| Issue |
Title |
| Vol 21, No 3 (2019) |
THE INFLUENCE OF LASER TREATMENT OF POWDER STEEL PA-ZHGR ON THE GEOMETRIC PARAMETERS OF THE LASER EXPOSURE ZONE |
|
|
Usynin E.V., Oglezneva S.A., Morozov E.A. |
| Vol 17, No 1 (2015) |
FORMATION OF ULTRAFINE-GRAINED STRUCTURE IN CARBON STEEL IN THE HOT PLASTIC DEFORMATION PROCESSES |
|
|
Nikitenko O.A., Efimova I.I., Zherebtsov M.S., Koptseva N.V., Barishnikov M.P., Selivanova E.S. |
| Vol 21, No 1 (2019) |
ON THE EVALUATION OF HYDRO BLASTING INFLUENCE ON THE ENDURANCE LIMIT OF PARTS BY THE INITIAL DEFORMATIONS OF REFERENCE SPECIMEN |
|
|
Pavlov V.F., Sazanov V.P., Vakulyuk V.S. |
| Vol 16, No 3 (2014) |
The study of non-METALLIC INCLUSIONS IN METAL PIPE STEELS Using THERMAL ANALYSIS |
|
|
Fedoseeva E.M. |
| Vol 22, No 4 (2020) |
Calorimetric effects during phase transformations in steel 38KH2MYUA |
|
|
Dyshlyuk M.A., Spivak L.V., Simonov Y.N. |
| Vol 19, No 3 (2017) |
Increase of efficiency Electrical discharge machining of details of hydraulic cylinders and products of special purpose by application of electrodes with the raised Electrical discharge machining properties |
|
|
Grisharin A.O., Ablyaz T.R., Ogleznev N.D. |
| Vol 21, No 2 (2019) |
INFLUENCE OF ULTRASOUND IMPACT IN THE PROCESS OF THE STACKING CYCLE, ON THE PROPERTIES AND STRUCTURE OF THE SURFACED METAL FROM 12Cr18Ni10Ti STEEL |
|
|
Shitsyn Y.D., Neulybin S.D., Belinin D.S., Nikulin R.G., Karunakaran K.P. |
| Vol 16, No 3 (2014) |
PLASMA SURFACING OF HIGH-ALLOY STEEL 10Cr18Ni8Ti ON LOW-ALLOY STEEL 09Mg2Si |
|
|
Shchitsyn Y.D., Neulybin S.D., Kuchev P.S., Gilev I.A. |
| Vol 23, No 2 (2021) |
Influence of current frequency during pulse layer plasma surface on the structure and properties of high-alloy steel during additive formation of products |
|
|
Dushina A.Y., Olshanskaya T.V., Neulybin S.D., Shchitsyn Y.D., Nikulin R.G. |
| Vol 19, No 4 (2017) |
INFLUENCE OF PARAMETERS OF MELTING ATOMIZING TECHNOLOGICAL CHARACTERISTICS OF THE POWDER OF THE BRAND 12X18H10T |
|
|
Oglezneva S.A., Smetkin A.A., Mitin V.I., Kalinin K.V. |
| Vol 21, No 3 (2019) |
STRUCTURAL PHASE CHANGES IN HEAT-AFFECTED ZONE OF 0.12C-1Cr-10Ni-1Ti-Fe STEEL AFTER MODULATED CURRENT WELDING |
|
|
Nikonenko E.L., Smirnov A.N., Popova N.A., Ababkov N.V., Knyaz'kov K.V. |
| Vol 16, No 4 (2014) |
INVESTIGATION OF PROCESS OF DYNAMIC RECRYSTALLIZATION DURING HOT DEFORMATION BASED ON PHYSICAL MODELING ON GLEEBLE 3500 SYSTEM |
|
|
Barishnikov M.P., Ishimov A.S., Zherebtsov M.S., Efimova Y.Y., Nikitenko O.A. |
| Vol 23, No 3 (2021) |
RESEARCH OF STRUCTURE AND PROPERTIES OF STEEL 25MN2SI |
|
|
Olshanskaya T.V., Fedoseeva E.M. |
| Vol 19, No 4 (2017) |
Influence of onset temperatures of thermite charge and casting molds on structure and physical-mechanical properties of casting blanks, obtained by aluminothermic reduction |
|
|
Predein V.V., Komarov O.N., Popov A.V., Zhilin S.G. |
| Vol 16, No 4 (2014) |
THE POSSIBILITY OF MULTILAYER METALLIC MATERIALS FOR THE MANUFACTURE OF HIGH PRESSURE CYLINDERS |
|
|
Plokhikh A.I. |
| Vol 19, No 4 (2017) |
PLASMA SURFACING: MATHEMATICAL MODEL, NUMERICAL IMPLEMENTATION AND VERIFICATION |
|
|
Neulybin S.D., Permyakov G.L., Trushnikov D.N., Shchitsyn I.D., Belenkiy V.Y., Belinin D.S. |
| Vol 21, No 4 (2019) |
MULTIPLE-LAYER ELECTRON BEAM SURFACING BY WIRE MATERIAL |
|
|
Varushkin S.V., Trushnikov D.N., Salomatova E.S., Belenkiy V.Y., Permyakov G.L. |
| Vol 20, No 1 (2018) |
ASSESSMENT OF A POSSIBILITY POLISHING OF STAINLESS STEELS JET ELECTROLYTIC AND PLASMA PROCESSING |
|
|
Novoselov M.V., Shilling N.G., Rudavin A.A., Radkevich M.M., Popov A.I. |
| Vol 21, No 4 (2019) |
INFLUENCE OF HEATING TEMPERATURE AND HOLDING TIME ON THE GRAIN SIZE IN MEDIUM-CARBON STRUCTURAL STEELS 29H2G2S2MF AND 44H2G2S2MF |
|
|
Iurchenko A.N., Grebenkin R.D., Menlysheva N.S., Simonov I.N. |
| Vol 18, No 3 (2016) |
Special features of the fracture surface of structural steel 09G2S after cold radial forging |
|
|
Shaimanov G.S., Simonov M.Y., Simonov Y.N., Pertsev A.S. |
| Vol 20, No 1 (2018) |
INFLUENCE OF THE MODES OF MECHANICAL PROCESSING OF STEEL 38KhN3MFA ON THE VALUE OF RESIDUAL MACROSTRESSES |
|
|
Aleksandrova O.Y., Shiryaev A.A., Snegireva A.V., Trofimov V.N., Karmanov V.V. |
| Vol 21, No 4 (2019) |
THE INFLUENCE OF LASER EXPOSURE ON THE STATE OF HARDENED HIGH-SPEED STEEL Р6М5 |
|
|
Tokarev D.I., Drozdov A.A., Morozov E.A., Ablyaz T.R., Ivanova Y.S., Polezhaev I.S. |
| Vol 18, No 3 (2016) |
Microstructure and dynamic loading resistance of layered steel/Al-composite produced by rolling |
|
|
Gladkovsky S.V., Kuteneva S.V., Veselova V.E., Kokovikhin E.A. |
| Vol 20, No 3 (2018) |
36NKhTYu alloy to EP517 steel dissimilar welded joints structural strength increase due to optimization of weld seam dimensions |
|
|
Terentyev E.V., Marchenkov A.Y., Sliva A.P., Goncharov A.L. |
| Vol 14, No 3 (2012) |
INVESTIGATION OF GEOMETRICAL CHARACTERISTICS AND THE MICROSTRUCTURE OF WELDS AT ELECTRON BEAM WELDING OF STEEL 12Х18Н10Т WITH THE ELECTRON BEAM OSCILLATION |
|
|
Salomatova E.S., Belenkiy V.Y., Trushnikov D.N., Olshanskaya T.V. |
| Vol 22, No 1 (2020) |
The mechanical properties of the material deposited on a plate of steel with high carbon equivalent |
|
|
Abashkin E.E., Zhilin S.G., Komarov O.N. |
| Vol 18, No 4 (2016) |
COMPARATIVE ANALYSIS OF CORROSION- AND WEAR RESISTANT PRODUCTS FROM COMPOSITE METAL STEEL-COPPER MADE BY PLASMA SURFACING AT CURRENTS DIRECT AND REVERSE POLARITY |
|
|
Schitsyn Y.D., Belinin D.S., Neulybin S.D., Terentyev S.A. |
| Vol 20, No 4 (2018) |
INFLUENCE OF nanodispersed poWders OF CARBON TO THE STRUCTURE AND PROPERTIES OF POWDER STEEL by SPS |
|
|
Oglezneva S.A., Kulikova A.A., Grevnov L.M., Ogleznev N.D. |
| Vol 14, No 4 (2012) |
RESEARCH OF INFLUENCE OF OSCILLATING OF THE ELECTRONIC BUNCH ON THE CHEMICAL COMPOSITION OF METAL OF THE WELD BEAD AT ELECTRON BEAM WELDING OF STEEL 12Х18Н10Т |
|
|
Salomatova E.S. |
| Vol 22, No 1 (2020) |
Study of the transformation of supercooled austenite of steel using high-resolution dilatometry |
|
|
Panov D.O., Spivak L.V. |
| Vol 18, No 4 (2016) |
THE INFLUENCE OF HEAT TREATMENT ON QUALITY OF WELDED JOINTS IN THE SECOND STAGE OF UNITS IN THE ROLLING SHOP NO. 11 OJSC “Magnitogorsk Iron and Steel Works” |
|
|
Lazareva A.I., Kopceva N.V., Gorlenko D.A., Efimova J.J., Nikitenko O.A., Golubchik E.M. |
| Vol 21, No 1 (2019) |
INFLUENCE OF MAGNETIC PROCESSING ON THE DURABILITY OF THE WORKING PARTS OF SPRING-COILING MACHINES |
|
|
Zelinskiy V.V., Gots A.N., Gusev V.G., Borisova E.A. |
| Vol 15, No 3 (2013) |
Mekhanicheskaya obrabotka zakalennykh lazerom kol'tsevykh vystupov iz poroshkovoy medistoy stali |
|
|
Morozov E.A., Rusin E.S. |
| Vol 22, No 2 (2020) |
Effective power of direct polarity arc with non-consumable electrode |
|
|
Sidorov V.P., Sovetkin D.E., Melzitdinova A.V. |
| Vol 19, No 1 (2017) |
Transformation of non-metallic inclusions in steels by the action of the plasma heat source |
|
|
Krivonosova E.A., Belinin D.S., Krivonosova E.K. |
| Vol 21, No 1 (2019) |
Investigation of the zoning of a waterjet cut's surface on structural steel of ordinary quality by the method of image analysis |
|
|
Ignatova A.M., Balabanov S.K., Ignatov M.N. |
| Vol 16, No 1 (2014) |
Structure and mechanical properties formation of the hot-forged low-carbon martensitic steel |
|
|
Romanov I.D., Shatsov A.A., Zakirova M.G. |
| Vol 22, No 4 (2020) |
Comparative Study on Cavitation Resistance of deposited metal with metastable structure and stable austenite |
|
|
Korobov Y.S., Alwan H.L., Filippov M.A., Shumyakov V.I., Soboleva N.N., Sirosh V.A., Estemirova S.H., Makarov A.V. |
| Vol 19, No 2 (2017) |
HIGH TEMPERATURE PSEUDO-INVAR EFFECT IN MULTILAYER STEEL MATERIALS |
|
|
Plokhikh A.I., Kolesnikov A.G., Safonov M.D. |
| 1 - 39 of 39 Items |
|
