Issue	Title
No 5 (2023)	DEFORMATION OF A THIN FILM AFTER CONTACT LOSS WITH A CYLINDRICAL BASE AXIAL DELAMINATION	Abstract (Rus)
Ustinov K.B., Gandilyan D.V.
No 3 (2018)	A Thermodiffusion Problem of Hydrogenation of a Steel Shell Structure	Abstract (Rus)
Emel'yanov I.G., Mironov V.I.
No 1 (2017)	Strength computational and experimental analysis of turbojet fan case under the impact of a torn blade	Abstract (Rus)
Kurteyev V.A., Burdyugov S.I., Inozemtsev A.A., Lomaev V.I., Mozerov B.G., Sokolovskiy M.I., Shatrov V.B.
No 1 (2024)	STRESS-STRAIN STATE OF THIN-WALLED PIPE BLANKS DURING CRIMPING IN A CURVED AXISYMMETRIC MATRIX	Abstract (Rus)
Andrianov I.K., Feoktistov S.I., Maryin S.B.
No 1 (2019)	The Effect of Preliminary Plastic Hardening by Tension on the Cylindrical Shells Buckling during Torsion	Abstract (Rus)
Bazhenov V.G., Zhegalov D.V., Kazakov D.A., Kibec A.I., Nagornykh E.V., Samsonova D.A.
No 2 (2017)	NONLINEAR EQUILIBRIUM EQUATIONS OF THE CONICAL SHELL STIFFENED BY A DISCRETE SET OF FRAMES	Abstract (Rus)
Dudchenko A.A., Sergeev V.N.
No 1 (2014)	Influence of circular hole on the shell stress state for arbitrary Gaussian curvature	Abstract
Dovbnya E.N., Krupko N.A.
No 1 (2018)	ESTIMATION OF THE CYLINDRICAL COMPOSITE SHELL STIFFNESS AT THE INITIAL STAGE OF CURING DURING DEPLOYMENT BY INTERNAL PRESSURE	Abstract (Rus)
Gilev V.G., Rusakov S.V., Pestrenin V.M., Pestrenin I.V.
No 4 (2022)	ANALYSIS OF MESOSTRUCTURE AND FRACTURE KINETICS OF ELEMENTS OF LATTICE COMPOSITE STRUCTURES UNDER TRANSVERSAL COMPRESSION USING STOCHASTIC FEA MICROMECHANICS	Abstract (Rus)
Sapozhnikov S.B., Shaburova N.A., Ignatova A.V., Shanygin A.N.
No 3 (2013)	TERMOUPRUGOST' MIKROPOLYaRNYKh ORTOTROPNYKh TONKIKh OBOLOChEK	Abstract (Rus)
Sargsyan S.H., Farmanyan A.J.
No 3 (2022)	Modal analysis of a hydrogen-damaged pipe as shell inhomogeneous on thickness	Abstract (Rus)
Filippenko G.V., Zinovieva T.V.
No 3 (2013)	O reshenii zadachi ravnovesiya myagkoy setchatoy obolochki pri nalichii nagruzki, sosredotochennoy v tochke	Abstract (Rus)
Badriev I.B., Banderov V.V., Zadvornov O.A.
No 1 (2022)	Calculation of VAT and assessment of the strength of a segmented cylindrical shell made of composite materials with metal inserts	Abstract (Rus)
Rogozhnikova E.N., Anoshkin A.N., Bulbovich R.V.
No 3 (2014)	TWO-DIMENSIONAL (SHELL-TYPE) AND THREE-DIMENSIONAL MODELS FOR ELASTIC THIN-WALLED CYLINDER	Abstract (Rus)
Yeliseyev V.V., Zinovieva T.V.
No 3 (2021)	The Numerical simulation of composite sandwich cylindrical shells reinforced with circular frames under local loadings	Abstract (Rus)
Sukhomlinov L.G., Shivrin M.V.
No 1 (2015)	NUMERICAL MODELLING OF PERFORATED SHELLS STABILITY	Abstract (Rus)
Antipov A.A., Artemyeva A.A., Bazhenov V.G., Zhestkov M.N., Kibec A.I.
No 2 (2021)	An Analytical Approach to Obtaining the Stress Field of a Cylindrical Shell with a Circular Hole under Tension	Abstract (Rus)
Kashtanova S.V., Rzhonsnitskiy A.V.
No 4 (2015)	Modelling of deformation of wire spiral structures	Abstract (Rus)
Danilin A.N., Kurdumov N.N., Kuznetsova E.L., Rabinsky L.N.
No 1 (2021)	Compensatory bellows oscillations as a corrugated shell with liquid inside	Abstract (Rus)
Zinovieva T.V., Piskunov V.A.
No 4 (2015)	Natural vibrations of heated functionally graded cylindrical shells with fluid	Abstract (Rus)
Bochkarev S.A., Lekomtsev S.V.
No 4 (2020)	Investigation of the Winkler foundation model applicability for describing the contact interaction of elastoplastic shells with a core under external pressure	Abstract (Rus)
Bazhenov V.G., Nagornykh E.V., Samsonova D.A.
No 2 (2016)	Rationale of the use of the constructive anisotropy method in the calculation of shallow shells of double curvature, weakened holes	Abstract (Rus)
Kamenev I.V., Semenov A.A.
No 2 (2024)	THE LIMITING STATE OF A STEEL STRUCTURE UNDER EXTREME THERMOMECHANICAL LOADINGS	Abstract (Rus)
Emel yanov I.G., Kislov A.N.
No 4 (2019)	About a new approach to calculating spiral clamps	Abstract (Rus)
Danilin A.N., Zhavoronok S.I., Rabinsky L.N.
No 2 (2016)	Special features of numerical simulation for elastic-plastic buckling of hemispherical shells under loading with the rigid indenter	Abstract (Rus)
Bazhenov V.G., Demareva A.V., Zhestkov M.N., Kibets A.I.
No 2 (2024)	DEFORMATION OF A THIN FILM AFTER CONTACT LOSS WITH A CYLINDRICAL BASE, WITH ACCOUNTING FOR THE INFLUENCE OF ITS CURVATURE, COMPLIANCE, AND ACTION OF TRANSVERSE FORCES; DELAMINATION LOCATED IN THE CIRCUMFERENTIAL DIRECTION	Abstract (Rus)
Gandilyan D.V.
1 - 26 of 26 Items

Search tips:

• Search terms are case-insensitive
• Common words are ignored
• By default only articles containing all terms in the query are returned (i.e., AND is implied)
• Combine multiple words with OR to find articles containing either term; e.g., education OR research
• Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
• Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
• Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
• Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"