| Issue |
Title |
| No 3 (2016) |
Evaluation of service life of heat-resistant alloys under cyclic thermomechanical loading |
|
|
Volkov I.A., Igumnov L.A. |
| No 2 (2014) |
Investigation of influence of stress state parameters of fault zones on peculiarities of their mechanical response under shear loading |
|
|
Astafurov S.V., Shilko E.V., Psakhie S.G. |
| No 1 (2024) |
MODELING OF HIGH-RATE HARDENING OF A POLYMER COMPOSITE MATERIAL UNDER LOADING ALONG THE REINFORCEMENT DIRECTION |
|
|
Fedulov B.N., Konstantinov A.Y., Fedorenko A.N., Sergeichev I.V. |
| No 3 (2020) |
Limit states and safety factors under repeated loading |
|
|
Chernyavsky O.F., Chernyavsky A.O. |
| No 2 (2014) |
Features of low-temperature deformation and fracture of combined plastic pipes |
|
|
Anoshkin A.N., Pospelov A.B., Iakushev R.M. |
| No 6 (2023) |
ESTIMATION OF RESIDUAL STRESSES IN BIMETALLIC PLUNGER PUMP CYLINDERS AFTER THERMAL DEFORMATION |
|
|
Silina O.V., Ledon D.R., Babkin E.O., Bosyakov M.N. |
| No 4 (2016) |
The influence of fluid filtration on the strength of porous fluid-saturated brittle materials |
|
|
Dimaki A.V., Shilko E.V., Astafurov S.V., Psakhie S.G. |
| No 2 (2020) |
The Numerical study of the influence of a two-scale pore structure on the dynamic strength of water-saturated concrete |
|
|
Konovalenko I.S., Shilko E.V., Konovalenko I.S. |
| No 4 (2014) |
Influence of micro-arc oxidation modes on mechanical properties of aluminum alloy samples |
|
|
Dudareva N.Y., Butusov I.A., Kalschikov R.V. |
| No 6 (2023) |
METHOD FOR CALCULATING SPHERICAL DOMES FOR STRENGTH AND BUCKLING |
|
|
Karpov V.V., Semenov A.A. |
| No 3 (2016) |
Structural geometrical transitions under dynamic loading of materials |
|
|
Savenkov G.G., Kuznetsov A.V., Bragov A.M., Konstantinov A.Y., Lomunov A.K. |
| No 1 (2020) |
The Applied model of grinding a spherical solid particle with a direct impact on a non-deformable flat surface |
|
|
Guryanov G.A., Abdeev B.M. |
| No 4 (2014) |
Coupled model of fluid-saturated porous materials based on a combination of discrete and continuum approaches |
|
|
Dimaki A.V., Shilko E.V., Astafurov S.V., Korostelev S.Y., Psakhie S.G. |
| No 4 (2023) |
APPLICATION OF THE FINITE ELEMENT METHOD IN COMBINATION WITH THE CONTACT LAYER METHOD TO DETERMINE THE STRESS-STRAIN STATE OF MULTILAYER BEAMS |
|
|
Chepurnenko A.S., Turina V.S. |
| No 2 (2016) |
Manufacturing defects in composite flanges: modelling and analysis of influence on static strength |
|
|
Anoshkin A.N., Zuiko V.Y., Osokin V.M., Tretyakov A.A., Pisarev P.V. |
| No 4 (2018) |
Generalized dynamic theory of a solid particle grinding by pulse-force compression with two non-deformable balls |
|
|
Abdeev B.M., Baigereyev S.R., Guryanov G.A. |
| No 4 (2014) |
Technologies and problems of composite materials mechanics for production of outlet guide vane for aircraft jet engine |
|
|
Anoshkin A.N., Zuiko V.Y., Shipunov G.S., Tretyakov A.A. |
| No 4 (2022) |
EVALUATION OF THE THERMAL AND MOISTURE AGING INFLUENCE IN AGGRESSIVE ENVIRONMENTS ON THE CHANGE IN THE OF THE MECHANICAL BEHAVIOR OF FIBERGLASS BY A SHORT BEAM BENDING TESTS BASED ON ACOUSTIC EMISSION TECHNIQUE |
|
|
Lobanov D.S., Lunegova E.M. |
| No 4 (2016) |
Anisotropy of material fatigue properties and its effect on durability of structural elements |
|
|
Burago N.G., Nikitin I.S., Yushkovsky P.A., Yakushev V.L. |
| No 4 (2018) |
The methodical Aspects of Strength, Deformation and Energy characteristic Determination of Salt Rocks under Direct Tensile Loading of Rock Specimens in Laboratory Conditions |
|
|
Asanov V.A., Pankov I.L., Kuzminyh V.S., Morozov I.A. |
| No 4 (2015) |
Stress-strain analysis and strength prediction of composite outlet guide vane for aircraft jet engine |
|
|
Grinev M.A., Anoshkin A.N., Pisarev P.V., Zuiko V.Y., Shipunov G.S. |
| No 3 (2022) |
Study of deformation structures maps in metals under tension |
|
|
Barannikova S.A., Iskhakova P.V. |
| No 1 (2017) |
The possibilities and limitations of the homogenized description of inelastic behavior of brittle porous materials under constrained conditions |
|
|
Astafurov S.V., Shilko E.V., Psakhie S.G. |
| No 4 (2018) |
THE STRESS-STRAIN STATE AND DURATION UNTIL FRACTURE OF ROTATING DISKS IN CREEP |
|
|
Banshchikova I.A. |
| No 3 (2015) |
CAD/CAE modelling of mechanical behavior of composite outlet guide vane for aircraft jet engine |
|
|
Grinev M.A., Anoshkin A.N., Pisarev P.V., Zuiko V.Y., Shipunov G.S. |
| No 1 (2022) |
Calculation of VAT and assessment of the strength of a segmented cylindrical shell made of composite materials with metal inserts |
|
|
Rogozhnikova E.N., Anoshkin A.N., Bulbovich R.V. |
| No 1 (2017) |
Numerical and experimental study of composite bulkhead partition strength with in-situ x-ray monitoring |
|
|
Potrahov N.N., Anoshkin A.N., Zuiko V.Y., Osokin V.M., Pisarev P.V., Pelenev K.A. |
| No 1 (2019) |
Comprehensive analysis of mechanical behavior and fracture processes of specimens of three-dimensional reinforced carbon fiber in tensile tests |
|
|
Tretyakova T.V., Dushko A.N., Strungar E.M., Zubova E.M., Lobanov D.S. |
| No 4 (2015) |
Experimental investigation and numerical modeling of elastic properties and strength of porous ceramics |
|
|
Ignatova A.V., Kudryavtsev O.A., Sapozhnikov S.B. |
| No 4 (2021) |
© ПНИПУ Numerical and experimental research of the evaluation of the mechanical behavior of carbon fiber reinforced polymerspecimens with an embedded Smart-layer |
|
|
Baranov M.A., Nikiforov A.S., Mikryukov A.O., Ermakov D.A. |
| No 1 (2018) |
Applied grinding model of a solid particle with a simple shape on impact with a hard surface |
|
|
Guryanov G.A., Abdeev B.M., Klimenko Y.A. |
| No 1 (2019) |
Investigation of the behavior of cylindrical bodies under conditions of joint tension and torsion under disproportionate loading |
|
|
Kryukov A.A. |
| No 3 (2015) |
Mathematical modeling of development of beyond design basis accident in integral fast-neuron reactors vessel |
|
|
Bazhenov V.G., Zhestkov M.N., Zamyatin V.A., Kibets A.I. |
| No 3 (2021) |
The Applied mechanical and mathematical model of grinding of a solid particle by static crushing |
|
|
Guryanov G.A., Abdeev B.M., Baigereyev S.R., Kim V.A., Suleimenov A.D. |
| No 2 (2018) |
Experimental and FEM short-term tensile strength assessment of U- and sharp V-notched specimens made of ductile material |
|
|
Sapozhnikov S.B., Leshkov E.V., Ivanov M.A., Yaroslavtsev S.I., Shcherbakov I.A. |
| No 1 (2019) |
Experimental study of postcritical deformation and failure of steels at high temperature |
|
|
Wildemann V.E., Tretyakov M.P. |
| No 4 (2015) |
Formation of divergent testing efforts and experimental evaluation of material strength under biaxial stretching |
|
|
Zenkov E.V., Tsvik L.B. |
| No 4 (2020) |
Study Smart-layer effect on the physical and mechanical characteristics of the samples from polymer composite materials under quasi-static loading |
|
|
Shipunov G.S., Baranov M.A., Nikiforov A.S., Golovin D.V., Tihonova A.A. |
| No 2 (2014) |
Mathematical modelling of deformation and damage accumulation under cyclic loading |
|
|
Bondar V.S., Danshin V.V., Makarov D.A. |
| No 2 (2024) |
INFLUENCE OF ADDITIVE MANUFACTURING TECHNOLOGY OF TOPOLOGICALLY OPTIMIZED PRODUCTS FROM PHOTOPOLYMER RESINS ON THE ANISOTROPY OF THEIR MECHANICAL PROPERTIES |
|
|
Ezhov A.D., Kotovich I.V., Kiselev V.P. |
| No 4 (2015) |
Ballistic damages of GFRP and their repairs using ultrasound matrix impregnation |
|
|
Zhikharev M.V., Sapozhnikov S.B. |
| No 4 (2020) |
On the specifics of behavior of the sandwich plate composite facing layers under local loading |
|
|
Paimushin V.N., Kayumov R.A., Shakirzyanov F.R., Kholmogorov S.A. |
| 1 - 42 of 42 Items |
|
