Issue |
Title |
No 2 (2016) |
Separation process modeling of composite with adhesive layer |
|
Glagolev V.V., Markin A.A., Fursaev A.A. |
No 1 (2024) |
CALCULATION OF STATIC DEFORMATION OF AXISYMMETRIC SHELLS OF ROTATION WITH DIFFERENTIAL MODEL |
|
Nguyen C.M., Shelevaya D.R., Krasnorutskiy D.A. |
No 1 (2022) |
Finite element calculation of an elliptical cylinder in a geometrically nonlinear formulation using the vector form of the interpolation procedure |
|
Klochkov Y.V., Dzhabrailov A.S., Ishchanov T.R., Marchenko S.S., Andreev A.S., Klochkov M.Y. |
No 4 (2018) |
Mechanics of collisions of solids: influence of friction and adhesion. II Numerical modeling |
|
Lyashenko I.A., Willert E., Popov V.L. |
No 2 (2015) |
Experimental finding of dynamic deformation fields in metal and composite plates under impact |
|
Nikhamkin M.S., Voronov L.V., Bolotov B.P. |
No 1 (2019) |
Development of the Digital Image Correlation Method to Study Deformation and Fracture Processes of Structural Materials |
|
Lyubutin P.S., Panin S.V., Titkov V.V., Eremin A.V., Sunder R. |
No 2 (2018) |
Models of molecular dynamics: a review of EAM-potentials. Part 2. Potentials for multi-component systems |
|
Volegov P.S., Gerasimov R.M., Davlyatshin R.P. |
No 3 (2022) |
Numerical simulation of the nickel alloy microstructure formed in the process of hot fogging |
|
Rogovoy A.A., Salikhova N.K. |
No 3 (2019) |
Inverse coefficient problems in mechanics |
|
Vatulyan A.O., Plotnikov D.K. |
No 3 (2013) |
MATEMATIChESKOE MODELIROVANIE USTANOVIVShEYSYa FIL'TRATsII S MNOGOZNAChNYM ZAKONOM |
|
Badriev I.B., Nechaeva L.A. |
No 1 (2024) |
ON IDENTIFICATION OF PARAMETERS OF A NONLINEAR CONSOLIDATION MODEL OF SANDY SOIL |
|
Artamonova N.B., Sheshenin S.V. |
No 1 (2022) |
Numerical modeling of natural vibrations of coaxial shells partially filled with fluid, taking into account the effects on the free surface |
|
Bochkarev S.A., Lekomtsev S.V., Senin A.N. |
No 4 (2018) |
Optimization of mechanical characteristics of models of laminate composites using embedded optical fiber strain sensors |
|
Tashkinov M.A., Matveenko V.P. |
No 3 (2015) |
A grid method quantifying deformed Mg-alloys by Equal-Channel Angular Pressing |
|
Skryabina N.E., Aptukov V.N., Romanov P.V., Fruchart D. |
No 2 (2017) |
Modelling the generation of new material surfaces in a composite with an adhesion layer under cohesive destruction |
|
Glagolev V.V., Markin A.A., Fursaev A.A. |
No 3 (2023) |
MACHINE LEARNING METHOD IN ELASTIC PLATE TOPOLOGY OPTIMIZATION PROBLEMS |
|
Avdonyushkin D.V., Matveeva A.I., Novokshenov A.D. |
No 4 (2020) |
Investigation of the Winkler foundation model applicability for describing the contact interaction of elastoplastic shells with a core under external pressure |
|
Bazhenov V.G., Nagornykh E.V., Samsonova D.A. |
No 1 (2019) |
The Effect of Preliminary Plastic Hardening by Tension on the Cylindrical Shells Buckling during Torsion |
|
Bazhenov V.G., Zhegalov D.V., Kazakov D.A., Kibec A.I., Nagornykh E.V., Samsonova D.A. |
No 4 (2016) |
Finite element investigation of the effectiveness of the tubular piezoelectric vibratory gyroscope depending on the type of polarization and boundary conditions |
|
Nasedkin A.V., Shprayzer E.I. |
No 2 (2018) |
Analysis of stress-strain state of dental implants by the boundary integral equations method |
|
Perelmuter M.N. |
No 3 (2022) |
Calculation of effective properties of geocomposites based on computed tomography images |
|
Artamonova N.B., Sheshenin S.V., Orlov E.A., Bichen Z., Frolova J.V., Khamidullin I.R. |
No 2 (2019) |
Modeling of Strands Formation in Elastomeric Composites |
|
Sokolov A.K., Garishin O.K., Svistkov A.L. |
No 3 (2013) |
O reshenii zadachi ravnovesiya myagkoy setchatoy obolochki pri nalichii nagruzki, sosredotochennoy v tochke |
|
Badriev I.B., Banderov V.V., Zadvornov O.A. |
No 4 (2016) |
Experimental and numerical research of the dynamic response of composite outlet guide vane for aircraft jet engine |
|
Grinev M.A., Anoshkin A.N., Pisarev P.V., Shipunov G.S., Nikhamkin M.S., Balakirev A.A., Konev I.P., Golovkin A.Y. |
No 1 (2024) |
STRESS-STRAIN STATE OF THIN-WALLED PIPE BLANKS DURING CRIMPING IN A CURVED AXISYMMETRIC MATRIX |
|
Andrianov I.K., Feoktistov S.I., Maryin S.B. |
No 4 (2021) |
Influence of the stress-strain state on the jerky flow effects and kinetics of the strain bands nucleation in Al-Mg alloy (A 95456) |
|
Tretyakova T.V., Tretyakov M.P., Lunegova E.M. |
No 4 (2018) |
Construction and analysis of finite-element models of inhomogeneous deformable solids based on scanning |
|
Pykhalov A.A., Duong V.L., Tolstikov V.G. |
No 2 (2015) |
Research of influence of barrier crest on polymer extrusion process |
|
Ershov S.V., Chernyaev V.V. |
No 4 (2017) |
ESTIMATION OF CRACK PROPAGATION DIRECTION ANGLE UNDER MIXED-MODE LOADING (MODE I AND MODE II): GENERALIZED FRACTURE MECHANICS CRITERIA AND ATOMISTIC MODELING (MOLECULAR DYNAMICS METHOD) |
|
Stepanova L.V., Bronnikov S.A., Belova O.N. |
No 3 (2020) |
About mixed forced, parametric and self-oscillations by limited excitation and delayed elasticity |
|
Alifov A.A. |
No 3 (2016) |
Normal and shear stresses estimation in deformed metals based on infrared thermography data |
|
Terekhina A.I., Kostina A.A., Plekhov O.A. |
No 2 (2018) |
Mechanics of collisions of solids: influence of friction and adhesion. I. Review of experimental and theoretical works |
|
Lyashenko I.A., Willert E., Popov V.L. |
No 3 (2014) |
MIXED-MODE LOADING OF THE CRACKED PLATE UNDER PLANE STRESS CONDITIONS |
|
Stepanova L.V., Yakovleva E.M. |
No 2 (2016) |
Manufacturing defects in composite flanges: modelling and analysis of influence on static strength |
|
Anoshkin A.N., Zuiko V.Y., Osokin V.M., Tretyakov A.A., Pisarev P.V. |
No 6 (2023) |
METHOD FOR CALCULATING SPHERICAL DOMES FOR STRENGTH AND BUCKLING |
|
Karpov V.V., Semenov A.A. |
No 4 (2018) |
Method for calculating acoustic stresses in six-beam diffraction in layered media |
|
Belyayev Y.N. |
No 2 (2015) |
Method of numerical calculation of optimal forms of bodies of revolution at movement in soil medium |
|
Bazhenov V.G., Kotov V.L., Linnik E.Y. |
No 3 (2017) |
The numerical model of dynamic mechanical behavior of brittle materials based on the concept of the kinetic theory of strength |
|
Grigoriev A.S., Shilko E.V., Skripnyak V.A., Chernyavsky A.G., Psakhie S.G. |
No 2 (2023) |
INFLUENCE OF SURFACE CHARGE ON THE FORMATION OF THE CARBONIZED LAYER RELIEF ON THE POLYMER SURFACE DURING ION-PLASMA TREATMENT |
|
Beliaev A.Y., Izyumov R.I., Svistkov A.L. |
No 1 (2020) |
Two methods for calculating the stress-strain state of shape memory alloy constructions taking into account tension-compression asymmetry |
|
Stolbova O.S., Tikhomirova K.A. |
No 1 (2014) |
Study of the stress state in composite plate near the connecting line edge depending on the thickness and material parameters of the connecting interlayer |
|
Pestrenin V.M., Pestrenina I.V., Landik L.V., Polyanina E.A. |
No 2 (2016) |
Theoretical-experimental study of mechanical behavior in 3D composites under quasi-steady damage |
|
Tsepennikov M.V., Strom A.A., Povyshev I.A., Smetannikov O.Y. |
No 3 (2022) |
Low-cycle fatigue of V-notched cylindrical samples of bronze alloy |
|
Abashev D.R. |
No 2 (2019) |
Mixed Form Equations for Ribbed Shells of a General Type And Their Solutions |
|
Karpov V.V. |
No 2 (2014) |
Optimization of parameters of layered plates during dynamic hard indenter penetration with friction and weakining effect of free surfaces |
|
Aptukov V.N., Khasanov A.R. |
No 3 (2016) |
Dynamics of partially saturated poroelastic solids by boundary-element method |
|
Igumnov L.A., Petrov A.N. |
No 6 (2023) |
METHOD OF ESTIMATING PLASTIC DEFORMATION DISTRIBUTIONS AT THE FATIGUE CRACK TIP BASED ON THE SOLUTION OF LINEAR ELASTICITY THEORY |
|
Vshivkov A.N., Iziumova A.Y., Panteleev I.A., Plekhov O.A. |
No 4 (2018) |
The methodical Aspects of Strength, Deformation and Energy characteristic Determination of Salt Rocks under Direct Tensile Loading of Rock Specimens in Laboratory Conditions |
|
Asanov V.A., Pankov I.L., Kuzminyh V.S., Morozov I.A. |
No 4 (2015) |
ITERATIVE FINITE ELEMENT ALGORITHM and its implementation for STRESS STATE of structural elements with singular points |
|
Pestrenin V.M., Pestrenina I.V., Landik L.V. |
No 3 (2017) |
Stability of toroidal shell segments at variation of a deflection angle |
|
Bakusov P.A., Semenov A.A. |
101 - 150 of 150 Items |
<< < 1 2 |