| Issue |
Title |
| Vol 23, No 3 (2021) |
Increasing the rectangularity of the loop of magnetic hysteresis of magnetic hysteresis based on the Fe-Cr-Co system due to the alloying Sm |
|
|
Marieva M.A., Kozvonin V.A., Shatsov A.A. |
| Vol 19, No 4 (2017) |
Corrosion Resistance of Steels and Alloys in Fluoride Salts |
|
|
D'yachenko A.N., Kraydenko R.I., Kurchenko E.I. |
| Vol 22, No 1 (2020) |
Metallographic investigations of welded Joints of aluminium alloy of Al-Mg-Li System, subjected to Thermal Vacuum treatment |
|
|
Fedoseeva E.M., Olshanskaya T.V., Prokhorov P.V. |
| Vol 22, No 1 (2020) |
Development of recommendations to improve the melting of the melchior alloy mark MN19 |
|
|
Kochetkova Y.A., Tsepelev V.S., Vyukhin V.V., Konashkov V.V., Povodator A.M. |
| Vol 20, No 3 (2018) |
The using of resistometry to study the kinetics of atomic ordering in an Cu-80 wt. % Au alloy |
|
|
Generalova K.N., Glukhov A.V., Volkov A.Y. |
| Vol 23, No 2 (2021) |
Influence of tallium on the kinetics of oxidation of aluminum alloy AMg2 in the solid state |
|
|
Ganiev I.N., Zokirov F.S., Sharipova H.Y., Ibrokhimov N.F. |
| Vol 17, No 4 (2015) |
Influence of welding parameters on changes in the chemical composition of the welded joints in electron beam welding, electron beam with oscillation |
|
|
Salomatova E.S., Ol'shanskaia T.V., Trushnikov D.N., Belenkii V.I., Mladenov G.M. |
| Vol 18, No 1 (2016) |
Structure and phase composition of Ti-Nb alloy produced by the method of selective laser melting |
|
|
Kovalevskaia Z.G., Khimich M.A., Sharkeev I.P., Babakova E.V. |
| Vol 21, No 3 (2019) |
DETERMINATION OF CRITICAL TEMPERATURES AC1 AND AC3 IN STEELS ALLOYING SYSTEM H2G2S2MF USING THE DILATOMETRIC METHOD AND THE METHOD OF TESTING QUENCHING |
|
|
Iurchenko A.N., Marieva M.A., Grebenkin R.D., Simonov I.N. |
| Vol 23, No 3 (2021) |
INTENSIVE PLASTIC DEFORMATION of NON-STOCHIOMETRIC Ni-Mn-In HEUSLER ALLOY |
|
|
Kaletina Y.V., Kaletin A.Y., Pilyugin V.P. |
| Vol 18, No 3 (2016) |
Microstructure and dynamic loading resistance of layered steel/Al-composite produced by rolling |
|
|
Gladkovsky S.V., Kuteneva S.V., Veselova V.E., Kokovikhin E.A. |
| Vol 21, No 3 (2019) |
PREDICTION OF THE QUALITY OF THE PROCESSED SURFACE OF PRODUCTS MADE OF TITANIUM ALLOYS AFTER ELECTRO-EROSIVE TREATMENT |
|
|
Shlykov E.S., Abliaz T.R., Osinnikov I.V., Khabarova A.V., Omelin A.A. |
| Vol 19, No 3 (2017) |
The equilibrium of the system gas-liquid for alloy Pb-Sb in vacuum distillation |
|
|
Korolev A.A., Krayukhin S.A., Maltsev G.I. |
| Vol 21, No 4 (2019) |
THE INFLUENCE OF DEFORMATION STABILITY OF β-PHASE IN TITANIUM ALLOY BT23 ON THE PHASE COMPOSITION, MICROSTRUCTURE AND MECHANICAL PROPERTIES AFTER TENSION TEST AND IMPACT TEST |
|
|
Gladkovsky S.V., Veselova V.E., Patselov A.M., Khotinov V.A. |
| Vol 16, No 1 (2014) |
Features micro-arc oxidation process of the aluminum alloy D16 |
|
|
Ponomarev I.S., Krivonosova E.A., Gorchakov A.I. |
| Vol 23, No 4 (2021) |
INFLUENCE OF HEAT TREATMENT MODES ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE METASTABLE TITANIUM ALLOY VT23 |
|
|
Veselova V.E., Gladkovsky S.V., Kovalev N.I. |
| Vol 16, No 2 (2014) |
Effect of electrical current on the aluminum alloy D16 with a surface micro-arc oxidation coating |
|
|
Ponomarev I.S., Krivonosova E.A. |
| Vol 24, No 1 (2022) |
INFLUENCE OF BISMUTH ON CORROSION-ELECTROCHEMICAL BEHAVIOR OF ALUMINUM ALLOY Al5Fe10Si, IN THE MEDIUM OF ELECTROLYTE NaCl |
|
|
Ganiev I.N., Nurov N.R., Yakubov U.S., Boturov K. |
| Vol 19, No 4 (2017) |
Kinetics of evaporation of metals from Sb-Pb-Sn alloy in vacuum distillation |
|
|
Korolev A.A., Krayukhin S.A., Maltsev G.I. |
| Vol 16, No 3 (2014) |
The study of non-METALLIC INCLUSIONS IN METAL PIPE STEELS Using THERMAL ANALYSIS |
|
|
Fedoseeva E.M. |
| Vol 20, No 1 (2018) |
INFLUENCE OF THE MODES OF MECHANICAL PROCESSING OF STEEL 38KhN3MFA ON THE VALUE OF RESIDUAL MACROSTRESSES |
|
|
Aleksandrova O.Y., Shiryaev A.A., Snegireva A.V., Trofimov V.N., Karmanov V.V. |
| Vol 22, No 1 (2020) |
Effect of spark plasma sintering temperature on “inconel 625” alloy structure |
|
|
Oglezneva S.A., Kachenyuk M.N., Smetkin A.A., Kulmetieva V.B. |
| Vol 17, No 1 (2015) |
THE MECHANISM OF PHASE-SEPARATION PHENOMENA IN SYNTHETIC MINERAL ALLOY |
|
|
Ignatova A.M. |
| Vol 20, No 2 (2018) |
Kinetics of atomic ordering by L10-type in non-stoichiometric copper-gold alloy: X-Ray analysis |
|
|
Generalova K.N., Glukhov A.V., Volkov A.Y. |
| Vol 22, No 3 (2020) |
Review of electroplating-plasma modification methods for the production of anodized coatings on aluminum alloys: microstructure, properties and application |
|
|
Al-Budeiri M.S. |
| Vol 17, No 2 (2015) |
Development of advanced manufacturing technology PARTS OIL PUMP |
|
|
Morozov S.A., Morozov A.S. |
| Vol 20, No 3 (2018) |
36NKhTYu alloy to EP517 steel dissimilar welded joints structural strength increase due to optimization of weld seam dimensions |
|
|
Terentyev E.V., Marchenkov A.Y., Sliva A.P., Goncharov A.L. |
| Vol 22, No 4 (2020) |
Thermokinetic analysis of phase composition of welds aluminum alloy 1420 system Al-Mg-Li. Part 1. Thermokinetic analysis of phase composition of alloy 1420 |
|
|
Fedoseeva E.M., Olshanskaya T.V. |
| Vol 17, No 3 (2015) |
Development of prefabricated structures broaching tool for high-speed broaching shaft of the compressor blades of the cut material |
|
|
Makarov V.F., Petukhov G.D. |
| Vol 22, No 4 (2020) |
Influence of zirconium on specific heat capacity and changes in thermodynamic functions zinc alloy Zn55Al |
|
|
Ganiev I.N., Aliev J.N., Aminov F.M. |
| Vol 17, No 4 (2015) |
MODELLING OF THE TENSION IN COVERINGS AT MICROPLASMA OXYGENATING OF ALUMINIUM ALLOYS |
|
|
Ponomarev I.S., Krivonosova E.A. |
| Vol 21, No 1 (2019) |
Development of technology and flux-cored wire for arc welding of high-strength alloy steels |
|
|
Shalimov M.P., Berezovsky A.V., Smolentsev A.S. |
| Vol 21, No 2 (2019) |
STUDY OF CHARACTERISTICS OF MECHANICAL PROPERTIES OF SAMPLES FROM THE PH1 ALLOY OBTAINED BY SELECTIVE LASER SINTERING METHOD |
|
|
Babentsova L.P., Antsiferova I.V. |
| Vol 23, No 3 (2021) |
Requirements for the arc welding parameters accuracy of a butt joint on an aluminum alloy |
|
|
Sidorov V.P., Melzitdinova A.V., Sovetkin D.E. |
| 1 - 34 of 34 Items |
|
