Issue	Title
No 4 (2022)	ELECTROMAGNETIC COUPLING OF PIEZOELECTRIC/FERRITE COMPOSITE WITH INITIAL STRESS STATE	Abstract (Rus)
Pan’kov A.A.
No 5 (2023)	THE PHYSICAL AND MECHANICAL MODEL OF ELECTROCHEMICAL PROCESSES OF FORMING COPPER AND ELECTROСORUNDUM MICRO- AND NANOCOMPOSITE COATINGS	Abstract (Rus)
Molchanov E.K., Vakhrushev A.V.
No 4 (2022)	DETERMINATION OF THE CONTACT AREA UNDER CYCLIC LOADING OF CONTACT PAIRS OF ISOTROPIC MATERIALS ON THE BASIS OF 3D SURFACE MICRORELIEF MODELLING	Abstract (Rus)
Ezhov A.D., Bykov L.V., Krylova Y.A.
No 4 (2016)	Dynamics of unbalanced flexible rotor with anisotropic supports during contact with the stator	Abstract (Rus)
Kurakin A.D., Nikhamkin M.S., Semenov S.V.
No 4 (2021)	The potential of using SWCNTs, MWCNTs and CNFs capable of increasing the composite material dimensional and technological stability as modifiers of a polymer matrix	Abstract (Rus)
Obvertkin I.V., Pasechnik K.A., Vlasov A.Y.
No 1 (2018)	Mathematical model of pulse scanning of pressure along a piezo-electro-luminescent fiber-optical sensor	Abstract (Rus)
Pan’kov A.A.
No 2 (2024)	COMPUTATIONAL-EXPERIMENTAL METHOD FOR STRESS-STRAIN CURVE CONSTRUCTING UNDER CONDITIONS OF INHOMOGENEOUS STRESS FIELDS	Abstract (Rus)
Wildemann V.E., Mugatarov A.I., Khmelev A.A.
No 4 (2018)	On Modeling of Overhead TLC Galloping and Parametric Analysis of Pendulum Dampers Efficiency	Abstract (Rus)
Sergey I.I., Vinogradov A.A., Danilin A.N., Kurdyumov N.N.
No 1 (2023)	IDENTIFICATION OF DEFECTS IN A COATING WEDGE BASED ON ULTRASONIC NON-DESTRUCTIVE TESTING METHODS AND CONVOLUTIONAL NEURAL NETWORKS	Abstract (Rus)
Soloviev A.N., Sobol B.V., Vasiliev P.V., Senichev A.V., Novikova A.I.
No 3 (2016)	Evaluation of service life of heat-resistant alloys under cyclic thermomechanical loading	Abstract (Rus)
Volkov I.A., Igumnov L.A.
No 3 (2021)	Frequency characteristics of built-in fiber-optic PEL-sensor to diagnose complex harmonic deformations within the polymer composite structure	Abstract (Rus)
Pan’kov A.A., Pisarev P.V.
No 2 (2018)	Resonant diagnostics of temperature distribution by the piezo-electro-luminescent fiber-optical sensor according to the solution of the Fredholm integral equation	Abstract (Rus)
Pan’kov A.A.
No 6 (2023)	ANALYSIS OF THE INFLUENCE OF ALLOYING ADDITIONS ON THE STRUCTURE OF AL-LI ALLOYS AND DEFORMATION MECHANISMS UNDER SUPERPLASTIC CONDITIONS (AN ANALYTICAL REVIEW)	Abstract (Rus)
Sharifullina E.R., Shveykin A.I., Trusov P.V.
No 4 (2018)	Construction and analysis of finite-element models of inhomogeneous deformable solids based on scanning	Abstract (Rus)
Pykhalov A.A., Duong V.L., Tolstikov V.G.
No 1 (2023)	SIMULATION OF ELASTOPLASTIC FRACTURE OF A CENTER CRACKED PLATE	Abstract (Rus)
Astapov N.S., Kurguzov V.D.
No 4 (2016)	The influence of fluid filtration on the strength of porous fluid-saturated brittle materials	Abstract (Rus)
Dimaki A.V., Shilko E.V., Astafurov S.V., Psakhie S.G.
No 2 (2021)	The Crack Growth in the Imitation Model of a GTE Turbine Disk under Operating Loading Conditions	Abstract (Rus)
Yarullin R.R., Shlyannikov V.N., Sulamanidze A.G.
No 6 (2023)	SIMULATING THE STRESS-STRAIN STATE DURING LASER METAL DEPOSITION TO DETERMINE THE FINAL WARPING OF PRODUCTS	Abstract (Rus)
Smetannikov O.Y., Bekmansurov M.R., Ilinykh G.V., Dongauzer K.A.
No 4 (2018)	The methodical Aspects of Strength, Deformation and Energy characteristic Determination of Salt Rocks under Direct Tensile Loading of Rock Specimens in Laboratory Conditions	Abstract (Rus)
Asanov V.A., Pankov I.L., Kuzminyh V.S., Morozov I.A.
No 2 (2017)	Modeling of the cross-section ovality of single crystal nickel-based superalloy samples under tension	Abstract (Rus)
Semenov A.S., Beliaev M.O., Grishchenko A.I.
No 2 (2021)	The Image-Based Finite Element Evaluation of the Deformed State	Abstract (Rus)
Vorobiev O.V., Semenova E.V., Mukhin D.A., Statsenko E.O., Baltina T.V., Gerasimov O.V.
No 1 (2019)	The Research of the Mechanical Behavior of Elastically Transformable Composite Structures	Abstract (Rus)
Khaliulin V.I., Batrakov V.V., Shabalin L.P., Kiauka M.Y., Bezzametnov O.N.
No 3 (2017)	Modeling of elastic-plastic deformation of work material along multielement piecewise zig-zag linear trajectories	Abstract (Rus)
Zubchaninov V.G., Alekseev A.A., Gultiaev V.I.
No 3 (2020)	Modeling the deformation process of a plate with a stress concentrator taking into account the postcritical stage of material deformation	Abstract (Rus)
Wildemann V.E., Tretyakov M.P., Mugaratov A.I.
No 4 (2023)	BUILT-IN FIBER-OPTIC MECHANOPHOTOLUMINESCENT SENSOR OF COMPLEX DEFORMED STATE FOR MONITORING VIBRATIONS OF POLYMER COMPOSITE STRUCTURES	Abstract (Rus)
Pan’kov A.A.
No 2 (2014)	Mathematical modelling of stratified flow of polymer melts in an axisymmetric formulation	Abstract (Rus)
Bachurina M.V., Kazakov A.V., Trufanova N.M.
No 4 (2022)	INFLUENCE OF GEOMETRIC, KINEMATIC, GAS-DYNAMIC PARAMETERS ON ROTOR DYNAMIC STATE TAKING INTO ACCOUNT GAS DYNAMIC FLOW IN LABYRINTH SEALS CLEARANCES	Abstract (Rus)
Modorskii V.Y., Cherepanov I.E., Babushkina A.V.
No 3 (2017)	ANSYS numerical modeling of electroelastic fields in the piezoelectro luminescent fiber-optical sensor diagnosing the composite volume deformed state	Abstract (Rus)
Pan’kov A.A., Pisarev P.V.
No 2 (2020)	Numerical Modeling of Electroelastic Fields in the Surface Piezoelectric Luminescent Optical Fiber Sensor to Diagnose Deformation of Composite Plates	Abstract (Rus)
Pan’kov A.A., Pisarev P.V.
No 4 (2023)	MODELING OF AXIAL COMPRESSION OF V95/10% SIC ALUMINUM MATRIX COMPOSITE UNDER NON-STATIONARY THERMOMECHANICAL CONDITIONS	Abstract (Rus)
Kryuchkov D.I., Nesterenko A.V., Zalazinsky A.G.
No 4 (2014)	MODELLING OF MARTENSITIC TRANSFORMATIONS IN STEELS: KINEMATICS OF THE MESO-LEVEL	Abstract (Rus)
Nyashina N.D., Trusov P.V.
No 3 (2022)	Effect of mechanical load on resultant composite piezomodules	Abstract (Rus)
Pan’kov A.A.
No 4 (2017)	ESTIMATION OF CRACK PROPAGATION DIRECTION ANGLE UNDER MIXED-MODE LOADING (MODE I AND MODE II): GENERALIZED FRACTURE MECHANICS CRITERIA AND ATOMISTIC MODELING (MOLECULAR DYNAMICS METHOD)	Abstract (Rus)
Stepanova L.V., Bronnikov S.A., Belova O.N.
No 2 (2020)	Modeling the processes of atom structure formation of a superconducting spin valve	Abstract (Rus)
Vakhrushev A.V., Fedotov A.Y., Savva Y.B., Sidorenko A.S.
No 4 (2023)	STUDYING GRAPHENE ELECTROMECHANICAL BEHAVIOR BASED ON THE ELASTIC PLATES MOMENT-MEMBRANE THEORY	Abstract (Rus)
Krylova E.Y., Sargsyan S.H.
No 4 (2014)	Coupled model of fluid-saturated porous materials based on a combination of discrete and continuum approaches	Abstract (Rus)
Dimaki A.V., Shilko E.V., Astafurov S.V., Korostelev S.Y., Psakhie S.G.
No 3 (2022)	Low-cycle fatigue of V-notched cylindrical samples of bronze alloy	Abstract (Rus)
Abashev D.R.
No 4 (2017)	Theoretical and experimental study of structural elements’ influence of fiber-optic strain sensor on its readings and correction procedure for transfer function	Abstract (Rus)
Sozonov N.S., Shardakov I.N.
No 3 (2019)	The Modeling of the Edge Fatigue Crack Growth under High Frequency Loading	Abstract (Rus)
Nikitin A.D., Nikitin I.S., Stratula B.A.
No 4 (2023)	ELASTIC-PLASTIC BEHAVIOR AND FRACTURE OF STRUCTURES WITH LOSS CONCENTRATORS UNDER CYCLIC LOADS	Abstract (Rus)
Bondar V.S., Abashev D.R., Fomin D.J.
No 4 (2015)	Modeling the treatment of high-energy pulsed electromagnetic field of the micro-cracks in a polycrystalline metal	Abstract (Rus)
Kukudzhanov K.V.
No 1 (2022)	Two-dimensional model of grain boundary diffusion and oxidation	Abstract (Rus)
Chepak-Gizbrekht M.V., Knyazeva A.G.
No 4 (2017)	Modeling of the product termomechanical behavior during 3D deposition of wire materials in ANSYS	Abstract (Rus)
Smetannikov O.Y., Trushnikov D.N., Maksimov P.V., Bartolomey M.L., Kovyazin A.V.
No 3 (2024)	FINITE-DIFFERENCE ANALYSIS OF PLANE-PARALLEL AND PLANE-RADIAL FLOWS IN THE ELASTIC MODE OF LIQUID AND GAS FILTRATION	Abstract (Rus)
Eremin M.O., Bakeev R.A., Stefanov Y.P., Chirkov A.O., Pazhin A.
No 3 (2019)	The Analysis of residual stresses in layered composites with [0°/90°] layup	Abstract (Rus)
Bondarchuk D.A., Fedulov B.N., Fedorenko A.N., Lomakin E.V.
No 3 (2023)	NON-CONTACT DEFORMATION WITH REVERSIBLE SURFACE PLASTIC DEFORMATION	Abstract (Rus)
Zaides S.A., Nguyen N.N.
No 4 (2015)	Formation of divergent testing efforts and experimental evaluation of material strength under biaxial stretching	Abstract (Rus)
Zenkov E.V., Tsvik L.B.
No 4 (2021)	© ПНИПУ Numerical and experimental research of the evaluation of the mechanical behavior of carbon fiber reinforced polymerspecimens with an embedded Smart-layer	Abstract (Rus)
Baranov M.A., Nikiforov A.S., Mikryukov A.O., Ermakov D.A.
No 4 (2017)	Modeling the dynamic penetration processes of dimensional bodies in a compressible elastoplastic medium	Abstract (Rus)
Linnik E.Y., Kotov V.L., Konstantinov A.Y.
No 2 (2024)	MODELING THE DEFORMATION PROCESS OF AN UNDERWATER GAS PIPELINE UNDER THE EXPLOSIVE LOADING	Abstract (Rus)
Abuzyarov М.H., Glazova E.G., Kochetkov A.V., Kochetkov M.A.
No 2 (2019)	Modeling of Strands Formation in Elastomeric Composites	Abstract (Rus)
Sokolov A.K., Garishin O.K., Svistkov A.L.
No 2 (2023)	MODELING OF STEADY-STATE LIQUID FILTRATION IN A PIECEWISE INHOMOGENEOUS ELASTIC-POROUS MEDIUM IN THE CLASS OF ALMOST-PERIODIC FUNCTIONS (PLANE PROBLEM)	Abstract (Rus)
Mikishanina E.A.
No 4 (2015)	On account of scale effects in the simulation of mechanical and tribological properties of two-phase microand nanomodified polymer coatings	Abstract (Rus)
Buznik V.M., Lurie S.A., Volkov-Bogorodskiy D.B., Knyazeva A.G., Solyaev Y.O., Popova E.I.
No 4 (2021)	Anti-icing indicator polymer coating with built-in fiber-optic PEL-sensor for indication, location and de-icing of aerodynamic surfaces	Abstract (Rus)
Pan’kov A.A., Pisarev P.V.
No 4 (2017)	Numerical solution for an inverse problem about determination of volumetric heat capacity of rock mass during artificial freezing	Abstract (Rus)
Zhelnin M.S., Plekhov O.A., Semin M.A., Levin L.Y.
No 2 (2024)	MODELING OF PHOTOPOLYMER CURING	Abstract (Rus)
Fedulov B.N.
No 2 (2019)	Studying of the influence of 3D wire deposition process parameters on the formation of residual deformations	Abstract (Rus)
Smetannikov O.Y., Maksimov P.V., Trushnikov D.N., Permyakov G.L., Belenkiy V.Y., Farberov A.S.
No 1 (2023)	NUMERICAL SIMULATION OF GAS-DYNAMIC AND STRENGTH CHARACTERISTICS OF A FAN FOR THE EXPERIMENTAL TEST RIG FOR INVESTIGATION OF ICE BREAKDOWN ON ROTATING WORKING BLADES	Abstract (Rus)
Kalyulin S.L., Kalyulin N.A., Modorskii V.Y., Vladimirov N.V.
1 - 58 of 58 Items

Search tips:

• Search terms are case-insensitive
• Common words are ignored
• By default only articles containing all terms in the query are returned (i.e., AND is implied)
• Combine multiple words with OR to find articles containing either term; e.g., education OR research
• Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
• Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
• Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
• Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"