ARTICLES
| Issue | Title | Abstract | File |
| No 3 (2020) | About the nonlinear acoustic parameter during deformation of AMG61 alloy | Abstract |
 (Rus) |
| Ilyahinsky A.V., Rodyushkin V.M. | |||
| No 1 (2020) | The Ultimate Load Estimation of Welded Joints of High-Strength Steels subject to Mechanical and Geometric Heterogeneity | Abstract |
(Rus) |
| Sapozhnikov S.B., Ivanov M.A., Shcherbakov I.A. | |||
| No 4 (2020) | Research of the asymmetric rolling of workpieces | Abstract |
(Rus) |
| Ashkeyev Z.A., Andreyachshenko V.A., Bukanov Z.U. | |||
| No 2 (2020) | Investigation of nonlinearity of longitudinal displacement function from mechanical and geometric characteristics of the plate | Abstract |
(Rus) |
| Osadchy N.V., Malyshev V.A., Shepel V.T. | |||
| No 4 (2020) | On modeling of airflow in human lungs: constitutive relations to describe deformation of porous medium | Abstract |
(Rus) |
| Trusov P.V., Zaitseva N.V., Tsinker M.Y. | |||
| No 3 (2020) | Structural failure criterion for spatially-reinforced carbon-carbon composite materials | Abstract |
(Rus) |
| Magnitsky I.V. | |||
| No 1 (2020) | Two methods for calculating the stress-strain state of shape memory alloy constructions taking into account tension-compression asymmetry | Abstract |
(Rus) |
| Stolbova O.S., Tikhomirova K.A. | |||
| No 4 (2020) | Investigation of the Winkler foundation model applicability for describing the contact interaction of elastoplastic shells with a core under external pressure | Abstract |
(Rus) |
| Bazhenov V.G., Nagornykh E.V., Samsonova D.A. | |||
| No 2 (2020) | The grain structure refinement of metals and alloys under severe plastic deformation: experimental data and analysis of mechanisms | Abstract |
(Rus) |
| Ostanina T.V., Shveykin A.I., Trusov P.V. | |||
| No 4 (2020) | Modeling of deformation and fracture of porous media taking into account their morphological composition | Abstract |
(Rus) |
| Shalimov A.S., Tashkinov M.A. | |||
| No 3 (2020) | Diagnostics of impregnation defects of reinforcing filaments of polymer composite with built-in fibre-optic sensor with distributed Bragg grating | Abstract |
(Rus) |
| Pan’kov A.A. | |||
| No 1 (2020) | A Dynamic expansion of a cylindrical cavity in a compressible elastic-plastic medium. The Analysis of medium resistance to dynamic penetration of a sharp-nosed impactor | Abstract |
(Rus) |
| Khasanov A.R. | |||
| No 4 (2020) | Analysis of the fracture toughness parameters at the free edge in layered composites | Abstract |
(Rus) |
| Bondarchuk D.A., Fedulov B.N., Fedorenko A.N., Lomakin E.V. | |||
| No 2 (2020) | The current state and tendencies of using rheological models for self-forming wooden structures | Abstract |
(Rus) |
| Ponomarev V.S., Kashevarova G.G. | |||
| No 4 (2020) | Study Smart-layer effect on the physical and mechanical characteristics of the samples from polymer composite materials under quasi-static loading | Abstract |
(Rus) |
| Shipunov G.S., Baranov M.A., Nikiforov A.S., Golovin D.V., Tihonova A.A. | |||
| No 3 (2020) | Asymptotic stress fields in the vicinity of the crack in perfectly plastic solids under mixed mode loading | Abstract |
(Rus) |
| Stepanova L.V. | |||
| No 1 (2020) | The Refined Model of Viscoelastic-Plastic Deformation of Reinforced Cylindrical Shells | Abstract |
(Rus) |
| Yankovskii A.P. | |||
| No 4 (2020) | The Tree-Level Viscoelastic Model: Analysis of the Influence of the Packing Defect Energy to the Response of Materials under Complex Loading | Abstract |
(Rus) |
| Gribov D.S., Trusov P.V. | |||
| No 2 (2020) | The method of reconstruction of residual stresses and plastic deformations in thin-walled pipelines in the delivery state and after bilateral vibro-shock surface hardening with a shot | Abstract |
(Rus) |
| Radchenko V.P., Pavlov V.P., Berbasova T.I., Saushkin M.N. | |||
| No 4 (2020) | Propagation of non-stationary antisymmetric kinematic perturbations from a spherical cavity in Cosserat medium | Abstract |
(Rus) |
| Tarlakovskii D.V., Nguyen V.L. | |||
| No 1 (2020) | On modeling bodies with delaminating coatings taking into account the fields of prestresses | Abstract |
(Rus) |
| Bogachev I.V., Vatulyan A.O. | |||
| No 3 (2020) | The effect of the angle of «meeting» of fullerite C60 with a solid substrate on the deposition process | Abstract |
(Rus) |
| Suvorov S.V., Severiuchin A.V., Vakhrushev A.V. | |||
| No 1 (2020) | The Refined Plane Mechanical and Mathematical Model Determining Stresses in the Base of the Strip Foundation and Elastic Sediment | Abstract |
(Rus) |
| Abdeev B.M., Brim T.F., Muslimanova G. | |||
| No 4 (2020) | Investigation of damage accumulation and delamination propagation in polymer composite materials based on two-level fracture models | Abstract |
(Rus) |
| Dolgikh D.A., Tashkinov M.A. | |||
| No 2 (2020) | The Dissipative Properties Assessment of the Oscillatory System of a Serial Sample of the Coriolis Flowmeter | Abstract |
(Rus) |
| Romanov V.A., Taranenko P.A. | |||
| No 4 (2020) | Structural elements based on the metamaterials | Abstract |
(Rus) |
| Yurgenson S.A., Lomakin E.V., Fedulov B.N., Fedorenko A.N. | |||
| No 1 (2020) | The Theoretical and experimental study of the bending of a thin substrate during electrolytic deposition | Abstract |
(Rus) |
| Bout D.K., Bychkov P.S., Lychev S.A. | |||
| No 3 (2020) | Fracture resistance parameters for the compressor disk imitation model | Abstract |
(Rus) |
| Yakovlev M.M., Yarullin R.R., Shlyannikov V.N. | |||
| No 2 (2020) | Investigation of the mechanical behavior of a two-phase Mg-Ni compound during fast compression | Abstract |
(Rus) |
| Aptukov V.N., Skryabina N.E., Fruchart D. | |||
| No 4 (2020) | Numerical simulation of deformation and fracture of metal-matrix composites with considering residual stresses | Abstract |
(Rus) |
| Zemlianov A.V., Evtushenko E.P., Balokhonov R.R. | |||
| No 2 (2020) | Nonlinear dynamics and stages of damage of Ti6Al4V and Ti45Nb titanium alloys in very high cycle fatigue | Abstract |
(Rus) |
| Bannikov M.V., Oborin V.A., Bilalov D.A., Naimark O.B. | |||
| No 4 (2020) | Finite element method with account of singularity for mixed mode cracks | Abstract |
(Rus) |
| Tartygasheva A.M., Shlyannikov V.N., Tumanov A.V. | |||
| No 1 (2020) | The Applied model of grinding a spherical solid particle with a direct impact on a non-deformable flat surface | Abstract |
(Rus) |
| Guryanov G.A., Abdeev B.M. | |||
| No 3 (2020) | Numerical algorithm for searching for layouts of electroelastic bodies with external electric circuits for obtaining the best damping properties | Abstract |
(Rus) |
| Iurlova N.A., Oshmarin D.A., Sevodina N.V., Iurlov M.A. | |||
| No 2 (2020) | Modeling the processes of atom structure formation of a superconducting spin valve | Abstract |
(Rus) |
| Vakhrushev A.V., Fedotov A.Y., Savva Y.B., Sidorenko A.S. | |||
| No 4 (2020) | On a modeling stress-controlled surface growth of solids | Abstract |
(Rus) |
| Izmaylova Y.O., Freidin A.B. | |||
| No 3 (2020) | Solving the problems of strength and destruction of materials and structural elements using a complex experimental-theoretical approach | Abstract |
(Rus) |
| Bragov A.M., Konstantinov A.Y., Lomunov A.K., Basalin A.V. | |||
| No 4 (2020) | Experimental determination and finite element analysis of coefficients of the multi-parameter Williams series expansion in the vicinity of the crack tip in linear elastic materials. Part I | Abstract |
(Rus) |
| Stepanova L.V. | |||
| No 1 (2020) | The Nonlinear evolutionary problem for self-stressed multilayered hyperelastic spherical bodies | Abstract |
(Rus) |
| Lychev S.A., Lycheva T.N., Koifman K.G. | |||
| No 3 (2020) | Limit states and safety factors under repeated loading | Abstract |
(Rus) |
| Chernyavsky O.F., Chernyavsky A.O. | |||
| No 2 (2020) | A variant of the thermoplasticity theory for monotonic and cyclic processes of nonisothermal loads | Abstract |
(Rus) |
| Bondar V.S., Abashev D.R., Fomin D.Y. | |||
| No 4 (2020) | Inelastic behavior and destruction of materials under isothermal and non-isothermal, simple and complex loads | Abstract |
(Rus) |
| Bondar V.S., Abashev D.R. | |||
| No 3 (2020) | About mixed forced, parametric and self-oscillations by limited excitation and delayed elasticity | Abstract |
(Rus) |
| Alifov A.A. | |||
| No 4 (2020) | The influence of surface effects in the problem of theory of elasticity for a circular hole in a half-plane | Abstract |
(Rus) |
| Gandilyan D.V. | |||
| No 1 (2020) | The limit state of concrete and reinforced concrete rods at complex and longitudinal-transverse bending | Abstract |
(Rus) |
| Nemirovskii Y.V., Tikhonov S.V. | |||
| No 3 (2020) | Models of hydrogen influence on the mechanical properties of metals and alloys | Abstract |
(Rus) |
| Yakovlev Y.A., Polyanskiy V.A., Sedova Y.S., Belyaev A.K. | |||
| No 4 (2019) | In memoriam | Abstract |
(Rus) |
| Вестник ПНИПУ. М. | |||
| No 2 (2019) | The Contact Problem Solution of the Elasticity Theory for Anisotropic Rotation Bodies with Mass Forces | Abstract |
(Rus) |
| Ivanychev D.A. | |||
| No 4 (2019) | The Torsion Problem of a Cylindrical Solid Taking Into Account the Material Weakening | Abstract |
(Rus) |
| Wildemann V.E., Mugatarov A.I. | |||
| No 1 (2019) | Development of the Digital Image Correlation Method to Study Deformation and Fracture Processes of Structural Materials | Abstract |
(Rus) |
| Lyubutin P.S., Panin S.V., Titkov V.V., Eremin A.V., Sunder R. | |||
| No 2 (2019) | Modeling of Strands Formation in Elastomeric Composites | Abstract |
(Rus) |
| Sokolov A.K., Garishin O.K., Svistkov A.L. | |||
| No 4 (2019) | New analytical solutions for vibration problem of thick plates | Abstract |
(Rus) |
| Papkov S.O. | |||
| No 3 (2019) | About Electrical Conductivity of the Epoxy Matrix with Carbon Nanotubes | Abstract |
(Rus) |
| Semenov V.A., Rusakov S.V., Gilev V.G. | |||
| No 2 (2019) | Research methods of structural and phase transformations in nanomaterials deformed under pressure | Abstract |
(Rus) |
| Vasil’ev L.S., Lomaev S.L. | |||
| No 4 (2019) | Nonstationary 1D Dynamics Problems for Heteromodular Elasticity with Piecewise-Linear Approximation of Boundary Conditions | Abstract |
(Rus) |
| Dudko O.V., Lapteva A.A., Ragozina V.E. | |||
| No 1 (2019) | Identification of elastic parameters of composite using experimental data on modal characteristics of samples | Abstract |
(Rus) |
| Nikhamkin M.S., Solomonov D.G., Silberschmidt V.V. | |||
| No 2 (2019) | Method of calculation of elastic effective properties of two-phase polydisperse media using multipoint statistical descriptors and the integral equations technique | Abstract |
(Rus) |
| Tashkinov M.A. | |||
| No 4 (2019) | Experimental analysis of the effect of discrete aggregate on the bending stability of thin-walled cylindrical shells | Abstract |
(Rus) |
| Petrov M.V. | |||
| No 3 (2019) | Simulation of the interaction fullerite C60 with the substrate solids | Abstract |
(Rus) |
| Suvorov S.V., Severiuchin A.V., Vakhrushev A.V. | |||
| No 2 (2019) | An asymptotic Solution of the Hypersingular Boundary Integral Equation Simulating Wave Scattering by the Interface Strip-Like Crack | Abstract |
(Rus) |
| Doroshenko O.V., Kirillova E.V., Fomenko S.I. | |||
| No 4 (2019) | Energy product in a crack-like defect model under loading of mode II type | Abstract |
(Rus) |
| Glagolev V.V., Glagolev L.V., Markin A.A. | |||
| No 1 (2019) | Lifetime of AMg6 Alloy under Consecutive Shock-Wave and Gigacycle Loading | Abstract |
(Rus) |
| Oborin V.A., Bannikov M.V., Bayandin Y.V., Naimark O.B. | |||
| No 2 (2019) | Modeling the Dynamic Behavior of Spatially Reinforced Plates of Nonlinear Elastic Materials within the Refined Bending Theory | Abstract |
(Rus) |
| Yankovskii A.P. | |||
| No 4 (2019) | Identification of crack-like defect and investigation of stress concentration in coated bar | Abstract |
(Rus) |
| Sobol B.V., Soloviev A.N., Rashidova E.V., Vasiliev P.V. | |||
| No 3 (2019) | Buckling Problem of Composite Thin-Walled Structures with Properties Dependent on Loading Types | Abstract |
(Rus) |
| Fedorenko A.N., Fedulov B.N., Lomakin E.V. | |||
| No 2 (2019) | Plastic stress intensity factor in fracture mechanics | Abstract |
(Rus) |
| Zakharov A.P., Shlyannikov V.N., Ishtyryakov I.S. | |||
| No 4 (2019) | About a new approach to calculating spiral clamps | Abstract |
(Rus) |
| Danilin A.N., Zhavoronok S.I., Rabinsky L.N. | |||
| No 1 (2019) | A System Development for Monitoring Kinetic Parameters of a Phase Transition in a Fluid-Saturated Soil Based on Fiber Optic Sensors | Abstract |
(Rus) |
| Prokhorov A.E., Plekhov O.A. | |||
| No 3 (2019) | Simulation of Metal Powder Bidirectional Compression in a Pressing Tool with a Floating Die | Abstract |
(Rus) |
| Berezin I.M., Zalazinskii A.G., Nesterenko A.V., Bykova T.M. | |||
| No 4 (2019) | Elastoplastic interaction of grains in polycrystalline materials | Abstract |
(Rus) |
| Tashkinov A.A., Shavshukov V.E. | |||
| No 3 (2019) | Simulation of residual stresses during pulsed thermo-force surface hardening | Abstract |
(Rus) |
| Bagmutov V.P., Denisevich D.S., Zakharov I.N., Romanenko M.D., Fastov S.A. | |||
| No 1 (2019) | The Effect of Preliminary Plastic Hardening by Tension on the Cylindrical Shells Buckling during Torsion | Abstract |
(Rus) |
| Bazhenov V.G., Zhegalov D.V., Kazakov D.A., Kibec A.I., Nagornykh E.V., Samsonova D.A. | |||
| No 2 (2019) | Mixed Form Equations for Ribbed Shells of a General Type And Their Solutions | Abstract |
(Rus) |
| Karpov V.V. | |||
| No 4 (2019) | Creation and verification of computational models for analysis of the mechanical behaviour of jet engines composite components under high-velocity impact: main problems and basic recommendations | Abstract |
(Rus) |
| Kudryavtsev O.A., Zhikharev M.V., Olivenko N.A. | |||
| No 1 (2019) | Mathematical modeling of the stress-strain state in surface hardened thin-walled tubes with regard to the residual shear stresses | Abstract |
(Rus) |
| Radchenko V.P., Pavlov V.P., Saushkin M.N. | |||
| No 3 (2019) | The Analysis of residual stresses in layered composites with [0°/90°] layup | Abstract |
(Rus) |
| Bondarchuk D.A., Fedulov B.N., Fedorenko A.N., Lomakin E.V. | |||
| No 4 (2019) | Non-stationary coupled axisymmetric thermoelasticity problem for a rigidly fixed round plate | Abstract |
(Rus) |
| Shlyakhin D.A., Dauletmuratova Z.M. | |||
| No 3 (2019) | A Review of some non-traditional applications of the engineering theory of high-speed penetration | Abstract |
(Rus) |
| Dubinsky A.V. | |||
| No 1 (2019) | On Predicting Material and Structural Resources under Cyclic Loading | Abstract |
(Rus) |
| Bondar V.S., Abashev D.R., Petrov V.K. | |||
| No 2 (2019) | Analysis of Dynamic Characteristics of a Contact Interaction of Solids Using Computational Software | Abstract |
(Rus) |
| Maksimenko A.A., Koteneva N.V., Perfilieva N.V., Borisova A.D. | |||
| No 4 (2019) | Numerical study of the influence of gaps between tiles and backing type on overall high-velocity impact performance of a ceramic-faced protective structure | Abstract |
(Rus) |
| Kudryavtsev O.A., Sapozhnikov S.B., Zhikharev M.V. | |||
| No 1 (2019) | The Influence of Stress Concentrators on the Magnesium Alloy Mechanical Behavior under Deformation at High Strain Rates in the Temperature Range from 295 to 673 K | Abstract |
(Rus) |
| Skripnyak V.A., Skripnyak V.V., Kozulin A.A., Iohim K.V. | |||
| No 3 (2019) | The Assessment of Fatigue Durability and Critical Plane Determination for Multiaxial Cyclic Loading at an Arbitrary Shift of Phases | Abstract |
(Rus) |
| Burago N.G., Nikitin I.S., Nikitin A.D., Stratula B.A. | |||
| No 3 (2019) | The Structure of Interfacial Regions in Polymer Nanocomposites | Abstract |
(Rus) |
| Dyshin O.A., Habibov I.A., Shamilov V.M., Rustamova K.B. | |||
| No 1 (2019) | Experimental study of postcritical deformation and failure of steels at high temperature | Abstract |
(Rus) |
| Wildemann V.E., Tretyakov M.P. | |||
| No 2 (2019) | Dynamics of a Viscoelastic Plate Carrying Concentrated Mass with Account of Physical Nonlinearity of Material. Part 1. Mathematical Model, Solution Method and Computational Algorithm | Abstract |
(Rus) |
| Mirsaidov M.M., Abdikarimov R.A., Khodzhaev D.A. | |||
| No 4 (2019) | Analysis of models for porosity evolution in reservoir during steam injection | Abstract |
(Rus) |
| Kostina A.A., Zhelnin M.S., Plekhov O.A. | |||
| No 1 (2019) | Evaluation of the Damage Degree to Carbon-Fiber Composite Materials under Impact | Abstract |
(Rus) |
| Staroverov O.A., Babushkin A.V., Gorbunov S.M. | |||
| No 3 (2019) | Inverse coefficient problems in mechanics | Abstract |
(Rus) |
| Vatulyan A.O., Plotnikov D.K. | |||
| No 2 (2019) | Description of the Effect of AlMg6 Alloy Strength Decrease during Temperature Increase under Dynamic Loading | Abstract |
(Rus) |
| Bilalov D.A., Sokovikov M.A., Bayandin Y.V., Chudinov V.V., Oborin V.A., Naimark O.B. | |||
| No 3 (2019) | The Phenomenological Model of Hyper Viscoelasticity of Elastomers with a Constant Orientation of the Main Stress Axes in the Accompanying Frame of Reference | Abstract |
(Rus) |
| Korneyev V.S., Korneyev S.A. | |||
| No 1 (2019) | Application of the Acoustic Emission Technique to Studying the Damage Accumulation in a Functional Ceramic Coating | Abstract |
(Rus) |
| Zubova E.M., Lobanov D.S., Strungar E.M., Wildemann V.E., Lyamin Y.B. | |||
| No 2 (2019) | Deformation model of a five-layer panel with a hard filler | Abstract |
(Rus) |
| Osadchy N.V., Malyshev V.A., Shepel V.T. | |||
| No 4 (2019) | Numerical modeling of nonlinear dynamic and static compression of the metal mesh | Abstract |
(Rus) |
| Kochetkov A.V., Modin I.A., Leontev N.V., Turigina I.A., Poverennov E.Y. | |||
| No 1 (2019) | Comprehensive analysis of mechanical behavior and fracture processes of specimens of three-dimensional reinforced carbon fiber in tensile tests | Abstract |
(Rus) |
| Tretyakova T.V., Dushko A.N., Strungar E.M., Zubova E.M., Lobanov D.S. | |||
| No 3 (2019) | Construction of Multigrid Finite Elements to Calculate Shells, Plates and Beams Based on Generating Finite Elements | Abstract |
(Rus) |
| Matveev A.D. | |||
| No 2 (2019) | The Investigation of the Initial Stress-Strain State Influence on Mechanical Properties of Viscoelastic Bodies | Abstract |
(Rus) |
| Bogachev I.V., Vatulyan A.O., Dudarev V.V., Nedin R.D. | |||
| No 3 (2019) | The Stressed state of the double-layer rectangular plate under shift. The Simplified two-dimensional model | Abstract |
(Rus) |
| Kurennov S.S., Barakhov K.P. | |||
| No 1 (2019) | Autowave mechanics of metal plasticity | Abstract |
(Rus) |
| Zuev L.B., Barannikova S.A. | |||
| No 2 (2019) | Filtration in Fluid-Saturated Poro-Plastic MaterialS during Lateral Extrusion | Abstract |
(Rus) |
| Sevastyanov G.M. | |||
| 301 - 400 of 737 Items | << < 1 2 3 4 5 6 7 8 > >> | ||