ARTICLES
| Issue | Title | Abstract | File |
| No 4 (2017) | Numerical solution for an inverse problem about determination of volumetric heat capacity of rock mass during artificial freezing | Abstract |
 (Rus) |
| Zhelnin M.S., Plekhov O.A., Semin M.A., Levin L.Y. | |||
| No 2 (2017) | Modeling of the cross-section ovality of single crystal nickel-based superalloy samples under tension | Abstract |
(Rus) |
| Semenov A.S., Beliaev M.O., Grishchenko A.I. | |||
| No 4 (2017) | The Stress-Strain State and Failure of Structural Elements with Sharp Stress Concentrators under Bending | Abstract |
(Rus) |
| Sapozhnikov S.B., Ivanov M.A., Yaroslavtsev S.I., Shcherbakov I.A. | |||
| No 1 (2017) | Experimental studies of the high temperature influence on strength and deformation properties of combined glass organoplastics | Abstract |
(Rus) |
| Lobanov D.S., Babushkin A.V. | |||
| No 3 (2017) | Modeling of dynamic bending of a rigid-plastic reinforced layered curvilinear plate with a supported circular hole under explosive loads | Abstract |
(Rus) |
| Romanova T.P. | |||
| No 4 (2017) | Aramid fabric surface treatment and its impact on the mechanics of yarn’s frictional interaction | Abstract |
(Rus) |
| Ignatova A.V., Dolganina N.Y., Sapozhnikov S.B., Shabley A.A. | |||
| No 1 (2017) | Expansion of a cylindrical cavity in a compressible elastic-plastic medium | Abstract |
(Rus) |
| Aptukov V.N., Khasanov A.R. | |||
| No 4 (2017) | Modeling of the product termomechanical behavior during 3D deposition of wire materials in ANSYS | Abstract |
(Rus) |
| Smetannikov O.Y., Trushnikov D.N., Maksimov P.V., Bartolomey M.L., Kovyazin A.V. | |||
| No 1 (2017) | Numerical and experimental study of composite bulkhead partition strength with in-situ x-ray monitoring | Abstract |
(Rus) |
| Potrahov N.N., Anoshkin A.N., Zuiko V.Y., Osokin V.M., Pisarev P.V., Pelenev K.A. | |||
| No 2 (2017) | Modelling the generation of new material surfaces in a composite with an adhesion layer under cohesive destruction | Abstract |
(Rus) |
| Glagolev V.V., Markin A.A., Fursaev A.A. | |||
| No 4 (2017) | Modeling the dynamic penetration processes of dimensional bodies in a compressible elastoplastic medium | Abstract |
(Rus) |
| Linnik E.Y., Kotov V.L., Konstantinov A.Y. | |||
| No 2 (2017) | Studying the energy distribution of the dynamic influences of road transport on the layers of nonrigid pavements | Abstract |
(Rus) |
| Tiraturyan A.N., Uglova E.V., Lyapin A.A. | |||
| No 3 (2017) | Direct and inverse problems of pipeline bending | Abstract |
(Rus) |
| Ilgamov M.A., Yulmukhametov A.A. | |||
| No 1 (2017) | Serrated yielding: crystal viscoplastic models | Abstract |
(Rus) |
| Trusov P.V., Chechulina E.A. | |||
| No 3 (2017) | STATE EQUATIONS OF THE DRAPH MODEL OF THREE-DIMENSIONAL ELASTIC SOLIDS IN CARTESIAN COORDINATES | Abstract |
(Rus) |
| Tyrymov A.A. | |||
| No 3 (2017) | Processing fine magnesium materials. Numerical simulation and experimental analyses | Abstract |
(Rus) |
| Aptukov V.N., Romanov P.V., Skryabina N.E., Fruchart D. | |||
| No 1 (2017) | Influence of the state of faults in lithospheric plates on the starting earthquake | Abstract |
(Rus) |
| Babeshko V.A., Evdokimova O.V., Babeshko O.M. | |||
| No 4 (2017) | Theoretical and experimental study of structural elements’ influence of fiber-optic strain sensor on its readings and correction procedure for transfer function | Abstract |
(Rus) |
| Sozonov N.S., Shardakov I.N. | |||
| No 1 (2017) | Dynamic axisymmetric problem of a direct piezoeffect for a round bimorph plate | Abstract |
(Rus) |
| Shlyakhin D.A. | |||
| No 2 (2017) | Boundary value problem of nonsymmetrical deformation of the cylindrical vessel with liquid in the thermal field | Abstract |
(Rus) |
| Gur'jyanov N.G., Tyuleneva O.N. | |||
| No 3 (2017) | Stability of toroidal shell segments at variation of a deflection angle | Abstract |
(Rus) |
| Bakusov P.A., Semenov A.A. | |||
| No 2 (2017) | Computing orthotropic constructions using the variation method based on three-dimensional functions with final carriers | Abstract |
(Rus) |
| Khayrullin F.S., Sakhbiev O.M. | |||
| No 3 (2017) | Thermomechanical boundary problems for a cylinder and sphere made of shape memory alloy | Abstract |
(Rus) |
| Mashikhin A.E., Movchan A.A. | |||
| No 1 (2017) | A stochastic model for the residual stresses calculation in the surface-hardened hollow cylinder under creep | Abstract |
(Rus) |
| Radchenko V.P., Morozov A.P., Saushkin M.N. | |||
| No 3 (2017) | Modeling of elastic-plastic deformation of work material along multielement piecewise zig-zag linear trajectories | Abstract |
(Rus) |
| Zubchaninov V.G., Alekseev A.A., Gultiaev V.I. | |||
| No 4 (2017) | Stability of heated orthotropic geometrically irregular plate in a supersonic gas flow | Abstract |
(Rus) |
| Myltcina O.A., Belostochny G.N. | |||
| No 1 (2017) | Numerical investigation of a physically nonlinear problem of the longitudinal bending of the sandwich plate with a transversal-soft core | Abstract |
(Rus) |
| Badriev I.B., Makarov M.V., Paimushin V.N. | |||
| No 3 (2017) | Calculation and design of hybrid wooden beams | Abstract |
(Rus) |
| Nemirovsky Y.V., Boltaev A.I. | |||
| No 1 (2017) | The possibilities and limitations of the homogenized description of inelastic behavior of brittle porous materials under constrained conditions | Abstract |
(Rus) |
| Astafurov S.V., Shilko E.V., Psakhie S.G. | |||
| No 2 (2017) | NONLINEAR EQUILIBRIUM EQUATIONS OF THE CONICAL SHELL STIFFENED BY A DISCRETE SET OF FRAMES | Abstract |
(Rus) |
| Dudchenko A.A., Sergeev V.N. | |||
| No 3 (2017) | Variational method for non-classical problems of mechanics with constraints based on finite elements approximations and local variations | Abstract |
(Rus) |
| Banichuk N.V., Makeev E.V. | |||
| No 2 (2017) | Mathematical model and experimental studies of behavior of viscoelastic filled polymers under two-frequency loadings | Abstract |
(Rus) |
| Yankin A.S., Bulbovich R.V., Slovikov S.V. | |||
| No 4 (2016) | Theoretical-experimental method for determination of aerodynamic damping component of test samples with diamond-shaped cross-section | Abstract |
(Rus) |
| Paimushin V.N., Firsov V.A., Gyunal I., Shishkin V.M. | |||
| No 4 (2016) | Algorithms for numerical simulation of structures deformation and fracture within relations of damaged medium mechanics | Abstract |
(Rus) |
| Gorokhov V.A., Kazakov D.A., Kapustin S.A., Churilov Y.A. | |||
| No 3 (2016) | On delamination of a stripe along the boundary between two elastic layers Part 3. Exact analytical solution for a particular case | Abstract |
(Rus) |
| Ustinov K.B. | |||
| No 2 (2016) | NON-AXISYMMETRIC EDGE BUCKLING OF CIRCULAR PLATES WHEN HEATED | Abstract |
(Rus) |
| Goldstein R.V., Popov A.L., Kozintsev V.M., Chelyubeev D.A. | |||
| No 3 (2016) | Evaluation of service life of heat-resistant alloys under cyclic thermomechanical loading | Abstract |
(Rus) |
| Volkov I.A., Igumnov L.A. | |||
| No 4 (2016) | Numerical analysis of dynamic strength of composite cylindrical shells under multiple-pulse exposures | Abstract |
(Rus) |
| Abrosimov N.A., Elesin A.V. | |||
| No 2 (2016) | Transformation and interaction of microcracks in metal under high-energy pulsed electromagnetic field | Abstract |
(Rus) |
| Kukudzhanov K.V., Levitin A.L. | |||
| No 3 (2016) | Applicability of Reversed Experiment Technique to Determine Dynamic Characteristics of Saturated Soils | Abstract |
(Rus) |
| Kotov V.L., Balandin V.V., Balandin V.V. | |||
| No 4 (2016) | Methodology of numerical modelling of mechanical properties of the porous heat-shielding material based on ceramic fibers | Abstract |
(Rus) |
| Lurie S.A., Rabinsckiy L.N., Solyaev Y.O., Bouznik V.M., Lizunova D.V. | |||
| No 3 (2016) | Load-bearing capacity of ice weakened plates of curvilinear shape with variable thickness | Abstract |
(Rus) |
| Romanova T.P. | |||
| No 4 (2016) | Packaging and deployment of large shell structures by internal pressure loading | Abstract |
(Rus) |
| Pestrenin V.M., Pestrenina I.V., Rusakov S.V., Kondyurin A.V., Korepanova A.V. | |||
| No 3 (2016) | Surface SH-Waves in Pre-Stressed Piezoelectrics with Functionally Graded | Abstract |
(Rus) |
| Belyankova T.I., Kalinchuk V.V. | |||
| No 1 (2016) | Variant of thermoviscoplasticity theory | Abstract |
(Rus) |
| Bondar V.S., Danshin V.V., Kondratenko A.A. | |||
| No 2 (2016) | Manufacturing defects in composite flanges: modelling and analysis of influence on static strength | Abstract |
(Rus) |
| Anoshkin A.N., Zuiko V.Y., Osokin V.M., Tretyakov A.A., Pisarev P.V. | |||
| No 2 (2016) | Theoretical-experimental study of mechanical behavior in 3D composites under quasi-steady damage | Abstract |
(Rus) |
| Tsepennikov M.V., Strom A.A., Povyshev I.A., Smetannikov O.Y. | |||
| No 4 (2016) | Dispersive characteristics of flat longitudinal elastic waves extending in porous liquid-saturated medium with cavities | Abstract |
(Rus) |
| Aizikovich S.M., Erofeev V.I., Leonteva A.V. | |||
| No 1 (2016) | Fractal analysis of deformation curves of fiber-reinforced fine-grained concretes under compression | Abstract |
(Rus) |
| Selyaev V.P., Nizina T.A., Balykov A.S., Nizin D.R., Balbalin A.V. | |||
| No 3 (2016) | Non-stationary axisymmetric waves in electromagnetoelastic space with a spherical cavity | Abstract |
(Rus) |
| Vestyak V.A., Kuznetsova E.L., Tarlakovski D.V. | |||
| No 3 (2016) | Non-stationary problems for elastic half-plane with moving point of changing boundary conditions | Abstract |
(Rus) |
| Tarlakovskii D.V., Fedotenkov G.V. | |||
| No 4 (2016) | Experimental and numerical research of the dynamic response of composite outlet guide vane for aircraft jet engine | Abstract |
(Rus) |
| Grinev M.A., Anoshkin A.N., Pisarev P.V., Shipunov G.S., Nikhamkin M.S., Balakirev A.A., Konev I.P., Golovkin A.Y. | |||
| No 1 (2016) | Chaotic dynamics of flexible rectangular panels in white noise field | Abstract |
(Rus) |
| Krylova E.Y., Yakovleva T.V., Bazhenov V.G. | |||
| No 1 (2016) | Features of solving technological problems in mechanics of bodies with non-uniform metal structure transformed in thermo-force loading | Abstract |
(Rus) |
| Bagmutov V.P., Zakharov I.N., Denisevich D.S. | |||
| No 3 (2016) | Graph model of three-dimensional elastic solids in Cartesian Coordinates | Abstract |
(Rus) |
| Tyrymov A.A. | |||
| No 4 (2016) | Stress-strain state of an elastic soft functionally-graded coating subjected to indentation by a spherical punch | Abstract |
(Rus) |
| Volkov S.S., Vasiliev A.S., Aizikovich S.M., Seleznev N.M., Leontieva A.V. | |||
| No 4 (2016) | The influence of fluid filtration on the strength of porous fluid-saturated brittle materials | Abstract |
(Rus) |
| Dimaki A.V., Shilko E.V., Astafurov S.V., Psakhie S.G. | |||
| No 3 (2016) | Yarn-level modelling of woven and unidirectional thermoplastic composite materials under ballistic impact | Abstract |
(Rus) |
| Kudryavtsev O.A., Sapozhnikov S.B. | |||
| No 3 (2016) | Normal and shear stresses estimation in deformed metals based on infrared thermography data | Abstract |
(Rus) |
| Terekhina A.I., Kostina A.A., Plekhov O.A. | |||
| No 2 (2016) | Rationale of the use of the constructive anisotropy method in the calculation of shallow shells of double curvature, weakened holes | Abstract |
(Rus) |
| Kamenev I.V., Semenov A.A. | |||
| No 4 (2016) | A new algorithm for generating a random packing of ellipsoidal inclusions to construct composite microstructure | Abstract |
(Rus) |
| Shubin S.N., Freidin A.B. | |||
| No 3 (2016) | Dynamics of partially saturated poroelastic solids by boundary-element method | Abstract |
(Rus) |
| Igumnov L.A., Petrov A.N. | |||
| No 1 (2016) | DETERMINATION OF MECHANICAL CHARACTERISTICS OF TRANSVERSELY ISOTROPIC FIBER COIL ACCORDING TO ISOTROPIC PROPERTIES OF ITS COMPONENTS | Abstract |
(Rus) |
| Gasparyan A.G., Esipenko I.A. | |||
| No 3 (2016) | Static and dynamic analysis for 3D problems of linear magneto-electro-elasticity using BEM | Abstract |
(Rus) |
| Markov I.P. | |||
| No 4 (2016) | Finite element investigation of the effectiveness of the tubular piezoelectric vibratory gyroscope depending on the type of polarization and boundary conditions | Abstract |
(Rus) |
| Nasedkin A.V., Shprayzer E.I. | |||
| No 3 (2016) | Structural geometrical transitions under dynamic loading of materials | Abstract |
(Rus) |
| Savenkov G.G., Kuznetsov A.V., Bragov A.M., Konstantinov A.Y., Lomunov A.K. | |||
| No 1 (2016) | Finite-element modelling of thermal and deformational processes in manufacturing high-strength wire | Abstract |
(Rus) |
| Shavrin O.I., Skvortsov A.N. | |||
| No 4 (2016) | CORRELATION FUNCTIONS OF STRESS AND STRAIN FIELDS IN MICRO-HETEROGENEOUS MEDIA | Abstract |
(Rus) |
| Tashkinov M.A., Mikhailova N.V. | |||
| No 2 (2016) | INTEGRATED APPROACH TO STUDYING CHARACTERISTICS OF DYNAMIC DEFORMATION ON FLEXIBLE PAVEMENT SURFACE USING NONDESTRUCTIVE TESTING | Abstract |
(Rus) |
| Uglova E.V., Tiraturyan A.N., Lyapin A.A. | |||
| No 2 (2016) | Special features of numerical simulation for elastic-plastic buckling of hemispherical shells under loading with the rigid indenter | Abstract |
(Rus) |
| Bazhenov V.G., Demareva A.V., Zhestkov M.N., Kibets A.I. | |||
| No 2 (2016) | O geometricheski nelineynykh opredelyayushchikh sootnosheniyakh uprugogo materiala | Abstract | |
| Trusov P.V., Kondrat'ev N.S., Shveykin A.I. | |||
| No 4 (2016) | A modifiedBouc-Wen model to describe the hysteresis of non-stationary processes | Abstract |
(Rus) |
| Danilin A.N., Kuznetsova E.L., Kurdumov N.N., Rabinsky L.N., Tarasov S.S. | |||
| No 4 (2016) | DYNAMICS OF MULTILINK ROD SYSTEM WITH CONSTRAINTS: A PLANE PROBLEM IN FINITE ELEMENT FORMULATION | Abstract |
(Rus) |
| Danilin A.N. | |||
| No 4 (2016) | Analysis on cyclic deformation and low-high-cycle fatigue in uniaxial stress state | Abstract |
(Rus) |
| Bondar V.S., Danshin V.V., Alkhimov D.A. | |||
| No 3 (2016) | Finite element analysis of biaxial cyclic tensile loading of elasto-plastic plate with central elliptical hole | Abstract |
(Rus) |
| Turkova V.A., Stepanova L.V. | |||
| No 4 (2016) | SPECTRAL DECOMPOSITIONS IN DYNAMICAL VISCOELASTIC PROBLEMS | Abstract |
(Rus) |
| Lycheva T.N., Lychev S.A. | |||
| No 1 (2016) | A mathematical modeling and experimental study of forming and relaxation of the residual stresses in plane samples made of EP742 alloy after the ultrasonic hardening under the high-temperature creep conditions | Abstract |
(Rus) |
| Radchenko V.P., Saushkin M.N., Bochkova T.I. | |||
| No 2 (2016) | The method for analyzing mechanics of thin elastic rod systems using the differential approach | Abstract |
(Rus) |
| Krasnorutskiy D.A. | |||
| No 4 (2016) | Dynamics of unbalanced flexible rotor with anisotropic supports during contact with the stator | Abstract |
(Rus) |
| Kurakin A.D., Nikhamkin M.S., Semenov S.V. | |||
| No 3 (2016) | Computational and experimental research of the contact debonding process when rigid reinforcement is pressed into concrete | Abstract |
(Rus) |
| Kashevarova G.G., Martirosyan A.S., Travush V.I. | |||
| No 4 (2016) | Numerical analysis of poroviscoelastic prismatic solids and halfspaces dynamics via boundary element method | Abstract |
(Rus) |
| Ipatov A.A., Belov A.A., Litvinchuk S.Y. | |||
| No 2 (2016) | Separation process modeling of composite with adhesive layer | Abstract |
(Rus) |
| Glagolev V.V., Markin A.A., Fursaev A.A. | |||
| No 3 (2016) | Experimental study of deformation properties of a package of woven metal mesh under dynamic and quasi-static stressing | Abstract |
(Rus) |
| Bragov A.M., Zhegalov D.V., Konstantinov A.Y., Kochetkov A.V., Modin I.A., Savikhin A.O. | |||
| No 1 (2016) | Application of planar beamforming method to identification of spinning acoustic modes | Abstract |
(Rus) |
| Bersenev Y.V., Viskova T.A., Belyaev I.V., Palchikovskiy V.V., Kustov O.Y., Ershov V.V., Burdakov R.V. | |||
| No 4 (2016) | Anisotropy of material fatigue properties and its effect on durability of structural elements | Abstract |
(Rus) |
| Burago N.G., Nikitin I.S., Yushkovsky P.A., Yakushev V.L. | |||
| No 2 (2016) | On delamination of a strip along the boundary between two elastic layers. Part 2, Сase of shear crack | Abstract |
(Rus) |
| Ustinov K.B. | |||
| No 3 (2016) | Stress-strain state near the wedge top with rigidly fastened sides | Abstract |
(Rus) |
| Pestrenin V.M., Pestrenina I.V., Landik L.V. | |||
| No 4 (2016) | Mathematical modeling of piezo-electro-luminescent effect and diagnostics of pressure distribution along fiber optic sensor | Abstract |
(Rus) |
| Pan’kov A.A. | |||
| No 3 (2016) | A numerical study of stress-strain state evolution in structurally inhomogeneous materials subjected to uniaxial loading | Abstract |
(Rus) |
| Smirnov S.V., Konovalov A.V., Myasnikova M.V., Khalevitsky Y.V., Smirnov A.S. | |||
| No 3 (2016) | Influence of first and second phase transitions on the form of shock adiabate in condensed bodies | Abstract |
(Rus) |
| Kozlov A.N., Rybakov A.P. | |||
| No 1 (2016) | Study of heat source evolution during elastic-plastic deformation of titanium alloy Ti-0.8Al-0.8Mn based on contact and non-contact measurements | Abstract |
(Rus) |
| Iziumova A.Y., Vshivkov A.N., Prokhorov A.E., Plekhov O.A., Venkatraman B. | |||
| No 4 (2016) | Nucleation recrystallization mechanisms in metals at thermomechanical processing | Abstract |
(Rus) |
| Kondratev N.S., Trusov P.V. | |||
| No 1 (2016) | On strain hardening of cast iron with proportional and complex loading | Abstract |
(Rus) |
| Rychkov B.A., Goncharova I.V., Volkov A.V. | |||
| No 4 (2015) | On account of scale effects in the simulation of mechanical and tribological properties of two-phase microand nanomodified polymer coatings | Abstract |
(Rus) |
| Buznik V.M., Lurie S.A., Volkov-Bogorodskiy D.B., Knyazeva A.G., Solyaev Y.O., Popova E.I. | |||
| No 4 (2015) | Stress-strain analysis and strength prediction of composite outlet guide vane for aircraft jet engine | Abstract |
(Rus) |
| Grinev M.A., Anoshkin A.N., Pisarev P.V., Zuiko V.Y., Shipunov G.S. | |||
| No 3 (2015) | CAD/CAE modelling of mechanical behavior of composite outlet guide vane for aircraft jet engine | Abstract |
(Rus) |
| Grinev M.A., Anoshkin A.N., Pisarev P.V., Zuiko V.Y., Shipunov G.S. | |||
| No 3 (2015) | Decomposition of systems of equations for continuum mechanics 2. General results and applications | Abstract |
(Rus) |
| Lychev S.A., Polyanin A.D., Levitin A.L. | |||
| No 4 (2015) | Simulation of thermal drift of fiber-optic gyroscope taking into account piezo-optical effects | Abstract |
(Rus) |
| Galyagin K.S., Oshivalov M.A., Savin M.A. | |||
| No 3 (2015) | A set of tests for studying the effect of the stress state on ultimate metal plasticity at high temperature | Abstract |
(Rus) |
| Smirnov S.V., Vichuzhanin D.I., Nesterenko A.V. | |||
| No 4 (2015) | NONAXISYMMETRIC DYNAMIC PROBLEM OF THE DIRECT PIEZOEFFECT FOR AXIALLY POLARIZED SOLID CYLINDER | Abstract |
(Rus) |
| Shlyakhin D.A. | |||
| 501 - 600 of 737 Items | << < 1 2 3 4 5 6 7 8 > >> | ||