Issue |
Title |
No 1 (2014) |
Mathematical models of growth deformation |
|
Dolganova O.Y., Lokhov V.A. |
No 4 (2017) |
Experimental study of deformation properties of a bulk layer from plumbum balls under dynamic and quasistatic loading |
|
Bragov A.M., Konstantinov A.I., Kochetkov A.V., Modin I.A., Savikhin A.O. |
No 4 (2021) |
DETERMINATION OF THE STRESS STATE AND THE FORCE OF DEFORMATION OF BALL-SHAPED BILLETS IN A CLOSED MATRIX |
|
Ashkeyev Z.A., Andreyachshenko V.A., Abishkenov M.Z., Bukanov Z.U. |
No 5 (2023) |
METHODS AND RESULTS OF STUDYING THE PORTEVIN – LE CHATELIER EFFECT: EXPERIMENTS AND MACROPHENOMENOLOGICAL MODELS |
|
Trusov P.V., Chechulina Е.А. |
No 5 (2023) |
CRYSTAL PLASTICITY FINITE-ELEMENT SIMULATIONS FOR QUASISTATIC DEFORMATION OF POLYCRYSTALS IN TERMS OF EXPLICIT DYNAMICS |
|
Romanova V.A., Balokhonov R..., Borodina A., Shakhidzhanov V.S., Lychagin D.V., Emelianova E.S., Pisarev M. |
No 2 (2023) |
STRESS-STRAIN STATE DURING DRAFT OF WIDE BANDS WITH SHEAR |
|
Ashkeyev Z.A., Andreyachshenko V.A., Nogaev K.A., Bukanov Z.U. |
No 3 (2014) |
FEATURES OF BEHAVIOR OF LOW-MODULUS VISCOELASTIC POLYMER COMPOSITES UNDER CHANGING STRAIN AMPLITUDE OF LOW-FREQUENCY COMPONENT OF BIHARMONIC LOAD |
|
Yankin A.S., Bulbovich R.V., Slovikov S.V., Wildemann V.E. |
No 1 (2022) |
Mathematical model of oxide film deformation on the surface of a metallic melt in an alternating magnetic field |
|
Nikulin I.L., Demin V.A. |
No 3 (2017) |
Processing fine magnesium materials. Numerical simulation and experimental analyses |
|
Aptukov V.N., Romanov P.V., Skryabina N.E., Fruchart D. |
No 1 (2020) |
The limit state of concrete and reinforced concrete rods at complex and longitudinal-transverse bending |
|
Nemirovskii Y.V., Tikhonov S.V. |
No 3 (2024) |
FEATURES OF DEFORMATION OF A BIMETALLIC PLATE |
|
Barannikova S.A., Li Y.V. |
No 2 (2014) |
Mathematical modelling of deformation and damage accumulation under cyclic loading |
|
Bondar V.S., Danshin V.V., Makarov D.A. |
No 4 (2021) |
Elastic-plastic invariant of autowave plasticity |
|
Zuev L.B., Barannikova S.A., Gorbatenko V.V. |
No 4 (2017) |
CRITICAL DYNAMICS OF LOCALIZED INSTABILITIES OF PLASTIC FLOW IN THE AL-MG ALLOY |
|
Efremov D.V., Oborin V.A., Uvarov S.V., Naimark O.B. |
No 4 (2019) |
Experimental analysis of the effect of discrete aggregate on the bending stability of thin-walled cylindrical shells |
|
Petrov M.V. |
No 2 (2024) |
MATHEMATICAL MODELING OF THE DYNAMICS OF THE AEROELASTIC "PIPELINE – PRESSURE SENSOR" SYSTEM |
|
Velmisov P.A., Tamarova Y.A. |
No 2 (2014) |
Investigation of influence of stress state parameters of fault zones on peculiarities of their mechanical response under shear loading |
|
Astafurov S.V., Shilko E.V., Psakhie S.G. |
No 4 (2021) |
Analysis of stress fields at the crack tip and fracture resistance parameters under conditions of gradient plasticity |
|
Khamidullin R.M., Fedotova D.V. |
No 4 (2019) |
Elastoplastic deformation of a rotating hollow cylinder with a rigid casing |
|
Prokudin A.N., Firsov S.V. |
No 2 (2024) |
ABOUT ONE METHOD OF STUDYING THE COEFFICIENT OF THERMAL EXPANSION OF POLYMERS |
|
Trufanov А.N. |
No 2 (2015) |
Simulation of stamping workpieces implants process using schemes of severe plastic deformation processes |
|
Tarasov A.F., Altukhov A.V., Sheikin S.E., Baitsar V.A. |
No 4 (2018) |
Generalized dynamic theory of a solid particle grinding by pulse-force compression with two non-deformable balls |
|
Abdeev B.M., Baigereyev S.R., Guryanov G.A. |
No 1 (2024) |
MODELING OF HIGH-RATE HARDENING OF A POLYMER COMPOSITE MATERIAL UNDER LOADING ALONG THE REINFORCEMENT DIRECTION |
|
Fedulov B.N., Konstantinov A.Y., Fedorenko A.N., Sergeichev I.V. |
No 4 (2015) |
Biharmonic (two-frequency) load frequencies influence on mechanical behavior of solid propellant simulator |
|
Yankin A.S. |
No 3 (2021) |
The Applied mechanical and mathematical model of grinding of a solid particle by static crushing |
|
Guryanov G.A., Abdeev B.M., Baigereyev S.R., Kim V.A., Suleimenov A.D. |
No 4 (2018) |
Experimental Study of Short-Term Transient Creep of the Al/SiC Metal-Matrix Composite under Uniaxial Compression |
|
Smirnov S.V., Kryuchkov D.I., Nesterenko A.V., Berezin I.M., Vichuzhanin D.I. |
No 1 (2016) |
Finite-element modelling of thermal and deformational processes in manufacturing high-strength wire |
|
Shavrin O.I., Skvortsov A.N. |
No 3 (2021) |
STRESS STATE AND CONDITIONS FOR CRACK INITIATION IN THE ADHESION LAYER OF THE COMPOSITE |
|
Bogacheva V.E., Glagolev V.V., Glagolev L.V., Markin A.A. |
No 4 (2018) |
The methodical Aspects of Strength, Deformation and Energy characteristic Determination of Salt Rocks under Direct Tensile Loading of Rock Specimens in Laboratory Conditions |
|
Asanov V.A., Pankov I.L., Kuzminyh V.S., Morozov I.A. |
No 3 (2016) |
Graph model of three-dimensional elastic solids in Cartesian Coordinates |
|
Tyrymov A.A. |
No 1 (2021) |
Studying Deformation Behaviors in Austenitic Stainless Steels within a Temperature Range of 143 K < T < 420 K |
|
Barannikova S.A., Nikonova A.M., Kolosov S.V. |
No 4 (2018) |
Features of Deformation Behavior of Structural Steel during Forging |
|
Andreyachshenko V.A., Isheva Y.B. |
No 2 (2023) |
DYNAMICS AND STABILITY OF KAPITSA'S TWO-LINK PENDULUM |
|
Belyaev A.K., Polyakova O.R., Tovstik T.P. |
No 3 (2016) |
Experimental study of deformation properties of a package of woven metal mesh under dynamic and quasi-static stressing |
|
Bragov A.M., Zhegalov D.V., Konstantinov A.Y., Kochetkov A.V., Modin I.A., Savikhin A.O. |
No 4 (2020) |
Research of the asymmetric rolling of workpieces |
|
Ashkeyev Z.A., Andreyachshenko V.A., Bukanov Z.U. |
No 1 (2019) |
The Influence of Stress Concentrators on the Magnesium Alloy Mechanical Behavior under Deformation at High Strain Rates in the Temperature Range from 295 to 673 K |
|
Skripnyak V.A., Skripnyak V.V., Kozulin A.A., Iohim K.V. |
No 1 (2017) |
The possibilities and limitations of the homogenized description of inelastic behavior of brittle porous materials under constrained conditions |
|
Astafurov S.V., Shilko E.V., Psakhie S.G. |
No 2 (2020) |
The current state and tendencies of using rheological models for self-forming wooden structures |
|
Ponomarev V.S., Kashevarova G.G. |
No 1 (2019) |
Autowave mechanics of metal plasticity |
|
Zuev L.B., Barannikova S.A. |
No 1 (2023) |
APPLICABILITY INDICATORS FOR THE NONLINEAR MAXWELL-TYPE ELASTO-VISCOPLASTIC MODEL WITH POWER MATERIAL FUNCTIONS AND TECHNIQUES TO CALIBRATE THEM |
|
Khokhlov А.V. |
No 1 (2017) |
Strength computational and experimental analysis of turbojet fan case under the impact of a torn blade |
|
Kurteyev V.A., Burdyugov S.I., Inozemtsev A.A., Lomaev V.I., Mozerov B.G., Sokolovskiy M.I., Shatrov V.B. |
No 2 (2020) |
Investigation of the mechanical behavior of a two-phase Mg-Ni compound during fast compression |
|
Aptukov V.N., Skryabina N.E., Fruchart D. |
No 3 (2022) |
Study of deformation structures maps in metals under tension |
|
Barannikova S.A., Iskhakova P.V. |
No 3 (2017) |
STATE EQUATIONS OF THE DRAPH MODEL OF THREE-DIMENSIONAL ELASTIC SOLIDS IN CARTESIAN COORDINATES |
|
Tyrymov A.A. |
No 1 (2020) |
The Refined Plane Mechanical and Mathematical Model Determining Stresses in the Base of the Strip Foundation and Elastic Sediment |
|
Abdeev B.M., Brim T.F., Muslimanova G. |
1 - 45 of 45 Items |
|