM POLYMER MATERIALS	Abstract (Rus)
Bochkareva S.A., Grishaeva N.Y., Lyukshin B.A., Lsukshin P.A., Matolygina N.Y., Panin S.V., Reutov Y.A.
No 3 (2016)	Surface SH-Waves in Pre-Stressed Piezoelectrics with Functionally Graded	Abstract (Rus)
Belyankova T.I., Kalinchuk V.V.
No 4 (2021)	Simultaneous identification of mechanical properties of functionally graded plates under the Kirchhoff and Tymoshenko models	Abstract (Rus)
Bogachev I.V.
No 1 (2014)	Investigation of panel flutter of functionally graded circular cylindrical shells	Abstract
Bochkarev S.A., Lekomtsev S.V.
No 1 (2017)	The possibilities and limitations of the homogenized description of inelastic behavior of brittle porous materials under constrained conditions	Abstract (Rus)
Astafurov S.V., Shilko E.V., Psakhie S.G.
No 3 (2021)	Comparison of foam models from regular and irregular arrays of Gibson-Ashby open-cells	Abstract (Rus)
Kornievsky A.S., Nasedkin A.V.
No 1 (2017)	Strength computational and experimental analysis of turbojet fan case under the impact of a torn blade	Abstract (Rus)
Kurteyev V.A., Burdyugov S.I., Inozemtsev A.A., Lomaev V.I., Mozerov B.G., Sokolovskiy M.I., Shatrov V.B.
No 2 (2021)	Modeling the Effective Conductive Properties of Polymer Nanocomposites with a Random Arrangement of Graphene Oxide Particles	Abstract (Rus)
Tashkinov M.A., Dobrydneva A.D., Matveenko V.P., Silberschmidt V.V.
No 2 (2013)	Development of experimental equipment for hydrostatic compression of porous materials	Abstract (Rus)
Berezin I.M.
No 6 (2023)	INFLUENCE OF VARIABLE YOUNG’S MODULUS ON RESIDUAL STRESSES INDUCED BY ROTATIONAL AUTOFRETTAGE OF A TUBE WITH FIXED ENDS	Abstract (Rus)
Prokudin A.N.
No 2 (2017)	NONLINEAR EQUILIBRIUM EQUATIONS OF THE CONICAL SHELL STIFFENED BY A DISCRETE SET OF FRAMES	Abstract (Rus)
Dudchenko A.A., Sergeev V.N.
No 4 (2020)	Numerical analysis of the spherical bearing geometric configuration with antifriction layer made of different materials	Abstract (Rus)
Adamov A.A., Kamenskih A.A., Pankova A.P.
1 - 34 of 34 Items

Search tips:

• Search terms are case-insensitive
• Common words are ignored
• By default only articles containing all terms in the query are returned (i.e., AND is implied)
• Combine multiple words with OR to find articles containing either term; e.g., education OR research
• Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
• Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
• Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
• Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"