Issue	Title
No 1 (2024)	VARIATIONAL-DIFFERENCE SOLUTION OF DEFORMATION AND BUCKLING PROBLEMS OF ELASTOPLASTIC SHELLS OF REVOLUTION WITH ELASTIC FILLER UNDER COMBINED QUASI-STATIC AND DYNAMIC AXISYMMETRIC LOADINGS	Abstract (Rus)
Bazhenov V.G., Kalinina Y.A., Nagornykh E.V., Samsonova D.A.
No 5 (2023)	CRYSTAL PLASTICITY FINITE-ELEMENT SIMULATIONS FOR QUASISTATIC DEFORMATION OF POLYCRYSTALS IN TERMS OF EXPLICIT DYNAMICS	Abstract (Rus)
Romanova V.A., Balokhonov R..., Borodina A., Shakhidzhanov V.S., Lychagin D.V., Emelianova E.S., Pisarev M.
No 5 (2023)	THE INFLUENCE OF THE STRUCTURAL ORGANIZATION OF CHIRAL METAMATERIALS ON THEIR PHYSICAL AND MECHANICAL CHARACTERISTICS	Abstract (Rus)
Akhmetshin L.R., Smolin I.Y.
No 4 (2023)	ESTIMATING PARAMETERS OF PERMISSIBLE DEFECTS IN STRUCTURAL FIBERGLASS BASED ON THEORY OF CRITICAL DISTANCES	Abstract (Rus)
Mullahmetov M.N., Lobanov D.S., Melnikova V.A., Yankin A.S.
No 4 (2019)	Non-stationary coupled axisymmetric thermoelasticity problem for a rigidly fixed round plate	Abstract (Rus)
Shlyakhin D.A., Dauletmuratova Z.M.
No 1 (2017)	Numerical investigation of a physically nonlinear problem of the longitudinal bending of the sandwich plate with a transversal-soft core	Abstract (Rus)
Badriev I.B., Makarov M.V., Paimushin V.N.
No 2 (2019)	Description of the Effect of AlMg6 Alloy Strength Decrease during Temperature Increase under Dynamic Loading	Abstract (Rus)
Bilalov D.A., Sokovikov M.A., Bayandin Y.V., Chudinov V.V., Oborin V.A., Naimark O.B.
No 4 (2023)	ANALYSIS OF METHODS FOR CONSTRUCTING TRUE DEFORMATION DIAGRAMS OF ELASTOPLASTIC MATERIALS UNDER LARGE DEFORMATIONS	Abstract (Rus)
Bazhenov V.G., Kazakov D.A., Kukanov S.S., Osetrov D.L., Ryabov A.A.
No 2 (2022)	Analysis of the limiting states of cylindrical elastic-plastic shells under tension and combined loading by internal pressure and tension	Abstract (Rus)
Bazhenov V.G., Kazakov D.A., Osetrov S.L., Osetrov D.L., Ryabov A.A.
No 4 (2019)	Numerical modeling of nonlinear dynamic and static compression of the metal mesh	Abstract (Rus)
Kochetkov A.V., Modin I.A., Leontev N.V., Turigina I.A., Poverennov E.Y.
No 4 (2018)	Determination of elastic and dissipative properties of concrete under dynamic deformation	Abstract (Rus)
Shardakov I.N., Shestakov A.P., Glot I.O.
No 1 (2021)	Effectiveness of 2-D and 3-D modelling of dovetail joint of composite fan blade for choosing rational reinforcement schemes	Abstract (Rus)
Guseinov K., Kudryavtsev O.A., Sapozhnikov S.B.
No 2 (2023)	INFLUENCE OF SURFACE CHARGE ON THE FORMATION OF THE CARBONIZED LAYER RELIEF ON THE POLYMER SURFACE DURING ION-PLASMA TREATMENT	Abstract (Rus)
Beliaev A.Y., Izyumov R.I., Svistkov A.L.
No 4 (2019)	Analysis of models for porosity evolution in reservoir during steam injection	Abstract (Rus)
Kostina A.A., Zhelnin M.S., Plekhov O.A.
No 1 (2022)	Mathematical model of oxide film deformation on the surface of a metallic melt in an alternating magnetic field	Abstract (Rus)
Nikulin I.L., Demin V.A.
No 4 (2018)	Dynamic deformation interaction of elements of the “drummer-gasket-reinforced concrete beam” system	Abstract (Rus)
Sobyanin K.V., Shardakov I.N., Shestakov A.P., Glot I.O.
No 4 (2020)	Numerical simulation of deformation and fracture of metal-matrix composites with considering residual stresses	Abstract (Rus)
Zemlianov A.V., Evtushenko E.P., Balokhonov R.R.
No 1 (2023)	PROGRAMMABLE BEHAVIOR OF THE METAMATERIAL BY KINDS OF UNIT CELLS CONNECTION	Abstract (Rus)
Akhmetshin L.R., Smolin I.Y.
No 4 (2019)	Creation and verification of computational models for analysis of the mechanical behaviour of jet engines composite components under high-velocity impact: main problems and basic recommendations	Abstract (Rus)
Kudryavtsev O.A., Zhikharev M.V., Olivenko N.A.
No 3 (2017)	Processing fine magnesium materials. Numerical simulation and experimental analyses	Abstract (Rus)
Aptukov V.N., Romanov P.V., Skryabina N.E., Fruchart D.
No 4 (2018)	The Experimental and Theoretical Study of Large Deformations of Cylindrical Samples from Steel 09G2S with Stress Concentrators under Tension-Torsion Loading to Failure	Abstract (Rus)
Bazhenov V.G., Kazakov D.A., Nagornykh E.V., Osetrov D.L., Ryabov A.A.
No 3 (2015)	CAD/CAE modelling of mechanical behavior of composite outlet guide vane for aircraft jet engine	Abstract (Rus)
Grinev M.A., Anoshkin A.N., Pisarev P.V., Zuiko V.Y., Shipunov G.S.
No 4 (2019)	Experimental and theoretical study of mechanical deformation of freezing saturated soil	Abstract (Rus)
Zhelnin M.S., Prokhorov A.E., Kostina A.A., Plekhov O.A.
No 3 (2019)	Simulation of residual stresses during pulsed thermo-force surface hardening	Abstract (Rus)
Bagmutov V.P., Denisevich D.S., Zakharov I.N., Romanenko M.D., Fastov S.A.
No 1 (2019)	The Effect of Preliminary Plastic Hardening by Tension on the Cylindrical Shells Buckling during Torsion	Abstract (Rus)
Bazhenov V.G., Zhegalov D.V., Kazakov D.A., Kibec A.I., Nagornykh E.V., Samsonova D.A.
No 6 (2023)	NUMERICAL SIMULATION OF THE INTERACTION BETWEEN A WAVE IN HYDROGEN AND A BARRIER IN A MODEL CHANNEL	Abstract (Rus)
Seregina M.A., Babushkina A.V., Modorskii V.Y., Cherepanov I.E., Mikryukov A.O.
No 3 (2020)	Diagnostics of impregnation defects of reinforcing filaments of polymer composite with built-in fibre-optic sensor with distributed Bragg grating	Abstract (Rus)
Pan’kov A.A.
No 3 (2019)	Stability of chemical reaction fronts in the vicinity of a blocking state	Abstract (Rus)
Morozov A.V., Freidin A.B., Müller W.H.
No 1 (2013)	Very-high-cycle fatigue facture of titanium compressor disks	Abstract (Rus)
Burago N.G., Zhuravlev A.B., Nikitin I.S.
No 2 (2016)	Manufacturing defects in composite flanges: modelling and analysis of influence on static strength	Abstract (Rus)
Anoshkin A.N., Zuiko V.Y., Osokin V.M., Tretyakov A.A., Pisarev P.V.
No 3 (2019)	Simulation of Metal Powder Bidirectional Compression in a Pressing Tool with a Floating Die	Abstract (Rus)
Berezin I.M., Zalazinskii A.G., Nesterenko A.V., Bykova T.M.
No 2 (2020)	Investigation of the mechanical behavior of a two-phase Mg-Ni compound during fast compression	Abstract (Rus)
Aptukov V.N., Skryabina N.E., Fruchart D.
No 3 (2016)	Computational and experimental research of the contact debonding process when rigid reinforcement is pressed into concrete	Abstract (Rus)
Kashevarova G.G., Martirosyan A.S., Travush V.I.
No 3 (2022)	Formulation and Numerical Solution of the Stability Loss Problem of Elastic-Plastic Shells of Revolution with an Elastic Filler under Combined Axisymmetric and Torsional Loadings	Abstract (Rus)
Bazhenov V.G., Kazakov D.A., Kibec A.I., Nagornykh E.V., Samsonova D.A.
No 2 (2021)	Modeling the Mechanical Response of Auxetic Metamaterials to Dynamic Effects	Abstract (Rus)
Skripnyak V.V., Chirkov M.O., Skripnyak V.A.
No 2 (2014)	Seasonal changes in eigenfrequencies of structures supported on pile foundations	Abstract (Rus)
Korepanov V.V., Tsvetkov R.V.
No 3 (2024)	NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF DYNAMIC DEFORMATION AND FAILURE ON IMPACT OF RECTANGULAR PLATES	Abstract (Rus)
Bazhenov V.G., Ryabov A.A., Kukanov S.S., Ptitsyn S.O.
1 - 37 of 37 Items

Search tips:

• Search terms are case-insensitive
• Common words are ignored
• By default only articles containing all terms in the query are returned (i.e., AND is implied)
• Combine multiple words with OR to find articles containing either term; e.g., education OR research
• Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
• Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
• Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
• Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"