| Issue |
Title |
| Vol 15, No 2 (2013) |
POWER BALANCE OF PLASMA ARC CUTTING USING REVERSE POLARITY CURRENT |
|
|
Scshicin Y.D., Scshicin V.Y., Neulybin S.D. |
| Vol 18, No 4 (2016) |
COMPARATIVE ANALYSIS OF CORROSION- AND WEAR RESISTANT PRODUCTS FROM COMPOSITE METAL STEEL-COPPER MADE BY PLASMA SURFACING AT CURRENTS DIRECT AND REVERSE POLARITY |
|
|
Schitsyn Y.D., Belinin D.S., Neulybin S.D., Terentyev S.A. |
| Vol 23, No 1 (2021) |
Investigation of parameters of plasma formed in the zone of laser welding in vacuum |
|
|
Letyagin I.Y., Felikan K.V., Belenkiy V.Y., Erikov A.P. |
| Vol 19, No 4 (2017) |
PLASMA SURFACING: MATHEMATICAL MODEL, NUMERICAL IMPLEMENTATION AND VERIFICATION |
|
|
Neulybin S.D., Permyakov G.L., Trushnikov D.N., Shchitsyn I.D., Belenkiy V.Y., Belinin D.S. |
| Vol 18, No 1 (2016) |
Assessment of through pro-melting at laser welding on the basis of registration of a plasma torch |
|
|
Letiagin I.I., Fedoseeva E.M. |
| Vol 16, No 2 (2014) |
FEATURES OF HEAT TRANSFER TO THE PRODUCT WHEN WORKING ON THE PLASMA TORCH CURRENT OF REVERSED POLARITY |
|
|
Shicin Y.D., Belinin D.S., Kuchev P.S., Neulybin S.D. |
| Vol 20, No 1 (2018) |
Methodical principles of computer-aided gas-dynamic design In electroplasma technologies |
|
|
Anakhov S.V., Pyckin Y.A., Matushkin A.V. |
| Vol 20, No 3 (2018) |
Investigation of secondary emission signals from the impact zone of the laser beam during laser beam welding in vacuum |
|
|
Letyagin I.Y., Trushnikov D.N., Belenkii V.Y., Pang S., Lyamin Y.V. |
| Vol 16, No 3 (2014) |
PLASMA SURFACING OF HIGH-ALLOY STEEL 10Cr18Ni8Ti ON LOW-ALLOY STEEL 09Mg2Si |
|
|
Shchitsyn Y.D., Neulybin S.D., Kuchev P.S., Gilev I.A. |
| Vol 22, No 3 (2020) |
Review of electroplating-plasma modification methods for the production of anodized coatings on aluminum alloys: microstructure, properties and application |
|
|
Al-Budeiri M.S. |
| Vol 20, No 3 (2018) |
FORMATION OF STRUCTURE AND PROPERTIES OF STEEL 04Сr18Ni9 AT ADDITIVE PRODUCTION OF TRAININGS |
|
|
Shchitsyn Y.D., Terentyev S.A., Neubybin S.D., Artemov A.O., Belinin D.S. |
| Vol 20, No 3 (2018) |
The temperature correlation parameters of gas-vortex stabilization of metal-cutting plasma torches |
|
|
Anakhov S.V., Pyckin Y.A., Matushkin A.V. |
| Vol 17, No 2 (2015) |
Determination of voltage drop across the anode area arc plasma processing of metals |
|
|
Schitcyn Y.D., Belinin D.S., Neulybin S.D., Gilev I.A., Panov A.I. |
| Vol 23, No 1 (2021) |
Prospects for the use of a reverse polarity plasma arc for correcting casting defects in products made of AK7Ch alloy |
|
|
Belinin D.S., Schitsyn Y.D., Nikulin R.G., Olshanskaya T.V., Zagrebin D.S., Pichkalev M.V. |
| Vol 19, No 1 (2017) |
Transformation of non-metallic inclusions in steels by the action of the plasma heat source |
|
|
Krivonosova E.A., Belinin D.S., Krivonosova E.K. |
| Vol 21, No 3 (2019) |
NEW TECHNIQUE TO IMPROVE THE THERMO-KINETIC PROPERTIES OF METAL-CUTTING PLASMATRONS |
|
|
Anakhov S.V., Pyckin Y.A., Matushkin A.V. |
| Vol 17, No 3 (2015) |
Plasma welding of aluminum alloys of small thicknesses |
|
|
Bazhenov A.M., Panov A.I., Gilev I.A. |
| Vol 19, No 3 (2017) |
The comparison research of plasma surface hardening of 34CrNiMo6 steel produced on direct polarity and reversed polarity current |
|
|
Shitsyn Y.D., Belinin D.S., Neulybin S.D., Sinani I.L., Terentyev S.A., Verkhorubov V.S. |
| Vol 17, No 4 (2015) |
PLASMA WELDING OF DISSIMILAR METALS AT REVERSE CURRENT POLARITY |
|
|
Shchitsyn I.D., Kozhanov A.V., Belinin D.S., Neulybin S.D. |
| Vol 15, No 1 (2013) |
THE USE OF COMBINATION FEED GASES TO INCREASE THE THERMAL EFFICIENCY OF THE PLASMA PROCESSES |
|
|
Shitcin Y.D., Sinani I.L., Belinin D.S., Kuchev P.S., Neulybin S.D. |
| Vol 21, No 4 (2019) |
EXPRESS METHOD FOR ASSESSING THE QUALITY OF A STRENGTHENED METAL PRODUCTS LAYER USING HIGH-FREQUENCY CURRENTS |
|
|
Maleronok V.V., Alifanov A.V. |
| Vol 18, No 1 (2016) |
Production of ultra high temperature ceramic materials via sintering of compositions based on zirconium and hafnium borides |
|
|
Lyamin I.B., Poilov V.Z., Priamilova E.N., Zhakova O.V. |
| Vol 23, No 4 (2021) |
NEW TECHNOLOGIES FOR PRODUCING ELECTRODE MATERIALS OF LEAD-ACID BATTERY WITH INCREASED RELIABILITY (REVIEW) |
|
|
Sergeenko S.N., Vasiliev A.N., Vasilenko D.V., Yatsenko A.N. |
| Vol 22, No 1 (2020) |
Effect of spark plasma sintering temperature on “inconel 625” alloy structure |
|
|
Oglezneva S.A., Kachenyuk M.N., Smetkin A.A., Kulmetieva V.B. |
| Vol 20, No 1 (2018) |
ASSESSMENT OF A POSSIBILITY POLISHING OF STAINLESS STEELS JET ELECTROLYTIC AND PLASMA PROCESSING |
|
|
Novoselov M.V., Shilling N.G., Rudavin A.A., Radkevich M.M., Popov A.I. |
| Vol 22, No 2 (2020) |
Thermodynamic analysis of processes in gas and ion-plasma nitriding. mechanism and kinetics of nitriding in a glow discharge |
|
|
Toshkov V.T., Simonov Y.N., Silina O.V. |
| Vol 18, No 2 (2016) |
WEAR RESISTANCE OF ARC SPRAYED COATINGS TYPE OF Fe-C-Cr-Ti-Al AFTER PLASMA REMELTING |
|
|
Verkhorubov V.S., Nevezhin S.V., Korobov I.S., Neulybin S.D., Terent’ev S.A., Shchitsyn I.D. |
| Vol 16, No 2 (2014) |
PLASMA WELDING ON THIN-WALLED COMPOUNDS FLANGING |
|
|
Shicin Y.D., Belinin D.S., Kuchev P.S., Neulybin S.D., Gilev I.A. |
| Vol 22, No 3 (2020) |
Investigation of the operation of the anodes of arc plasmatrons for operation on reverse polarity of current |
|
|
Shitsyn Y.D., Shitsyn V.Y., Neulybin S.D., Nikulin R.G., Nikulina S.G., Karunakarah K.P. |
| Vol 18, No 2 (2016) |
Physic-mechanical characteristics researching of nitride and carbon coverings on the basis of AlSiCr and AlSiTi |
|
|
Gusev V.G., Kochetov D.O. |
| Vol 18, No 2 (2016) |
CREATING COMPOSITE MATERIALS BASED ON HIGH-NICKEL ALLOYS WITH THE USE OF A PLASMA ARC AT CURRENT REVERSE POLARITY |
|
|
Shchitsyn I.D., Belinin D.S., Neulybin S.D., Terent’ev S.A., Efimova A.A. |
| Vol 17, No 1 (2015) |
Plasma welding penetration arc with wire feeding nonferrous metals and complex alloys |
|
|
Schitcyn Y.D., Belinin D.S., Gilev I.A. |
| Vol 22, No 3 (2020) |
Features of creating combined heat-resistant multicomponent coatings for higt-temperature |
|
|
Guzanov B.N., Pugacheva N.B., Alekseev V.D., Slukin E.Y. |
| Vol 18, No 3 (2016) |
METALLOGRAPHIC ANALYSIS OF MORPHOLOGY EROSION PRODUCTS |
|
|
Ablyaz T.R., Oglezneva S.A., Ogleznev N.D., Grisharin A.O. |
| Vol 20, No 4 (2018) |
Research of the effect of rare-earth elements on ceramic materials based on ZrB2 - SiC (20 vol. %), obtained by spark plasma sinter |
|
|
Kulmetyeva V.B., Porozova S.E., Chuvashov V.E., Yaburov M.P. |
| Vol 17, No 3 (2015) |
Plasma welding of aluminum alloys when two arc plasma torch at current reverse polarity |
|
|
Shchitsyn I.D., Gilev I.A., Belinin D.S., Neulybin S.D., Bazhenov A.M. |
| Vol 21, No 2 (2019) |
USE OF PLASMA SURFACE FOR ADDITIVE FORMATION OF ALUMINUM ALLOYS BLADE |
|
|
Shchitsin Y.D., Krivonosova E.A., Neulubin S.D., Olshanskaya T.V., Nikulin R.G., Fedoseeva E.M., Terentyev S.A. |
| Vol 17, No 3 (2015) |
Improved corrosion resistance machine parts |
|
|
Platonova E.S. |
| Vol 23, No 2 (2021) |
Possibilities of additive technologies application in designing and manufacturing of weapons of military equipment |
|
|
Voynov P.S., Belenkiy V.Y., Belinin D.S., Varushkin S.V. |
| Vol 19, No 3 (2017) |
On the connection between the energy parameters of secondary emission signals from the laser beam welding zone in vacuum with the parameters of metal penetration |
|
|
Letyagin I.Y., Belenkiy V.Y., Trushnikov D.N. |
| Vol 23, No 2 (2021) |
Influence of current frequency during pulse layer plasma surface on the structure and properties of high-alloy steel during additive formation of products |
|
|
Dushina A.Y., Olshanskaya T.V., Neulybin S.D., Shchitsyn Y.D., Nikulin R.G. |
| Vol 21, No 3 (2019) |
THE INFLUENCE OF PLASMA ELECTROLYTIC CARBONITRIDING ON PHASE COMPOSITION OF Cr-Ni-Al ALLOY |
|
|
Popova N.A., Nikonenko E.L., Erbolatova G.U., Nikonenko A.V. |
| Vol 23, No 3 (2021) |
ABOUT INFLUENCE OF PLASMA SURFACE SCHEMES ON THE FORMATION OF THE STRUCTURE AND PROPERTIES OF TITANIUM ALLOY |
|
|
Akulova S.N., Myshkina A.V., Varushkin S.V., Neulybin S.D., Krivonosova E.A., Shchitsyn Y.D., Olshanskaya T.V. |
| Vol 19, No 4 (2017) |
THE INFLUENCE OF PLASMA TREATMENT REGIMES ON THE DISTRIBUTION OF NONMETALLIC INCLUSIONS IN STEEL |
|
|
Myshkina A.V., Akulova S.N., Krivonosova E.A., Shchitsyn I.D., Sinani I.L. |
| 1 - 44 of 44 Items |
|
