| Issue |
Title |
| Vol 18, No 3 (2016) |
TEMPERATURE DISTRIBUTION IN THE COOLING OF PARTS RESTRICTED BY THE SURFACES IN THE FORM OF PARALLELEPIPED AND ELLIPTIC CYLINDER |
|
|
Rasulov S.R., Ibragimov V.A., Karimov J.A. |
| Vol 21, No 4 (2019) |
INFLUENCE OF HEATING TEMPERATURE AND HOLDING TIME ON THE GRAIN SIZE IN MEDIUM-CARBON STRUCTURAL STEELS 29H2G2S2MF AND 44H2G2S2MF |
|
|
Iurchenko A.N., Grebenkin R.D., Menlysheva N.S., Simonov I.N. |
| Vol 21, No 1 (2019) |
HEAT PHENOMENA AND THEIR INFLUENCE ON ENERGY AND FORCE PARAMETERS OF THE THERMOFRICTIONAL HARDENING |
|
|
Pokintelitsa N.I., Levchenko E.A. |
| Vol 23, No 4 (2021) |
ACTIVATION VOLUME OF PLASTIC DEFORMATION OF Ni3Ge SINGLE CRYSTALS |
|
|
Solov’eva Y.V., Gettinger M.V., Starenchenko V.A. |
| Vol 21, No 1 (2019) |
Diagnostics of weld alloys for resistance to high-temperature gas-abrasive wear |
|
|
Artem'ev A.A., Zorin I.V., Sokolov G.N., Lysak V.I., Denisevich D.S., Priyatkin D.V. |
| Vol 15, No 1 (2013) |
FACTORS INFLUENCING FORGING PROCESS PARAMETERS |
|
|
Aliiev I.S., Zhbankov I.G., Perig A.V. |
| Vol 24, No 1 (2022) |
THE METHOD OF INFRARED THERMOGRAPHY FOR DETECTING A HIDDEN DEFECT IN THE AVIATION STRUCTURE OF POLYMER COMPOSITES |
|
|
Kornilov G.A. |
| Vol 18, No 3 (2016) |
Hydrogen induced polymorphism and phase-structural bases of the hydrogen treatment of materials |
|
|
Goltsov V.A., Goltsova M.V. |
| Vol 21, No 2 (2019) |
Influence of temperature and time of thermal processing on the structure of enamel coating |
|
|
Soshina T.O., Mukhamadyarova V.R. |
| Vol 15, No 1 (2013) |
INFLUENCE OF CUTTING MACHINE THERMODYNAMIC SYSTEM PARAMETERS ON CUTTING TEMPERATURE IN THE PROCESS OF INTERRUPTED CUTTING |
|
|
Nikitin S.P. |
| Vol 24, No 1 (2022) |
INVESTIGATION OF THE STRUCTURE AND PROPERTIES OF NON-METALLIC INCLUSIONS IN STEELS |
|
|
Lomaeva T.V., Kugultinov S.D., Popov I.V., Svirschev V.I. |
| Vol 19, No 3 (2017) |
Investigation of liquid-phase reduction of steelmaking slag in the laboratory |
|
|
Gimuranova E.V., Omelchuk A.A. |
| Vol 21, No 2 (2019) |
Selection of the main criteria of the thermal cycle for the predicting methods of the structure of welds at electron-beam welding |
|
|
Olshanskaya T.V., Fedoseeva E.M. |
| Vol 16, No 4 (2014) |
RESEARCH OF PARAMETRES STABILITY OF AN OPTICAL FIBER OF PANDA TYPE UNDER EXTERNAL MECHANICAL AND TEMPERATURE INFLUENCES |
|
|
Kuzminykh Y.S., Postnikov V.S. |
| Vol 19, No 3 (2017) |
The equilibrium of the system gas-liquid for alloy Pb-Sb in vacuum distillation |
|
|
Korolev A.A., Krayukhin S.A., Maltsev G.I. |
| Vol 21, No 2 (2019) |
Definition of temperature indicators by modeling the process of globoid toothohoning depending on the parameters of the hone installation |
|
|
Spirin V.A., Makarov V.F., Khalturin O.A. |
| Vol 17, No 2 (2015) |
Austenite grain growth during heating type steel H3G3MFS And HN3MFS |
|
|
Abrosimova A.A., Panov D.O., Simonov Y.N. |
| Vol 19, No 4 (2017) |
Influence of onset temperatures of thermite charge and casting molds on structure and physical-mechanical properties of casting blanks, obtained by aluminothermic reduction |
|
|
Predein V.V., Komarov O.N., Popov A.V., Zhilin S.G. |
| Vol 21, No 3 (2019) |
EVALUATION OF TEMPERATURE FACTORS WHICH INFLUENT ON PERFORMANCE OF NEW GENERATION MAGNETORHEOLOGICAL SYSTEMS |
|
|
Naigert K.V., Tselischev V.A. |
| Vol 17, No 2 (2015) |
Features of sintering using nanosized carbide powders (scientific review) |
|
|
Antsiferov V.N., Antsiferova I.V. |
| Vol 20, No 1 (2018) |
Simulation of the temperature effect of a single pulse during electrical discharge machining |
|
|
Ablyaz T.R., Muratov K.R., Krasnovsky E.E., Borisov D.A. |
| Vol 17, No 2 (2015) |
The dependence of the densification process during sintering with the use of nanosized metal powders (scientific review) |
|
|
Antsiferova I.V. |
| Vol 20, No 2 (2018) |
FEATURES TURNING PLASTICS F-4, PA-6, F-4K20 |
|
|
Tokarev D.I., Drozdov A.A., Gulyaev M.N., Sirotenko L.D., Islamov V.F. |
| Vol 22, No 2 (2020) |
The evolution of thermophysical and physico-mechanical properties of Ti and Al cathodes in the electro arc evaporation of Ti1-xAlxN film |
|
|
Kameneva A.L., Kameneva N.V. |
| Vol 17, No 4 (2015) |
SOME FEATURES OF POLITERMS VISCOSITY INDUSTRIAL MELTS: ANOMALY, HYSTERESIS, THE CRITICAL TEMPERATURE |
|
|
Tsepelev V.S., Davydov I.S., Latypova A.I., Taushkanova A.I., Likhtenshtein V.I. |
| Vol 20, No 3 (2018) |
Penetration control for welding on analytical mathematical model of heat distribution |
|
|
Sidorov V.P., Melzitdinova A.V. |
| Vol 22, No 4 (2020) |
Features of interaction between liquid aluminum and titanium in the formation of composite materials |
|
|
Kovtunov A.I., Khokhlov Y.Y., Myamin S.V. |
| Vol 18, No 1 (2016) |
Production of ultra high temperature ceramic materials via sintering of compositions based on zirconium and hafnium borides |
|
|
Lyamin I.B., Poilov V.Z., Priamilova E.N., Zhakova O.V. |
| Vol 20, No 4 (2018) |
Features of Formation of Gradient Porous and Compact Porous Powder Structures by Selective Laser Sintering of Titanium Grade VT1-0 Spherical Powder |
|
|
Minko D.V. |
| Vol 22, No 4 (2020) |
Calorimetric effects during phase transformations in steel 38KH2MYUA |
|
|
Dyshlyuk M.A., Spivak L.V., Simonov Y.N. |
| Vol 18, No 2 (2016) |
INVESTIGATION OF THE EFFECT OF GRAIN SIZE AUSTENITE ON PHASE TRANSFORMATION TEMPERATURE IRON-BASED ALLOYS |
|
|
Oglezneva S.A., Saenkov K.L. |
| Vol 21, No 1 (2019) |
Features of structure formation of heat-resistant weld metal based on Ni3Al |
|
|
Zorin I.V., Sokolov G.N., Lysak V.I., Dubcov U.N., Denisevich D.S., Fastov S.A. |
| Vol 23, No 1 (2021) |
Investigation of parameters of plasma formed in the zone of laser welding in vacuum |
|
|
Letyagin I.Y., Felikan K.V., Belenkiy V.Y., Erikov A.P. |
| Vol 18, No 2 (2016) |
The using of quasi-static magnetic hysteresis loops to control steel structures |
|
|
Novikov V.F., Neradovskii D.F., Sokolov R.A. |
| 1 - 34 of 34 Items |
|
