| Issue |
Title |
| Vol 18, No 4 (2016) |
INFLUENCE OF TEMPERING ON THE PROPERTIES OF CARBIDE-FREE-BAINITE STEELS |
|
|
Kaletin A.Y., Kaletina Y.V., Simonov Y.N. |
| Vol 23, No 4 (2021) |
INFLUENCE OF HEAT TREATMENT MODES ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE METASTABLE TITANIUM ALLOY VT23 |
|
|
Veselova V.E., Gladkovsky S.V., Kovalev N.I. |
| Vol 21, No 4 (2019) |
THE INFLUENCE OF DEFORMATION STABILITY OF β-PHASE IN TITANIUM ALLOY BT23 ON THE PHASE COMPOSITION, MICROSTRUCTURE AND MECHANICAL PROPERTIES AFTER TENSION TEST AND IMPACT TEST |
|
|
Gladkovsky S.V., Veselova V.E., Patselov A.M., Khotinov V.A. |
| Vol 16, No 4 (2014) |
NCREASE IN IMPACT STRENGTH OF STRUCTURAL STEELS BY THE CARBIDE-FREE-BAINITE FORMATION |
|
|
Kaletin A.Y., Kaletina Y.V. |
| Vol 20, No 1 (2018) |
INFLUENCE OF THE MODES OF MECHANICAL PROCESSING OF STEEL 38KhN3MFA ON THE VALUE OF RESIDUAL MACROSTRESSES |
|
|
Aleksandrova O.Y., Shiryaev A.A., Snegireva A.V., Trofimov V.N., Karmanov V.V. |
| Vol 18, No 2 (2016) |
CREATING COMPOSITE MATERIALS BASED ON HIGH-NICKEL ALLOYS WITH THE USE OF A PLASMA ARC AT CURRENT REVERSE POLARITY |
|
|
Shchitsyn I.D., Belinin D.S., Neulybin S.D., Terent’ev S.A., Efimova A.A. |
| Vol 20, No 3 (2018) |
36NKhTYu alloy to EP517 steel dissimilar welded joints structural strength increase due to optimization of weld seam dimensions |
|
|
Terentyev E.V., Marchenkov A.Y., Sliva A.P., Goncharov A.L. |
| Vol 23, No 1 (2021) |
Structure of joints of medium-carbon steel after friction welding and surfacing |
|
|
Laptev S.K., Shatsov A.A., Grebenkov S.K. |
| Vol 14, No 4 (2012) |
I-BAR STRENGTH COMPUTATION METHODOLOGY PERFECTION FOR TEACHING OF ENGINEERING DISCIPLINES |
|
|
Holodnyak Y.S., Perig A.V., Matveev I.A. |
| Vol 23, No 3 (2021) |
Destruction of silica fibers with different protective coatings |
|
|
Bulatov M.I., Shatsov A.A. |
| Vol 21, No 1 (2019) |
Development of technology and flux-cored wire for arc welding of high-strength alloy steels |
|
|
Shalimov M.P., Berezovsky A.V., Smolentsev A.S. |
| Vol 16, No 1 (2014) |
INFLUENCE of nonmetallicS and structural constituents on impact strength of LOW-ALLOYED steel |
|
|
Krivonosova E.A., Olshanskaya T.V., Lodyagina T.V., Burtseva O.A. |
| Vol 23, No 3 (2021) |
Influence of the intermediate layer forming method on the structure and properties of steel-aluminium system layered compositions |
|
|
Mikheev R.S., Kalashnikov I.E., Kobeleva L.I. |
| Vol 19, No 1 (2017) |
Calculation of characteristics of metal materials with AMD-methods |
|
|
Kustov A.I., Miguel I.A. |
| Vol 21, No 2 (2019) |
STUDY OF CHARACTERISTICS OF MECHANICAL PROPERTIES OF SAMPLES FROM THE PH1 ALLOY OBTAINED BY SELECTIVE LASER SINTERING METHOD |
|
|
Babentsova L.P., Antsiferova I.V. |
| Vol 16, No 1 (2014) |
Solid modeling of components of the device for the rehabilitation of the elbow |
|
|
Kobitjanskii A.E., Trofimov A.O., Fefilov D.A., Beloborodov V.S. |
| Vol 19, No 1 (2017) |
Railway wheel rim mechanical properties heterogeneity accounting in the problem of contact interaction between wheel and rail |
|
|
Kuzmitskiy Y.O., Shevchenko D.V. |
| Vol 21, No 3 (2019) |
INFLUENCE OF DEFORMATION PARAMETERS OF CYLINDRICAL BODIES BY JOINT TENSION AND TORSION ON THE DISTRIBUTION OF RESIDUAL STRESSES |
|
|
Kryukov A.A., Wildemann V.E. |
| Vol 16, No 3 (2014) |
METHODS OF INFLUENCE ON OXIDE’S AND SULPHIDE’S CHARACTERISTICS IN WELD JOINTS OF LOW-ALLOYED STEEL |
|
|
Krivonosova E.A., Lodyagina T.V. |
| Vol 24, No 1 (2022) |
DEVELOPMENT OF A METHODOLOGY FOR THE DESIGN OF MEMBRANE PRESSURE SENSORS |
|
|
Andreev A.I., Zhukov A.V., Yakovishin A.S. |
| Vol 19, No 3 (2017) |
Investigation of the structure and relative erosion resistance of electrodes-tools made from powder materials based on copper and carbide, carbonitride, tungsten carbosilicide of titanium |
|
|
Ogleznev N.D., Oglezneva S.A., Grevnov L.M., Ablyaz T.R. |
| Vol 21, No 4 (2019) |
INFLUENCE OF HEATING TEMPERATURE AND HOLDING TIME ON THE GRAIN SIZE IN MEDIUM-CARBON STRUCTURAL STEELS 29H2G2S2MF AND 44H2G2S2MF |
|
|
Iurchenko A.N., Grebenkin R.D., Menlysheva N.S., Simonov I.N. |
| Vol 16, No 4 (2014) |
THE POSSIBILITY OF MULTILAYER METALLIC MATERIALS FOR THE MANUFACTURE OF HIGH PRESSURE CYLINDERS |
|
|
Plokhikh A.I. |
| Vol 19, No 4 (2017) |
THE STUDY OF TRANSFORMATIONS, STRUCTURE AND PROPERTIES OF INDUSTRIAL SMELTING SYSTEM-ALLOYED LOW-CARBON STEEL 12Kh3G2МFS |
|
|
Poduzov D.P., Simonov M.Y., Yurchenko A.N., Simonov Y.N., Bukhalov A.D. |
| Vol 19, No 4 (2017) |
Influence of onset temperatures of thermite charge and casting molds on structure and physical-mechanical properties of casting blanks, obtained by aluminothermic reduction |
|
|
Predein V.V., Komarov O.N., Popov A.V., Zhilin S.G. |
| Vol 21, No 4 (2019) |
STRUCTURAL-PHASE STATE OF UFG TITANIUM IMPLANTED WITH ALUMINUM IONS |
|
|
Nikonenko A.V., Popova N.A., Nikonenko E.L., Kalashnikov M.P., Oks E.M., Kurzina I.A. |
| Vol 17, No 4 (2015) |
INFLUENCE OF STRUCTURE AND NONMETALLIC INCLUSIONS ON PROPERTIES OF WELDED SEAMS FROM X65 STEEL |
|
|
Fedoseeva E.M. |
| Vol 20, No 1 (2018) |
DETERMINATION OF THE CHARACTERISTICS OF THE BIT FEEDING MECHANISM OF THE DOWNHOLE DRILLING MOTOR |
|
|
Kobityansky A.E., Krutik E.N., Beloborodov V.S. |
| Vol 22, No 1 (2020) |
The mechanical properties of the material deposited on a plate of steel with high carbon equivalent |
|
|
Abashkin E.E., Zhilin S.G., Komarov O.N. |
| Vol 18, No 2 (2016) |
Physic-mechanical characteristics researching of nitride and carbon coverings on the basis of AlSiCr and AlSiTi |
|
|
Gusev V.G., Kochetov D.O. |
| Vol 22, No 4 (2020) |
Features of interaction between liquid aluminum and titanium in the formation of composite materials |
|
|
Kovtunov A.I., Khokhlov Y.Y., Myamin S.V. |
| Vol 23, No 1 (2021) |
Mathematical model of the dynamics of the process of cutting seals from thermally expanded graphite |
|
|
Kobityansky A.E., Beloborodov V.S. |
| Vol 18, No 3 (2016) |
Microstructure and dynamic loading resistance of layered steel/Al-composite produced by rolling |
|
|
Gladkovsky S.V., Kuteneva S.V., Veselova V.E., Kokovikhin E.A. |
| Vol 20, No 4 (2018) |
Study of the use of high alumina cement in the production of proppants for hydraulic fracturing |
|
|
Yarmonov A.N. |
| Vol 18, No 4 (2016) |
Analysis of transformation of subsurface layers structure of steels and their influences on process of hardening with AMD-methods |
|
|
Kustov A.I., Miguel I.A. |
| Vol 20, No 4 (2018) |
INFLUENCE OF nanodispersed poWders OF CARBON TO THE STRUCTURE AND PROPERTIES OF POWDER STEEL by SPS |
|
|
Oglezneva S.A., Kulikova A.A., Grevnov L.M., Ogleznev N.D. |
| 1 - 36 of 36 Items |
|
