Issue	Title
No 1 (2019)	Lifetime of AMg6 Alloy under Consecutive Shock-Wave and Gigacycle Loading	Abstract (Rus)
Oborin V.A., Bannikov M.V., Bayandin Y.V., Naimark O.B.
No 1 (2023)	NUMERICAL SIMULATION OF GAS-DYNAMIC AND STRENGTH CHARACTERISTICS OF A FAN FOR THE EXPERIMENTAL TEST RIG FOR INVESTIGATION OF ICE BREAKDOWN ON ROTATING WORKING BLADES	Abstract (Rus)
Kalyulin S.L., Kalyulin N.A., Modorskii V.Y., Vladimirov N.V.
No 3 (2015)	Analysis of fragmentation of plates of synthetic mineral alloys under impact of ball high velocity by visualization technique	Abstract (Rus)
Ignatova A.M., Nikhamkin M.A., Voronov V.L., Ignatov M.N.
No 3 (2020)	Models of hydrogen influence on the mechanical properties of metals and alloys	Abstract (Rus)
Yakovlev Y.A., Polyanskiy V.A., Sedova Y.S., Belyaev A.K.
No 1 (2018)	Applied grinding model of a solid particle with a simple shape on impact with a hard surface	Abstract (Rus)
Guryanov G.A., Abdeev B.M., Klimenko Y.A.
No 4 (2018)	The Experimental and Theoretical Study of Large Deformations of Cylindrical Samples from Steel 09G2S with Stress Concentrators under Tension-Torsion Loading to Failure	Abstract (Rus)
Bazhenov V.G., Kazakov D.A., Nagornykh E.V., Osetrov D.L., Ryabov A.A.
No 4 (2022)	ANALYSIS OF MESOSTRUCTURE AND FRACTURE KINETICS OF ELEMENTS OF LATTICE COMPOSITE STRUCTURES UNDER TRANSVERSAL COMPRESSION USING STOCHASTIC FEA MICROMECHANICS	Abstract (Rus)
Sapozhnikov S.B., Shaburova N.A., Ignatova A.V., Shanygin A.N.
No 3 (2016)	Evaluation of service life of heat-resistant alloys under cyclic thermomechanical loading	Abstract (Rus)
Volkov I.A., Igumnov L.A.
No 3 (2020)	Structural failure criterion for spatially-reinforced carbon-carbon composite materials	Abstract (Rus)
Magnitsky I.V.
No 1 (2019)	The Research of the Mechanical Behavior of Elastically Transformable Composite Structures	Abstract (Rus)
Khaliulin V.I., Batrakov V.V., Shabalin L.P., Kiauka M.Y., Bezzametnov O.N.
No 3 (2022)	Study of deformation structures maps in metals under tension	Abstract (Rus)
Barannikova S.A., Iskhakova P.V.
No 2 (2016)	Theoretical-experimental study of mechanical behavior in 3D composites under quasi-steady damage	Abstract (Rus)
Tsepennikov M.V., Strom A.A., Povyshev I.A., Smetannikov O.Y.
No 2 (2020)	Nonlinear dynamics and stages of damage of Ti6Al4V and Ti45Nb titanium alloys in very high cycle fatigue	Abstract (Rus)
Bannikov M.V., Oborin V.A., Bilalov D.A., Naimark O.B.
No 1 (2019)	Comprehensive analysis of mechanical behavior and fracture processes of specimens of three-dimensional reinforced carbon fiber in tensile tests	Abstract (Rus)
Tretyakova T.V., Dushko A.N., Strungar E.M., Zubova E.M., Lobanov D.S.
No 2 (2022)	Analysis of the limiting states of cylindrical elastic-plastic shells under tension and combined loading by internal pressure and tension	Abstract (Rus)
Bazhenov V.G., Kazakov D.A., Osetrov S.L., Osetrov D.L., Ryabov A.A.
No 4 (2016)	The influence of fluid filtration on the strength of porous fluid-saturated brittle materials	Abstract (Rus)
Dimaki A.V., Shilko E.V., Astafurov S.V., Psakhie S.G.
No 2 (2020)	The Numerical study of the influence of a two-scale pore structure on the dynamic strength of water-saturated concrete	Abstract (Rus)
Konovalenko I.S., Shilko E.V., Konovalenko I.S.
No 1 (2019)	The Influence of Stress Concentrators on the Magnesium Alloy Mechanical Behavior under Deformation at High Strain Rates in the Temperature Range from 295 to 673 K	Abstract (Rus)
Skripnyak V.A., Skripnyak V.V., Kozulin A.A., Iohim K.V.
No 4 (2020)	Study Smart-layer effect on the physical and mechanical characteristics of the samples from polymer composite materials under quasi-static loading	Abstract (Rus)
Shipunov G.S., Baranov M.A., Nikiforov A.S., Golovin D.V., Tihonova A.A.
No 4 (2016)	Algorithms for numerical simulation of structures deformation and fracture within relations of damaged medium mechanics	Abstract (Rus)
Gorokhov V.A., Kazakov D.A., Kapustin S.A., Churilov Y.A.
No 1 (2020)	The Applied model of grinding a spherical solid particle with a direct impact on a non-deformable flat surface	Abstract (Rus)
Guryanov G.A., Abdeev B.M.
No 4 (2020)	Modeling of deformation and fracture of porous media taking into account their morphological composition	Abstract (Rus)
Shalimov A.S., Tashkinov M.A.
No 3 (2016)	Computational and experimental research of the contact debonding process when rigid reinforcement is pressed into concrete	Abstract (Rus)
Kashevarova G.G., Martirosyan A.S., Travush V.I.
No 3 (2019)	Buckling Problem of Composite Thin-Walled Structures with Properties Dependent on Loading Types	Abstract (Rus)
Fedorenko A.N., Fedulov B.N., Lomakin E.V.
No 1 (2019)	Application of the Acoustic Emission Technique to Studying the Damage Accumulation in a Functional Ceramic Coating	Abstract (Rus)
Zubova E.M., Lobanov D.S., Strungar E.M., Wildemann V.E., Lyamin Y.B.
No 4 (2020)	Damage development under very-high-cycle fatigue regime	Abstract (Rus)
Nikitin I.S., Nikitin A.D., Stratula B.A.
No 4 (2016)	Numerical analysis of dynamic strength of composite cylindrical shells under multiple-pulse exposures	Abstract (Rus)
Abrosimov N.A., Elesin A.V.
No 3 (2019)	The Modeling of the Edge Fatigue Crack Growth under High Frequency Loading	Abstract (Rus)
Nikitin A.D., Nikitin I.S., Stratula B.A.
No 3 (2024)	FEATURES OF DEFORMATION OF A BIMETALLIC PLATE	Abstract (Rus)
Barannikova S.A., Li Y.V.
No 2 (2014)	Features of low-temperature deformation and fracture of combined plastic pipes	Abstract (Rus)
Anoshkin A.N., Pospelov A.B., Iakushev R.M.
No 4 (2020)	Inelastic behavior and destruction of materials under isothermal and non-isothermal, simple and complex loads	Abstract (Rus)
Bondar V.S., Abashev D.R.
No 1 (2017)	The possibilities and limitations of the homogenized description of inelastic behavior of brittle porous materials under constrained conditions	Abstract (Rus)
Astafurov S.V., Shilko E.V., Psakhie S.G.
No 3 (2019)	The Assessment of Fatigue Durability and Critical Plane Determination for Multiaxial Cyclic Loading at an Arbitrary Shift of Phases	Abstract (Rus)
Burago N.G., Nikitin I.S., Nikitin A.D., Stratula B.A.
No 2 (2024)	INFLUENCE OF ADDITIVE MANUFACTURING TECHNOLOGY OF TOPOLOGICALLY OPTIMIZED PRODUCTS FROM PHOTOPOLYMER RESINS ON THE ANISOTROPY OF THEIR MECHANICAL PROPERTIES	Abstract (Rus)
Ezhov A.D., Kotovich I.V., Kiselev V.P.
No 3 (2014)	ROTATIONAL DEFORMATION MODE OF POROUS STRUCTURES	Abstract (Rus)
Avdeenko A.M., Krupin Y.A., Pimenova N.A.
No 4 (2020)	Numerical simulation of deformation and fracture of metal-matrix composites with considering residual stresses	Abstract (Rus)
Zemlianov A.V., Evtushenko E.P., Balokhonov R.R.
No 3 (2017)	The numerical model of dynamic mechanical behavior of brittle materials based on the concept of the kinetic theory of strength	Abstract (Rus)
Grigoriev A.S., Shilko E.V., Skripnyak V.A., Chernyavsky A.G., Psakhie S.G.
No 3 (2019)	The Analysis of residual stresses in layered composites with [0°/90°] layup	Abstract (Rus)
Bondarchuk D.A., Fedulov B.N., Fedorenko A.N., Lomakin E.V.
No 6 (2023)	LOCAL DAMAGES IN THE HIP JOINT ENDOPROSTHESIS FROM THE С/С COMPOSITE DURING OVERLOADS	Abstract (Rus)
Razumovskii E.S., Shavshukov V.E.
No 4 (2014)	Coupled model of fluid-saturated porous materials based on a combination of discrete and continuum approaches	Abstract (Rus)
Dimaki A.V., Shilko E.V., Astafurov S.V., Korostelev S.Y., Psakhie S.G.
No 4 (2020)	Investigation of damage accumulation and delamination propagation in polymer composite materials based on two-level fracture models	Abstract (Rus)
Dolgikh D.A., Tashkinov M.A.
No 4 (2017)	The Stress-Strain State and Failure of Structural Elements with Sharp Stress Concentrators under Bending	Abstract (Rus)
Sapozhnikov S.B., Ivanov M.A., Yaroslavtsev S.I., Shcherbakov I.A.
No 2 (2019)	Research methods of structural and phase transformations in nanomaterials deformed under pressure	Abstract (Rus)
Vasil’ev L.S., Lomaev S.L.
No 4 (2023)	ELASTIC-PLASTIC BEHAVIOR AND FRACTURE OF STRUCTURES WITH LOSS CONCENTRATORS UNDER CYCLIC LOADS	Abstract (Rus)
Bondar V.S., Abashev D.R., Fomin D.J.
No 2 (2015)	Fractal analysis of fracture surface of aluminum alloy AMg6 under fatigue and dynamic loading	Abstract (Rus)
Oborin V.A., Bannikov M.V., Bayandin Y.V., Sokovikov M.A., Bilalov D.A., Naimark O.B.
No 4 (2020)	Analysis of the fracture toughness parameters at the free edge in layered composites	Abstract (Rus)
Bondarchuk D.A., Fedulov B.N., Fedorenko A.N., Lomakin E.V.
No 4 (2017)	Determination of the critical plane and assessment of fatigue durability under various cyclic loading regimes	Abstract (Rus)
Nikitin I.S., Burago N.G., Nikitin A.D., Yakushev V.L.
No 4 (2018)	Generalized dynamic theory of a solid particle grinding by pulse-force compression with two non-deformable balls	Abstract (Rus)
Abdeev B.M., Baigereyev S.R., Guryanov G.A.
1 - 48 of 48 Items

Search tips:

• Search terms are case-insensitive
• Common words are ignored
• By default only articles containing all terms in the query are returned (i.e., AND is implied)
• Combine multiple words with OR to find articles containing either term; e.g., education OR research
• Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
• Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
• Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
• Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"