| Issue |
Title |
| No 1 (2023) |
METHODS FOR REDUCING NOTCH SENSITIVITY OF HYBRID PSEUDO-DUCTILE POLYMER COMPOSITES WITH FABRIC REINFORCEMENT: EXPERIMENTAL STUDY |
|
|
Leshkov E.V., Olivenko N.A., Kudryavtsev O.A., Sapozhnikov S.B. |
| No 4 (2014) |
Technologies and problems of composite materials mechanics for production of outlet guide vane for aircraft jet engine |
|
|
Anoshkin A.N., Zuiko V.Y., Shipunov G.S., Tretyakov A.A. |
| No 5 (2023) |
THE PHYSICAL AND MECHANICAL MODEL OF ELECTROCHEMICAL PROCESSES OF FORMING COPPER AND ELECTROСORUNDUM MICRO- AND NANOCOMPOSITE COATINGS |
|
|
Molchanov E.K., Vakhrushev A.V. |
| No 4 (2022) |
ELECTROMAGNETIC COUPLING OF PIEZOELECTRIC/FERRITE COMPOSITE WITH INITIAL STRESS STATE |
|
|
Pan’kov A.A. |
| No 5 (2023) |
GRADIENT MODELS OF DEFORMATION OF COMPOSITE ELECTROELASTIC BODIES |
|
|
Vatulyan А.О., Nesterov S.А. |
| No 4 (2018) |
Numerical simulation for development of methodology of stress-strain state control of composite bulkhead for aviation application with the usage of FBG sensors |
|
|
Anoshkin A.N., Zuiko V.Y., Pelenev K.A., Pisarev P.V., Shipunov G.S. |
| No 4 (2015) |
Stress-strain analysis and strength prediction of composite outlet guide vane for aircraft jet engine |
|
|
Grinev M.A., Anoshkin A.N., Pisarev P.V., Zuiko V.Y., Shipunov G.S. |
| No 3 (2015) |
CAD/CAE modelling of mechanical behavior of composite outlet guide vane for aircraft jet engine |
|
|
Grinev M.A., Anoshkin A.N., Pisarev P.V., Zuiko V.Y., Shipunov G.S. |
| No 1 (2017) |
Numerical and experimental study of composite bulkhead partition strength with in-situ x-ray monitoring |
|
|
Potrahov N.N., Anoshkin A.N., Zuiko V.Y., Osokin V.M., Pisarev P.V., Pelenev K.A. |
| No 3 (2023) |
NUMERICAL AND EXPERIMENTAL STUDY ON CFRP STRUCTURE OPTIMIZATION FOR COEFFICIENT OF THERMAL EXPANSION |
|
|
Pasechnik K.A., Obvertkin I.V., Vlasov A.Y. |
| No 1 (2023) |
REPRESENTATIVE VOLUME AND EFFECTIVE MATERIAL CHARACTERISTICS OF PERIODIC AND STATISTICALLY UNIFORMLY REINFORCED FIBER COMPOSITES |
|
|
Pestrenin V.M., Pestrenina I.V., Landik L.V., Fagalov A.R., Pelevin A.G. |
| No 2 (2021) |
A Comparison of Experimental and Computation Results of Finding Effective Characteristics of Elastic Properties of Polymer Layered Composites from Carbon and Glass Fabrics |
|
|
Muyzemnek A.Y., Ivanova T.N., Kartashova E.D. |
| No 4 (2016) |
Experimental and numerical research of the dynamic response of composite outlet guide vane for aircraft jet engine |
|
|
Grinev M.A., Anoshkin A.N., Pisarev P.V., Shipunov G.S., Nikhamkin M.S., Balakirev A.A., Konev I.P., Golovkin A.Y. |
| No 4 (2018) |
Experimental Study of Short-Term Transient Creep of the Al/SiC Metal-Matrix Composite under Uniaxial Compression |
|
|
Smirnov S.V., Kryuchkov D.I., Nesterenko A.V., Berezin I.M., Vichuzhanin D.I. |
| No 1 (2015) |
A two-level method for calculation of microstress on reinforced plates with circular hole in case of extension normal to principal direction |
|
|
Darya zadeh S., Lvov G.I. |
| No 1 (2021) |
Effectiveness of 2-D and 3-D modelling of dovetail joint of composite fan blade for choosing rational reinforcement schemes |
|
|
Guseinov K., Kudryavtsev O.A., Sapozhnikov S.B. |
| No 2 (2016) |
Manufacturing defects in composite flanges: modelling and analysis of influence on static strength |
|
|
Anoshkin A.N., Zuiko V.Y., Osokin V.M., Tretyakov A.A., Pisarev P.V. |
| No 3 (2022) |
Development of the digital image correlation (DIC) method for mechanical testing at elevated temperatures |
|
|
Strungar E.M., Lobanov D.S. |
| No 4 (2020) |
Study Smart-layer effect on the physical and mechanical characteristics of the samples from polymer composite materials under quasi-static loading |
|
|
Shipunov G.S., Baranov M.A., Nikiforov A.S., Golovin D.V., Tihonova A.A. |
| No 3 (2016) |
Yarn-level modelling of woven and unidirectional thermoplastic composite materials under ballistic impact |
|
|
Kudryavtsev O.A., Sapozhnikov S.B. |
| No 4 (2023) |
ESTIMATING PARAMETERS OF PERMISSIBLE DEFECTS IN STRUCTURAL FIBERGLASS BASED ON THEORY OF CRITICAL DISTANCES |
|
|
Mullahmetov M.N., Lobanov D.S., Melnikova V.A., Yankin A.S. |
| No 3 (2018) |
A fracture locus for a 2 wt% aluminum-graphene metal matrix composite at 300 °C |
|
|
Vichuzhanin D.I., Yolshina L.A., Smirnov A.S., Muradymov R.V. |
| No 3 (2022) |
Effect of mechanical load on resultant composite piezomodules |
|
|
Pan’kov A.A. |
| No 4 (2020) |
Investigation of damage accumulation and delamination propagation in polymer composite materials based on two-level fracture models |
|
|
Dolgikh D.A., Tashkinov M.A. |
| No 4 (2016) |
Numerical analysis of dynamic strength of composite cylindrical shells under multiple-pulse exposures |
|
|
Abrosimov N.A., Elesin A.V. |
| No 4 (2023) |
MODELING OF AXIAL COMPRESSION OF V95/10% SIC ALUMINUM MATRIX COMPOSITE UNDER NON-STATIONARY THERMOMECHANICAL CONDITIONS |
|
|
Kryuchkov D.I., Nesterenko A.V., Zalazinsky A.G. |
| No 1 (2019) |
The Research of the Mechanical Behavior of Elastically Transformable Composite Structures |
|
|
Khaliulin V.I., Batrakov V.V., Shabalin L.P., Kiauka M.Y., Bezzametnov O.N. |
| No 2 (2022) |
Solution of the plane problem of the theory of elasticity on bending of an articulated fixed multilayer panel with a circular axis |
|
|
Bukaty S.A., Osadchy N.V. |
| No 4 (2015) |
Experimental investigation of defects influence on composites sandwich panels strength using digital image correlation and infrared thermography methods |
|
|
Lobanov D.S., Wildemann V.E., Spaskova E.M., Chikhachev A.I. |
| No 4 (2020) |
Numerical analysis of the spherical bearing geometric configuration with antifriction layer made of different materials |
|
|
Adamov A.A., Kamenskih A.A., Pankova A.P. |
| No 3 (2023) |
REGULARITIES OF FATIGUE FAILURE TYPICAL COMPOSITE FLANGE |
|
|
Solomonov D.G., Sazhenkov N.A., Konev I.P., Toropicina A.V., Nikhamkin M.S. |
| No 1 (2019) |
Comprehensive analysis of mechanical behavior and fracture processes of specimens of three-dimensional reinforced carbon fiber in tensile tests |
|
|
Tretyakova T.V., Dushko A.N., Strungar E.M., Zubova E.M., Lobanov D.S. |
| No 1 (2022) |
Calculation of VAT and assessment of the strength of a segmented cylindrical shell made of composite materials with metal inserts |
|
|
Rogozhnikova E.N., Anoshkin A.N., Bulbovich R.V. |
| No 4 (2016) |
A new algorithm for generating a random packing of ellipsoidal inclusions to construct composite microstructure |
|
|
Shubin S.N., Freidin A.B. |
| No 3 (2020) |
Structural failure criterion for spatially-reinforced carbon-carbon composite materials |
|
|
Magnitsky I.V. |
| No 1 (2017) |
Experimental studies of the high temperature influence on strength and deformation properties of combined glass organoplastics |
|
|
Lobanov D.S., Babushkin A.V. |
| No 1 (2019) |
Evaluation of the Damage Degree to Carbon-Fiber Composite Materials under Impact |
|
|
Staroverov O.A., Babushkin A.V., Gorbunov S.M. |
| No 4 (2021) |
Composite materials in aircraft engine blades |
|
|
Khayrnasov K.Z. |
| No 1 (2016) |
Fractal analysis of deformation curves of fiber-reinforced fine-grained concretes under compression |
|
|
Selyaev V.P., Nizina T.A., Balykov A.S., Nizin D.R., Balbalin A.V. |
| No 3 (2024) |
MULTIPARAMETRIC OPTIMIZATION OF THE ROTOR BLADE DESIGN OF A HELICOPTER WITH CONTROLLED GEOMETRY |
|
|
Anoshkin A.N., Pisarev P.V., Nureeva E.G., Bayandin S.R. |
| No 2 (2020) |
Numerical Modeling of Electroelastic Fields in the Surface Piezoelectric Luminescent Optical Fiber Sensor to Diagnose Deformation of Composite Plates |
|
|
Pan’kov A.A., Pisarev P.V. |
| No 1 (2017) |
Strength computational and experimental analysis of turbojet fan case under the impact of a torn blade |
|
|
Kurteyev V.A., Burdyugov S.I., Inozemtsev A.A., Lomaev V.I., Mozerov B.G., Sokolovskiy M.I., Shatrov V.B. |
| No 3 (2023) |
BASE NEUTRAL SURFASE SELECTION FOR OPTIMAL DESIGN OF STRUCTURALLY-ANISOTROPIC AIRCRAFT PANELS MADE FROM COMPOSITE MATERIALS WITH REFINED BUCKLING THEORY RESTRICTIONS |
|
|
Gavva L.M., Mitrofanov O.V., Firsanov V.V. |
| No 1 (2014) |
Study of the stress state in composite plate near the connecting line edge depending on the thickness and material parameters of the connecting interlayer |
|
|
Pestrenin V.M., Pestrenina I.V., Landik L.V., Polyanina E.A. |
| No 3 (2021) |
Frequency characteristics of built-in fiber-optic PEL-sensor to diagnose complex harmonic deformations within the polymer composite structure |
|
|
Pan’kov A.A., Pisarev P.V. |
| No 4 (2016) |
Packaging and deployment of large shell structures by internal pressure loading |
|
|
Pestrenin V.M., Pestrenina I.V., Rusakov S.V., Kondyurin A.V., Korepanova A.V. |
| No 1 (2024) |
MODELING OF HIGH-RATE HARDENING OF A POLYMER COMPOSITE MATERIAL UNDER LOADING ALONG THE REINFORCEMENT DIRECTION |
|
|
Fedulov B.N., Konstantinov A.Y., Fedorenko A.N., Sergeichev I.V. |
| No 4 (2019) |
Numerical study of the influence of gaps between tiles and backing type on overall high-velocity impact performance of a ceramic-faced protective structure |
|
|
Kudryavtsev O.A., Sapozhnikov S.B., Zhikharev M.V. |
| No 2 (2017) |
Modelling the generation of new material surfaces in a composite with an adhesion layer under cohesive destruction |
|
|
Glagolev V.V., Markin A.A., Fursaev A.A. |
| No 1 (2023) |
MODELING OF 3D-PRINTING PROCESSES FOR COMPOSITE TOOLING AND TRANSFER MOLDING OF GRID STRUCTURES |
|
|
Shabalin L.P., Puzyretskiy E.A., Khaliulin V.I., Batrakov V.V. |
| No 1 (2013) |
Simulation of the stress-strain state of thin composite coatings based on solutions of the plane problem of strain-gradient elasticity for a layer |
|
|
Lurie S.A., Solyaev Y.O., Rabinsky L.N., Kondratova Y.N., Volov M.I. |
| No 3 (2021) |
Simulation of impact failure of tubular samples made of composite material, depending on the loading rate |
|
|
Fedorenko A.N., Fedulov B.N., Lomakin E.V. |
| No 2 (2016) |
Theoretical-experimental study of mechanical behavior in 3D composites under quasi-steady damage |
|
|
Tsepennikov M.V., Strom A.A., Povyshev I.A., Smetannikov O.Y. |
| No 6 (2023) |
LOCAL DAMAGES IN THE HIP JOINT ENDOPROSTHESIS FROM THE С/С COMPOSITE DURING OVERLOADS |
|
|
Razumovskii E.S., Shavshukov V.E. |
| No 3 (2019) |
About Electrical Conductivity of the Epoxy Matrix with Carbon Nanotubes |
|
|
Semenov V.A., Rusakov S.V., Gilev V.G. |
| No 3 (2017) |
ANSYS numerical modeling of electroelastic fields in the piezoelectro luminescent fiber-optical sensor diagnosing the composite volume deformed state |
|
|
Pan’kov A.A., Pisarev P.V. |
| No 3 (2014) |
IDENTIFICATION METHOD OF GRADIENT MODELS PARAMETERS OF INHOMOGENEOUS STRUCTURES BASED ON DISCRETE ATOMISTIC SIMULATIONS |
|
|
Lurie S.A., Solyaev Y.O. |
| No 2 (2021) |
Modeling the Effective Conductive Properties of Polymer Nanocomposites with a Random Arrangement of Graphene Oxide Particles |
|
|
Tashkinov M.A., Dobrydneva A.D., Matveenko V.P., Silberschmidt V.V. |
| No 3 (2016) |
A numerical study of stress-strain state evolution in structurally inhomogeneous materials subjected to uniaxial loading |
|
|
Smirnov S.V., Konovalov A.V., Myasnikova M.V., Khalevitsky Y.V., Smirnov A.S. |
| No 6 (2023) |
X-RAY COMPUTED TOMOGRAPHY CHARACTERIZATION OF 3D-PRINTED ACRYLONITRILE BUTADIENE STYRENE AND POLYETHERETHERKETONE COMPOSITES SUBJECTED TO LASER SHOCK PEENING |
|
|
Mubassarova V.A., Panteleev I.A., Plekhov O.A., Iziumova A.Y., Vshivkov A.N., Vindokurov I.V., Tashkinov M.A. |
| No 3 (2019) |
The Analysis of residual stresses in layered composites with [0°/90°] layup |
|
|
Bondarchuk D.A., Fedulov B.N., Fedorenko A.N., Lomakin E.V. |
| No 1 (2018) |
Modelling the formation of new material surfaces during adhesive delamination of a composite |
|
|
Glagolev V.V., Markin A.A., Fursaev A.A. |
| No 1 (2023) |
SPECTRAL DYNAMIC STIFFNESS METHOD FOR THE FLUTTER PROBLEM OF COMBINED PLATES |
|
|
Papkov S.O., Papkova Y.I., Pasechnik V.A. |
| No 4 (2014) |
Characterization of low velocity local impact of sandwich panels |
|
|
Dolganina N.Y., Sapozhnikov S.B. |
| No 2 (2021) |
On the Theory of Elasticity of Microinhomogeneous Media with Account for Stochastic Changes in the Connectivity of Constituent Components |
|
|
Saraev L.A. |
| No 2 (2016) |
Separation process modeling of composite with adhesive layer |
|
|
Glagolev V.V., Markin A.A., Fursaev A.A. |
| No 6 (2023) |
FATIGUE SENSITIVITY OF GFRP UNDER PROPORTIONAL CYCLIC TENSION WITH TORSION |
|
|
Wildemann V.E., Staroverov O.A., Mugatarov A.I., Kuchukov A.M. |
| No 4 (2018) |
Shaped and branched analogs of triangle multi-leaf spring |
|
|
Polilov A.N., Tatus N.A., Tian X. |
| No 1 (2018) |
ESTIMATION OF THE CYLINDRICAL COMPOSITE SHELL STIFFNESS AT THE INITIAL STAGE OF CURING DURING DEPLOYMENT BY INTERNAL PRESSURE |
|
|
Gilev V.G., Rusakov S.V., Pestrenin V.M., Pestrenin I.V. |
| 1 - 69 of 69 Items |
|
