| Issue |
Title |
| Vol 22, No 2 (2020) |
The evolution of thermophysical and physico-mechanical properties of Ti and Al cathodes in the electro arc evaporation of Ti1-xAlxN film |
|
|
Kameneva A.L., Kameneva N.V. |
| Vol 17, No 3 (2015) |
DEVELOPMENT OF THE CONSTRUCTION MULTILAYER FILM Ti-Al-N WITH STABILITY AND HIGH FUNCTIONAL PROPERTIES |
|
|
Soshina T.O. |
| Vol 21, No 2 (2019) |
Influence of temperature and time of thermal processing on the structure of enamel coating |
|
|
Soshina T.O., Mukhamadyarova V.R. |
| Vol 21, No 2 (2019) |
Design features of described magnetorheological damping and vibration damping systems which are based on distributed dissipative-rigidity properties in the working fluid |
|
|
Naigert K.V., Tselischev V.A. |
| Vol 17, No 4 (2015) |
Properties of materials based on the MAX-phases (Rеview) |
|
|
Smetkin A.A., Maiorova I.K. |
| Vol 24, No 1 (2022) |
DESIGNING A MULTI-LAYER TiAlN-TiN-TiAlN COATING WITH HIGH TRIBOLOGICAL PROPERTIES |
|
|
Soshina T.O., Plysnina V.A., Soshina O.I. |
| Vol 19, No 3 (2017) |
INVESTIGATION OF PHYSICAL MECHANICAL PROPERTIES AND TEMPERATURES OF PHASE TRANSFORMATIONS OF POWDER FE-Ni ALLOYS |
|
|
Oglezneva S.A., Saenkov K.L., Grevnov L.M. |
| Vol 21, No 3 (2019) |
MICROSTRUCTURE and PROPERTIES of ALLOYS with SHAPE MEMORY EFFECTS BASED on NI-Mn INTERMETALLIDE DOPED with Ti, Al, Ga and Fe |
|
|
Belosludtseva E.S., Pushin A.V., Svirid A.E., Pushin V.G., Tolmachev T.P. |
| Vol 18, No 1 (2016) |
Investigation of the structure and properties of materials Cu-Ti3SiC2 of tool-electrode for electrical discharge machining |
|
|
Oglezneva S.A., Gilev V.G., Ogleznev N.D. |
| Vol 19, No 3 (2017) |
Antifriction epoxy materials filled with activated wollastonite |
|
|
Gotlib E.M., Galimov E.R., Khasanova A.R., Yamaleeva E.S. |
| Vol 21, No 3 (2019) |
THE STUDY OF TRANSFORMATIONS, STRUCTURE AND PROPERTIES OF STEEL 12Kh3G2МFS AFTER QUENCHING FROM INTER-CRITICAL TEMPERATURE INTERVAL |
|
|
Poduzov D.P., Simonov Y.N., Yurchenko A.N. |
| Vol 18, No 1 (2016) |
THE INFLUENCE OF THE CONTINUOUS COOLING AND OF THE AUSTEMPERING ON A MICROSTRUCTURE AND OF MECHANICAL PROPERTIES IN STEELS 17Cr2Mn2Si2MoV AND 29Cr2Mn2Si2MoV |
|
|
Iurchenko A.N., Simonov I.N., Mikriukov M.I. |
| Vol 19, No 4 (2017) |
INFLUENCE OF PARAMETERS OF MELTING ATOMIZING TECHNOLOGICAL CHARACTERISTICS OF THE POWDER OF THE BRAND 12X18H10T |
|
|
Oglezneva S.A., Smetkin A.A., Mitin V.I., Kalinin K.V. |
| Vol 14, No 3 (2012) |
DETERMINATION OF THE HARDNESS OF COMPOSITE MATERIALS BASED ON THE EXPANDED GRAPHITE |
|
|
Karavaev D.M., Bezmaternykh V.C., Moskalev V.A., Makarova L.E. |
| Vol 22, No 1 (2020) |
Development of recommendations to improve the melting of the melchior alloy mark MN19 |
|
|
Kochetkova Y.A., Tsepelev V.S., Vyukhin V.V., Konashkov V.V., Povodator A.M. |
| Vol 18, No 1 (2016) |
DEFORMATION AND THERMAL PHENOMENA IN THE CUTTING METAL THERMOFRICTIONAL ZONE |
|
|
Kravchenko O.S., Pokintelitsa N.I. |
| Vol 20, No 1 (2018) |
EXPERIMENTAL DETERMINATION OF SURFACE TENSIONS AND KINEMATIC VISCOSITY OF MELTS OF STEEL TUBES IN CONDITIONS OF JSC "VYKSUNSK METALLURGICAL PLANT" |
|
|
Somov S.A., Tsepelev V.S., Konashkov V.V., Vyukhin V.V., Taushkanova A.I. |
| Vol 16, No 3 (2014) |
FEATURES OF CRYSTALLIZATION OF WELDED SEAMS FROM DIVERSE MATERIALS AT ELECTRON BEAM WELDING ON THE EXAMPLE OF HIGHLY CHROMIC STEEL WITH BRONZE |
|
|
Olshanskaya T.V. |
| Vol 18, No 2 (2016) |
INVESTIGATION OF THE EFFECT OF GRAIN SIZE AUSTENITE ON PHASE TRANSFORMATION TEMPERATURE IRON-BASED ALLOYS |
|
|
Oglezneva S.A., Saenkov K.L. |
| Vol 20, No 2 (2018) |
Method for calculating the stress-strain state of the profiles of the globoid chord and the rotor of the positive displacement motor in the zone of their working contact |
|
|
Spirin V.A., Makarov V.F., Khalturin O.A. |
| Vol 16, No 4 (2014) |
THE POSSIBILITY OF MULTILAYER METALLIC MATERIALS FOR THE MANUFACTURE OF HIGH PRESSURE CYLINDERS |
|
|
Plokhikh A.I. |
| Vol 22, No 4 (2020) |
Determination of the influence of the aluminum content and phase composition, structure and structure, thermal stresses in multilayer Zr1-xAlxN coatings on their tribological, heat-resistant, crack-resistant and adhesion properties |
|
|
Kameneva A.L., Klochkov A.Y., Kameneva N.V., Stepanov S.A. |
| Vol 18, No 2 (2016) |
Method of determination of durability of a portion of ferromagnetic abrasive filler in magnetic abrasive polishing |
|
|
Kungurov D.A. |
| Vol 20, No 2 (2018) |
Improving the quality of the surfaces of products obtained by electrical discharge machining using electrolytic-plasma polishing technology |
|
|
Ablyaz T.R., Muratov K.R., Kochergin E.U., Shakirzanov T.V. |
| Vol 16, No 4 (2014) |
NCREASE IN IMPACT STRENGTH OF STRUCTURAL STEELS BY THE CARBIDE-FREE-BAINITE FORMATION |
|
|
Kaletin A.Y., Kaletina Y.V. |
| Vol 22, No 4 (2020) |
Thermokinetic analysis of phase composition of welds aluminum alloy 1420 system Al-Mg-Li. Part 1. Thermokinetic analysis of phase composition of alloy 1420 |
|
|
Fedoseeva E.M., Olshanskaya T.V. |
| Vol 18, No 2 (2016) |
The methods of influence on the structure and properties of aluminum alloys used in the aerospace industry |
|
|
Dolgopolov V.G., Dubrovskii V.A., Simonov M.I., Simonov I.N., Iurchenko A.N., Shibanova K.A. |
| Vol 20, No 4 (2018) |
STRUCTURE AND PROPERTIES OF POWDERS FORMED IN Ni-Fe-Ti SYSTEMS WITH MECHANO-ACTIVATED SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS |
|
|
Ilyushchenko A.F., Letsko A.I., Talako T.L., Dyachkova L.N., Parnitsky N.M. |
| Vol 17, No 1 (2015) |
EFFECT ALUMINIUM ELECTRO-SPARK TECHNOLOGICAL DEPOSIT AND TEMPERINGS TEMPERATURE ON MICROSTRUCTURE AND PROPERTIES LOW-CARBON, LOW-ALLOYED WELD |
|
|
Trekin G.E., Shevchenko O.I. |
| Vol 23, No 2 (2021) |
Thermokinetic analysis of phase composition of welds aluminum alloy 1420 system Al-Mg-Li. Part 2. Thermokinetic analysis of phase composition of the weld made with AMg-6 wire |
|
|
Fedoseeva E.M., Olshanskaya T.V. |
| Vol 18, No 3 (2016) |
Structure and mechanical properties of low-carbon martensitic steels hardened from a temperature the critical interval and after isothermal tempering |
|
|
Berezin S.K. |
| Vol 20, No 4 (2018) |
INFLUENCE OF nanodispersed poWders OF CARBON TO THE STRUCTURE AND PROPERTIES OF POWDER STEEL by SPS |
|
|
Oglezneva S.A., Kulikova A.A., Grevnov L.M., Ogleznev N.D. |
| Vol 17, No 2 (2015) |
Austenite grain growth during heating type steel H3G3MFS And HN3MFS |
|
|
Abrosimova A.A., Panov D.O., Simonov Y.N. |
| Vol 23, No 2 (2021) |
Influence of current frequency during pulse layer plasma surface on the structure and properties of high-alloy steel during additive formation of products |
|
|
Dushina A.Y., Olshanskaya T.V., Neulybin S.D., Shchitsyn Y.D., Nikulin R.G. |
| Vol 18, No 3 (2016) |
MICROSTRUCTURAL FEATURES, MECHANICAL PROPERTIES AND HEAT TREATMENT OF BAINITIC STEEL |
|
|
Yurchenko A.N., Simonov Y.N. |
| Vol 17, No 2 (2015) |
RESEARCH problems machining HIGH STRENGHT composite materials used for the production of details of aviation and space-rocket technicians |
|
|
Makarov V.F., Meshkas A.E., Shirinkin V.V. |
| Vol 23, No 3 (2021) |
ABOUT INFLUENCE OF PLASMA SURFACE SCHEMES ON THE FORMATION OF THE STRUCTURE AND PROPERTIES OF TITANIUM ALLOY |
|
|
Akulova S.N., Myshkina A.V., Varushkin S.V., Neulybin S.D., Krivonosova E.A., Shchitsyn Y.D., Olshanskaya T.V. |
| Vol 18, No 4 (2016) |
INFLUENCE OF TEMPERING ON THE PROPERTIES OF CARBIDE-FREE-BAINITE STEELS |
|
|
Kaletin A.Y., Kaletina Y.V., Simonov Y.N. |
| Vol 21, No 2 (2019) |
USE OF PLASMA SURFACE FOR ADDITIVE FORMATION OF ALUMINUM ALLOYS BLADE |
|
|
Shchitsin Y.D., Krivonosova E.A., Neulubin S.D., Olshanskaya T.V., Nikulin R.G., Fedoseeva E.M., Terentyev S.A. |
| Vol 23, No 3 (2021) |
RESEARCH OF STRUCTURE AND PROPERTIES OF STEEL 25MN2SI |
|
|
Olshanskaya T.V., Fedoseeva E.M. |
| Vol 19, No 1 (2017) |
Railway wheel rim mechanical properties heterogeneity accounting in the problem of contact interaction between wheel and rail |
|
|
Kuzmitskiy Y.O., Shevchenko D.V. |
| 1 - 41 of 41 Items |
|
