| Issue |
Title |
| Vol 18, No 4 (2016) |
Investigation low-carbon steel after electro-spark alloying and high-temperature heating |
|
|
Trekin G.E., Shevchenko O.I. |
| Vol 21, No 2 (2019) |
Research of weldability of pipe steel X65QS ordered for sour service |
|
|
Khudyakov A.O., Korobov Y.S., Danilkin P.A. |
| Vol 16, No 4 (2014) |
THE POSSIBILITY OF MULTILAYER METALLIC MATERIALS FOR THE MANUFACTURE OF HIGH PRESSURE CYLINDERS |
|
|
Plokhikh A.I. |
| Vol 23, No 3 (2021) |
RESEARCH OF STRUCTURE AND PROPERTIES OF STEEL 25MN2SI |
|
|
Olshanskaya T.V., Fedoseeva E.M. |
| Vol 19, No 1 (2017) |
CHANGE THE MICROSTRUCTURE OF SPARINGLY ALLOYED STEEL DEPENDING ON THE SPEED OF CONTINUOUS COOLING AND TEMPERATURE OF ISOTHERMAL HOLDING |
|
|
Iurchenko A.N., Panov D.O., Simonov I.N. |
| Vol 21, No 3 (2019) |
DETERMINATION OF CRITICAL TEMPERATURES AC1 AND AC3 IN STEELS ALLOYING SYSTEM H2G2S2MF USING THE DILATOMETRIC METHOD AND THE METHOD OF TESTING QUENCHING |
|
|
Iurchenko A.N., Marieva M.A., Grebenkin R.D., Simonov I.N. |
| Vol 17, No 1 (2015) |
EFFECT ALUMINIUM ELECTRO-SPARK TECHNOLOGICAL DEPOSIT AND TEMPERINGS TEMPERATURE ON MICROSTRUCTURE AND PROPERTIES LOW-CARBON, LOW-ALLOYED WELD |
|
|
Trekin G.E., Shevchenko O.I. |
| Vol 23, No 4 (2021) |
INFLUENCE OF HEAT TREATMENT MODES ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE METASTABLE TITANIUM ALLOY VT23 |
|
|
Veselova V.E., Gladkovsky S.V., Kovalev N.I. |
| Vol 19, No 2 (2017) |
HIGH TEMPERATURE PSEUDO-INVAR EFFECT IN MULTILAYER STEEL MATERIALS |
|
|
Plokhikh A.I., Kolesnikov A.G., Safonov M.D. |
| Vol 21, No 3 (2019) |
THE STUDY OF TRANSFORMATIONS, STRUCTURE AND PROPERTIES OF STEEL 12Kh3G2МFS AFTER QUENCHING FROM INTER-CRITICAL TEMPERATURE INTERVAL |
|
|
Poduzov D.P., Simonov Y.N., Yurchenko A.N. |
| Vol 17, No 1 (2015) |
Investigation of influence of structural on the stress-strain state in the process of pressure treatment |
|
|
Baryshnikov M.P., Chukin M.V., Boiko A.B. |
| Vol 24, No 1 (2022) |
INVESTIGATION OF THE STRUCTURE AND DEFECTIVENESS OF TITANIUM ALLOYS DURING SURFACING |
|
|
Homutinin I.S., Akulova S.N., Myshkina A.V., Krivonosova E.A., Lyamin Y.V. |
| Vol 19, No 3 (2017) |
The comparison research of plasma surface hardening of 34CrNiMo6 steel produced on direct polarity and reversed polarity current |
|
|
Shitsyn Y.D., Belinin D.S., Neulybin S.D., Sinani I.L., Terentyev S.A., Verkhorubov V.S. |
| Vol 21, No 4 (2019) |
THE INFLUENCE OF LASER EXPOSURE ON THE STATE OF HARDENED HIGH-SPEED STEEL Р6М5 |
|
|
Tokarev D.I., Drozdov A.A., Morozov E.A., Ablyaz T.R., Ivanova Y.S., Polezhaev I.S. |
| Vol 17, No 4 (2015) |
INFLUENCE OF STRUCTURE AND NONMETALLIC INCLUSIONS ON PROPERTIES OF WELDED SEAMS FROM X65 STEEL |
|
|
Fedoseeva E.M. |
| Vol 19, No 3 (2017) |
RESEARCH OF GRAPHITIC INCLUSIONS IN MICROSTRUCTURES OF CAST IRON OF BRAKE LOCOMOTIVE SHOES |
|
|
Klimov A.A., Struchkov A.V., Bondarik V.B., Ilyinsky V.P., Domnin S.V., Kirpichenko V.P. |
| Vol 22, No 2 (2020) |
The influence of the microstructure of the electrode-tool on the efficiency of EDM materialsprocess |
|
|
Shiryaev V.V., Ablyaz T.R., Schlykov E.S., Pustovalov D.O., Smolentsev E.V. |
| Vol 18, No 1 (2016) |
THE INFLUENCE OF THE CONTINUOUS COOLING AND OF THE AUSTEMPERING ON A MICROSTRUCTURE AND OF MECHANICAL PROPERTIES IN STEELS 17Cr2Mn2Si2MoV AND 29Cr2Mn2Si2MoV |
|
|
Iurchenko A.N., Simonov I.N., Mikriukov M.I. |
| Vol 20, No 3 (2018) |
36NKhTYu alloy to EP517 steel dissimilar welded joints structural strength increase due to optimization of weld seam dimensions |
|
|
Terentyev E.V., Marchenkov A.Y., Sliva A.P., Goncharov A.L. |
| Vol 22, No 4 (2020) |
Comparative Study on Cavitation Resistance of deposited metal with metastable structure and stable austenite |
|
|
Korobov Y.S., Alwan H.L., Filippov M.A., Shumyakov V.I., Soboleva N.N., Sirosh V.A., Estemirova S.H., Makarov A.V. |
| Vol 18, No 3 (2016) |
MICROSTRUCTURAL FEATURES, MECHANICAL PROPERTIES AND HEAT TREATMENT OF BAINITIC STEEL |
|
|
Yurchenko A.N., Simonov Y.N. |
| Vol 20, No 4 (2018) |
Research of the effect of rare-earth elements on ceramic materials based on ZrB2 - SiC (20 vol. %), obtained by spark plasma sinter |
|
|
Kulmetyeva V.B., Porozova S.E., Chuvashov V.E., Yaburov M.P. |
| Vol 23, No 1 (2021) |
Investigation of properties of metal-glass material based on carbonyl iron powder VK-1 T |
|
|
Khlybov A.A., Maltcev I.M., Belyaev E.S., Getmanovskiy Y.A., Belyaeva S.S. |
| Vol 18, No 3 (2016) |
Microstructure and dynamic loading resistance of layered steel/Al-composite produced by rolling |
|
|
Gladkovsky S.V., Kuteneva S.V., Veselova V.E., Kokovikhin E.A. |
| Vol 20, No 4 (2018) |
Technological recommendations about laser heat threatmens of powder pseudo-alloy FeC1Cu15 |
|
|
Morozov E.A., Oglezneva S.A. |
| Vol 23, No 1 (2021) |
Prospects for the use of a reverse polarity plasma arc for correcting casting defects in products made of AK7Ch alloy |
|
|
Belinin D.S., Schitsyn Y.D., Nikulin R.G., Olshanskaya T.V., Zagrebin D.S., Pichkalev M.V. |
| Vol 18, No 3 (2016) |
PROCESS ELECTRIC-SPARK CARBURIZING IN AN ULTRASONIC FIELD |
|
|
Shevchenko O.I., Trekin G.E. |
| Vol 21, No 2 (2019) |
Influence of temperature and time of thermal processing on the structure of enamel coating |
|
|
Soshina T.O., Mukhamadyarova V.R. |
| Vol 23, No 2 (2021) |
Improvement of valve rods thread connection run life at cyclic loading |
|
|
Moltsen S.N., Kravchenko A.V., Simonov Y.N., Polezhayev R.M. |
| Vol 21, No 2 (2019) |
USE OF PLASMA SURFACE FOR ADDITIVE FORMATION OF ALUMINUM ALLOYS BLADE |
|
|
Shchitsin Y.D., Krivonosova E.A., Neulubin S.D., Olshanskaya T.V., Nikulin R.G., Fedoseeva E.M., Terentyev S.A. |
| Vol 23, No 2 (2021) |
Influence of current frequency during pulse layer plasma surface on the structure and properties of high-alloy steel during additive formation of products |
|
|
Dushina A.Y., Olshanskaya T.V., Neulybin S.D., Shchitsyn Y.D., Nikulin R.G. |
| Vol 18, No 4 (2016) |
THE INFLUENCE OF HEAT TREATMENT ON QUALITY OF WELDED JOINTS IN THE SECOND STAGE OF UNITS IN THE ROLLING SHOP NO. 11 OJSC “Magnitogorsk Iron and Steel Works” |
|
|
Lazareva A.I., Kopceva N.V., Gorlenko D.A., Efimova J.J., Nikitenko O.A., Golubchik E.M. |
| Vol 21, No 2 (2019) |
INFLUENCE OF ULTRASOUND IMPACT IN THE PROCESS OF THE STACKING CYCLE, ON THE PROPERTIES AND STRUCTURE OF THE SURFACED METAL FROM 12Cr18Ni10Ti STEEL |
|
|
Shitsyn Y.D., Neulybin S.D., Belinin D.S., Nikulin R.G., Karunakaran K.P. |
| Vol 16, No 4 (2014) |
FORMATION OF MICROSTRUCTURE AND PROPERTIES OF THE COMPOSITION "HARDFACING LAYER-BASE METAL" IN THE ULTRASONIC WAVE |
|
|
Shevchenko O.I., Trekin G.E. |
| Vol 23, No 3 (2021) |
ABOUT INFLUENCE OF PLASMA SURFACE SCHEMES ON THE FORMATION OF THE STRUCTURE AND PROPERTIES OF TITANIUM ALLOY |
|
|
Akulova S.N., Myshkina A.V., Varushkin S.V., Neulybin S.D., Krivonosova E.A., Shchitsyn Y.D., Olshanskaya T.V. |
| Vol 18, No 4 (2016) |
INFLUENCE OF SPEED OF COOLING ON FORMATION OF STRUCTURE OF A RAIL STEEL MICROALLOYED BY VANADIUM AND NIOBIUM |
|
|
Polevoy E.V., Dobuzhskaya A.B., Temlyantsev M.V. |
| 1 - 36 of 36 Items |
|
