| Issue |
Title |
| Vol 21, No 1 (2019) |
HEAT PHENOMENA AND THEIR INFLUENCE ON ENERGY AND FORCE PARAMETERS OF THE THERMOFRICTIONAL HARDENING |
|
|
Pokintelitsa N.I., Levchenko E.A. |
| Vol 21, No 3 (2019) |
THE INFLUENCE OF LASER TREATMENT OF POWDER STEEL PA-ZHGR ON THE GEOMETRIC PARAMETERS OF THE LASER EXPOSURE ZONE |
|
|
Usynin E.V., Oglezneva S.A., Morozov E.A. |
| Vol 21, No 2 (2019) |
Definition of temperature indicators by modeling the process of globoid toothohoning depending on the parameters of the hone installation |
|
|
Spirin V.A., Makarov V.F., Khalturin O.A. |
| Vol 17, No 2 (2015) |
Determination of voltage drop across the anode area arc plasma processing of metals |
|
|
Schitcyn Y.D., Belinin D.S., Neulybin S.D., Gilev I.A., Panov A.I. |
| Vol 21, No 4 (2019) |
THE INFLUENCE OF LASER EXPOSURE ON THE STATE OF HARDENED HIGH-SPEED STEEL Р6М5 |
|
|
Tokarev D.I., Drozdov A.A., Morozov E.A., Ablyaz T.R., Ivanova Y.S., Polezhaev I.S. |
| Vol 17, No 3 (2015) |
Plasma welding of aluminum alloys when two arc plasma torch at current reverse polarity |
|
|
Shchitsyn I.D., Gilev I.A., Belinin D.S., Neulybin S.D., Bazhenov A.M. |
| Vol 19, No 1 (2017) |
THE MATHEMATICAL ANALYSIS OF GROWTH OF NONMETALLIC INCLUSIONS IN THE WELDING BATH |
|
|
Olshanskaya T.V., Fedoseeva E.M. |
| Vol 21, No 1 (2019) |
Features of structure formation of heat-resistant weld metal based on Ni3Al |
|
|
Zorin I.V., Sokolov G.N., Lysak V.I., Dubcov U.N., Denisevich D.S., Fastov S.A. |
| Vol 22, No 3 (2020) |
Investigation of the effect of granule crystallization rates on the strength characteristics of pressed semi-finished aluminum alloys of the Al-Cu-Mg system |
|
|
Zharov M.V. |
| Vol 22, No 4 (2020) |
Influence of zirconium on specific heat capacity and changes in thermodynamic functions zinc alloy Zn55Al |
|
|
Ganiev I.N., Aliev J.N., Aminov F.M. |
| Vol 16, No 4 (2014) |
FORMATION OF MICROSTRUCTURE AND PROPERTIES OF THE COMPOSITION "HARDFACING LAYER-BASE METAL" IN THE ULTRASONIC WAVE |
|
|
Shevchenko O.I., Trekin G.E. |
| Vol 21, No 2 (2019) |
Research of weldability of pipe steel X65QS ordered for sour service |
|
|
Khudyakov A.O., Korobov Y.S., Danilkin P.A. |
| Vol 18, No 3 (2016) |
TEMPERATURE DISTRIBUTION IN THE COOLING OF PARTS RESTRICTED BY THE SURFACES IN THE FORM OF PARALLELEPIPED AND ELLIPTIC CYLINDER |
|
|
Rasulov S.R., Ibragimov V.A., Karimov J.A. |
| Vol 23, No 3 (2021) |
Requirements for the arc welding parameters accuracy of a butt joint on an aluminum alloy |
|
|
Sidorov V.P., Melzitdinova A.V., Sovetkin D.E. |
| Vol 20, No 3 (2018) |
CREATION OF MODELS OF THE SOLUTION OF THERMAL PROBLEMS OF ELECTRON BEAM WELDING WITH FLUCTUATIONS OF THE BEAM |
|
|
Olshanskaya T.V., Fedoseeva E.M. |
| Vol 17, No 2 (2015) |
Development of advanced manufacturing technology PARTS OIL PUMP |
|
|
Morozov S.A., Morozov A.S. |
| Vol 18, No 4 (2016) |
Review of modern methods of management of the electron beam when the electron-beam welding |
|
|
Olshanskaya T.V., Salomatova E.S. |
| Vol 20, No 3 (2018) |
Penetration control for welding on analytical mathematical model of heat distribution |
|
|
Sidorov V.P., Melzitdinova A.V. |
| Vol 18, No 4 (2016) |
Comparative analysis of different models of the insulating polymer flow in the extruder screw channel |
|
|
Ershov S.V., Trufanova N.M., Lukin M.D. |
| Vol 20, No 3 (2018) |
Application of high-frequency induction heating for increasing crack resistance in the welding of hardening steels |
|
|
Orlov A.S., Pomerantsev A.S., Sizintsev S.V. |
| Vol 17, No 3 (2015) |
Development of prefabricated structures broaching tool for high-speed broaching shaft of the compressor blades of the cut material |
|
|
Makarov V.F., Petukhov G.D. |
| Vol 22, No 2 (2020) |
The use of a metal insert in the core to control the solidification speed of the casting |
|
|
Sharov K.V., Bogomyagkov A.V., Pustovalov D.O., Shumkov A.A., Merkusheva L.M., Nikitin N.E. |
| Vol 18, No 4 (2016) |
INFLUENCE OF SPEED OF COOLING ON FORMATION OF STRUCTURE OF A RAIL STEEL MICROALLOYED BY VANADIUM AND NIOBIUM |
|
|
Polevoy E.V., Dobuzhskaya A.B., Temlyantsev M.V. |
| Vol 20, No 4 (2018) |
Technological recommendations about laser heat threatmens of powder pseudo-alloy FeC1Cu15 |
|
|
Morozov E.A., Oglezneva S.A. |
| Vol 22, No 2 (2020) |
Simulation of the microstructure of aluminum bronze CuAlFe 9-4 providing increased resistance to wear |
|
|
Svyatkin A.V., Popova L.I., Shenderei P.E. |
| Vol 17, No 3 (2015) |
Improved corrosion resistance machine parts |
|
|
Platonova E.S. |
| Vol 22, No 2 (2020) |
Effective power of direct polarity arc with non-consumable electrode |
|
|
Sidorov V.P., Sovetkin D.E., Melzitdinova A.V. |
| Vol 19, No 2 (2017) |
KINETICS OXIDATION OF COMPOSITE MATERIAL ON THE BASIS OF TITANIUM SILICON CARBIDE AT THE HIGH TEMPERATURES |
|
|
Smetkin A.A., Kachenyuk M.N., Majorova Y.K., Lozhkina Y.A. |
| Vol 17, No 4 (2015) |
Properties of materials based on the MAX-phases (Rеview) |
|
|
Smetkin A.A., Maiorova I.K. |
| Vol 22, No 3 (2020) |
Application of the normalized diagram to simulate additive surfacing using energy beam sources |
|
|
Letyagin I.Y., Trushnikov D.N., Belenkiy V.Y., Erikov A.P., Olshanskaya T.V. |
| Vol 19, No 3 (2017) |
Comparative analysis of different models of the insulating polymer flow in the extruder screw channel |
|
|
Ershov S.V., Trufanova N.M., Lukin M.D. |
| Vol 15, No 1 (2013) |
Electron beam welding: from invention to OF OUR DAYS |
|
|
Salomatova E.S. |
| Vol 21, No 2 (2019) |
Influence of temperature and time of thermal processing on the structure of enamel coating |
|
|
Soshina T.O., Mukhamadyarova V.R. |
| Vol 17, No 4 (2015) |
Corrosion of the heatexchange equipment of petrochemical productions |
|
|
Bolotova I.V., Ruchkinova O.I. |
| Vol 22, No 3 (2020) |
About formation of defects in quartz glass granules based on tetraethoxysilane |
|
|
Vozyakov A.O., Porozova S.E. |
| Vol 19, No 3 (2017) |
TO THE PROBLEM OF CORROSION DESTRUCTION OF WELDED JOINTS |
|
|
Krivonosova E.A., Akulova S.N., Myshkina A.V. |
| Vol 15, No 1 (2013) |
THE USE OF COMBINATION FEED GASES TO INCREASE THE THERMAL EFFICIENCY OF THE PLASMA PROCESSES |
|
|
Shitcin Y.D., Sinani I.L., Belinin D.S., Kuchev P.S., Neulybin S.D. |
| Vol 21, No 2 (2019) |
Selection of the main criteria of the thermal cycle for the predicting methods of the structure of welds at electron-beam welding |
|
|
Olshanskaya T.V., Fedoseeva E.M. |
| Vol 18, No 1 (2016) |
THE INFLUENCE OF THE CONTINUOUS COOLING AND OF THE AUSTEMPERING ON A MICROSTRUCTURE AND OF MECHANICAL PROPERTIES IN STEELS 17Cr2Mn2Si2MoV AND 29Cr2Mn2Si2MoV |
|
|
Iurchenko A.N., Simonov I.N., Mikriukov M.I. |
| Vol 19, No 4 (2017) |
THE INFLUENCE OF PLASMA TREATMENT REGIMES ON THE DISTRIBUTION OF NONMETALLIC INCLUSIONS IN STEEL |
|
|
Myshkina A.V., Akulova S.N., Krivonosova E.A., Shchitsyn I.D., Sinani I.L. |
| Vol 16, No 1 (2014) |
SYNTHESIS AND PROPERTIES OF NANOPOWDER OF TITANIA FOR RECEIVING FUNCTIONAL MATERIALS |
|
|
Gurov A.A., Karmanov V.I., Porozova S.E., Shokov V.O. |
| Vol 18, No 2 (2016) |
MECHANICAL AND STRUCTURAL MICROINHOMOGENEITY OF WELDED COMPOUNDS OF X65 STEEL |
|
|
Fedoseeva E.M. |
| Vol 19, No 4 (2017) |
STUDY OF THE PHASE COMPOSITION FORMING PROCESS OF THE COMPOSITE MATERIAL SiO2-ZrO2 |
|
|
Kolobova E.A., Porozova S.E., Vokhmyanin D.S. |
| Vol 16, No 2 (2014) |
FEATURES OF HEAT TRANSFER TO THE PRODUCT WHEN WORKING ON THE PLASMA TORCH CURRENT OF REVERSED POLARITY |
|
|
Shicin Y.D., Belinin D.S., Kuchev P.S., Neulybin S.D. |
| Vol 21, No 2 (2019) |
DIMENSIONAL PARAMETERS OF THE TECHNOLOGICAL PROCESS OF OBTAINING CAST MOLDED CRYSTALLINE MATERIALS OF THE FLUORFLOGOPITA TYPE |
|
|
Ignatova A.M., Yudin M.V., Ignatov M.N. |
| Vol 18, No 3 (2016) |
MICROSTRUCTURAL FEATURES, MECHANICAL PROPERTIES AND HEAT TREATMENT OF BAINITIC STEEL |
|
|
Yurchenko A.N., Simonov Y.N. |
| Vol 23, No 1 (2021) |
Structure of joints of medium-carbon steel after friction welding and surfacing |
|
|
Laptev S.K., Shatsov A.A., Grebenkov S.K. |
| Vol 20, No 2 (2018) |
REDUCTION OF THE DEFECTS OF HEAT-RESISTANT NICKELS ALLOYS IN SURFACING TECHNOLOGIES |
|
|
Krivonosova E.A., Shchitsyn I.D., Akulova S.N., Myshkina A.V., Neulybin S.D., Belinin D.S. |
| 1 - 48 of 48 Items |
|
