| Issue |
Title |
| Vol 15, No 3 (2013) |
DINAMIKA REZhUShchEGO ELEKTRODA PRI PROVOLOChNO-VYREZNOY ELEKTROEROZIONNOY OBRABOTKE |
|
|
Ablyaz T.R., Maksimov P.V. |
| Vol 18, No 2 (2016) |
INFLUENCE OF VOLTAGE AND WIRE SPEED ON FORMING THE MACHINED SURFACE ROUGHNESS DURING WIRE ELECTRICAL DISCHARGE MACHINING |
|
|
Abliaz T.R., Shumkov A.A. |
| Vol 16, No 4 (2014) |
INVESTIGATION OF PROCESS OF DYNAMIC RECRYSTALLIZATION DURING HOT DEFORMATION BASED ON PHYSICAL MODELING ON GLEEBLE 3500 SYSTEM |
|
|
Barishnikov M.P., Ishimov A.S., Zherebtsov M.S., Efimova Y.Y., Nikitenko O.A. |
| Vol 20, No 1 (2018) |
ASSESSMENT OF A POSSIBILITY POLISHING OF STAINLESS STEELS JET ELECTROLYTIC AND PLASMA PROCESSING |
|
|
Novoselov M.V., Shilling N.G., Rudavin A.A., Radkevich M.M., Popov A.I. |
| Vol 14, No 3 (2012) |
CALCULATION OF WIRE ELECTROD VIBRATION DURING ELECTRICAL DISCHARGE MACHINING |
|
|
Ablyaz T.R., Ivanov V.A. |
| Vol 22, No 1 (2020) |
Ensuring the effectiveness of abrasive finishing of screw complex-profile shafts |
|
|
Spirin V.A., Makarov V.F., Khalturin O.A. |
| Vol 20, No 2 (2018) |
Improving the quality of the surfaces of products obtained by electrical discharge machining using electrolytic-plasma polishing technology |
|
|
Ablyaz T.R., Muratov K.R., Kochergin E.U., Shakirzanov T.V. |
| Vol 18, No 3 (2016) |
PROCESS ELECTRIC-SPARK CARBURIZING IN AN ULTRASONIC FIELD |
|
|
Shevchenko O.I., Trekin G.E. |
| Vol 22, No 1 (2020) |
The quality of edges when finishing parts on robotic complex |
|
|
Podashev D.B. |
| Vol 15, No 3 (2013) |
Mekhanicheskaya obrabotka zakalennykh lazerom kol'tsevykh vystupov iz poroshkovoy medistoy stali |
|
|
Morozov E.A., Rusin E.S. |
| Vol 19, No 1 (2017) |
APPLICATION OF DIGITAL IMAGE ANALYSIS IN THE RESEARCH AND EVALUATION OF STATISTICAL PARAMETERS OF SOLID PARTICLES WELDING FUMES |
|
|
Ignatova A.M., Vereschagin V.I. |
| Vol 23, No 3 (2021) |
Improving the reliability of oilfield and drilling equipment through integrated design and technological support for the manufacture and assembly of threaded connections |
|
|
Pesin M.V., Makarov V.F., Khalturin O.A., Pavlovich A.A., Melnikov A.S., Makarenkov E.S. |
| Vol 18, No 1 (2016) |
A systematic approach to the analysis of management methods accuracy precision machining considering the dominant role of morphogenetic movements |
|
|
Samoilova E.M., Kolokolova S.S., Vinogradov M.V. |
| Vol 20, No 2 (2018) |
Research of the multifactorial dependences of the dimensions of microholes on the basic parameters of the electrical discharge machining |
|
|
Loyko A.M., Boyko A.F. |
| Vol 18, No 3 (2016) |
METALLOGRAPHIC ANALYSIS OF MORPHOLOGY EROSION PRODUCTS |
|
|
Ablyaz T.R., Oglezneva S.A., Ogleznev N.D., Grisharin A.O. |
| Vol 22, No 1 (2020) |
Damping capacity, coercive force and structure of Fe-Cr-Al alloys depending on the temperature of thermomagnetic treatment |
|
|
Melchakov M.A., Scvortsov A.I. |
| Vol 19, No 2 (2017) |
Analysis of the evolution of the error in the shape of the electrode-tool with the use of rapid prototyping technologies |
|
|
Shumkov A.A., Ablyaz T.R., Kochneva A.A., Mal'tseva I.N., Maslennikova N.A., Matalasova V.I., Popova E.S., Shardina T.A. |
| Vol 24, No 1 (2022) |
THE METHOD OF INFRARED THERMOGRAPHY FOR DETECTING A HIDDEN DEFECT IN THE AVIATION STRUCTURE OF POLYMER COMPOSITES |
|
|
Kornilov G.A. |
| Vol 18, No 1 (2016) |
DEFORMATION AND THERMAL PHENOMENA IN THE CUTTING METAL THERMOFRICTIONAL ZONE |
|
|
Kravchenko O.S., Pokintelitsa N.I. |
| Vol 21, No 1 (2019) |
INFLUENCE OF MAGNETIC PROCESSING ON THE DURABILITY OF THE WORKING PARTS OF SPRING-COILING MACHINES |
|
|
Zelinskiy V.V., Gots A.N., Gusev V.G., Borisova E.A. |
| Vol 18, No 3 (2016) |
A comparison of solid-hardened and nitride-hardened nitrided chromium-nickel-based alloy based on a mathematical model |
|
|
Ding K.J., Semenov M.Y. |
| Vol 22, No 1 (2020) |
Metallographic investigations of welded Joints of aluminium alloy of Al-Mg-Li System, subjected to Thermal Vacuum treatment |
|
|
Fedoseeva E.M., Olshanskaya T.V., Prokhorov P.V. |
| Vol 16, No 1 (2014) |
STUDY OF TRANSFORMATIONS AND STRUCTURES OF SILICON STEELS AFTER ISOTHERMAL EXPOSURE AT DIFFERENT TEMPERATURES |
|
|
Leontiev P.A., Simonov Y.N., Ivanova A.S. |
| Vol 19, No 2 (2017) |
Spark gap empirical simulation during elecTrical discharge machining of steel 38X2H2MA |
|
|
Ablyaz T.R., Schlykov E.S., Borisov D.A., Shumkov A.A., Letyagin I.Y. |
| Vol 24, No 1 (2022) |
INVESTIGATION OF THE STRUCTURE AND PROPERTIES OF NON-METALLIC INCLUSIONS IN STEELS |
|
|
Lomaeva T.V., Kugultinov S.D., Popov I.V., Svirschev V.I. |
| Vol 21, No 1 (2019) |
Investigation of the zoning of a waterjet cut's surface on structural steel of ordinary quality by the method of image analysis |
|
|
Ignatova A.M., Balabanov S.K., Ignatov M.N. |
| Vol 18, No 3 (2016) |
Structure and properties of Ni47Mn42In11 alloy AFTER THERMOCYCLIC TREATMENT |
|
|
Kaletina Y.V., Efimova E.D., Gerasimov E.G., Kaletin A.Y., Fokina E.A. |
| Vol 22, No 2 (2020) |
The influence of the microstructure of the electrode-tool on the efficiency of EDM materialsprocess |
|
|
Shiryaev V.V., Ablyaz T.R., Schlykov E.S., Pustovalov D.O., Smolentsev E.V. |
| Vol 16, No 2 (2014) |
Effect of electrical current on the aluminum alloy D16 with a surface micro-arc oxidation coating |
|
|
Ponomarev I.S., Krivonosova E.A. |
| Vol 19, No 3 (2017) |
Investigation of the structure and relative erosion resistance of electrodes-tools made from powder materials based on copper and carbide, carbonitride, tungsten carbosilicide of titanium |
|
|
Ogleznev N.D., Oglezneva S.A., Grevnov L.M., Ablyaz T.R. |
| Vol 18, No 2 (2016) |
RESEARCH LAPPING PROCESS OF THE MINERAL CERAMICS |
|
|
Muratov K.R., Gashev E.A., Lagunov D.M., Matygullina E.V. |
| Vol 21, No 1 (2019) |
ON THE EVALUATION OF HYDRO BLASTING INFLUENCE ON THE ENDURANCE LIMIT OF PARTS BY THE INITIAL DEFORMATIONS OF REFERENCE SPECIMEN |
|
|
Pavlov V.F., Sazanov V.P., Vakulyuk V.S. |
| Vol 18, No 3 (2016) |
Hydrogen induced polymorphism and phase-structural bases of the hydrogen treatment of materials |
|
|
Goltsov V.A., Goltsova M.V. |
| Vol 22, No 2 (2020) |
The effect of hydrophilic media on the characteristics of dispersible multi-walled carbon nanotubes |
|
|
Porozova S.E., Pozdeeva T.Y., Vokhmyanin D.S., Lapteva Y.A. |
| Vol 16, No 3 (2014) |
STUDY erosion resistance electrode tool from composite materials for electrical discharge machining |
|
|
Ogleznev N.D. |
| Vol 19, No 3 (2017) |
Increase of efficiency Electrical discharge machining of details of hydraulic cylinders and products of special purpose by application of electrodes with the raised Electrical discharge machining properties |
|
|
Grisharin A.O., Ablyaz T.R., Ogleznev N.D. |
| Vol 18, No 2 (2016) |
Maintenance problem of the sealing surfaces roughness of the pipeline armature closing knot |
|
|
Gusev V.G., Zuev M.S. |
| Vol 21, No 2 (2019) |
DIMENSIONAL PARAMETERS OF THE TECHNOLOGICAL PROCESS OF OBTAINING CAST MOLDED CRYSTALLINE MATERIALS OF THE FLUORFLOGOPITA TYPE |
|
|
Ignatova A.M., Yudin M.V., Ignatov M.N. |
| Vol 18, No 4 (2016) |
MULTICOMPONENT CONCENTRATION-INHOMOGENEOUS ALLOYS OF Fe-Cr-Co-Si-B WITH HIGH DENSITY |
|
|
Kozvonin V.A., Shatsov A.A., Ryaposov I.V. |
| Vol 22, No 2 (2020) |
Simulation of the microstructure of aluminum bronze CuAlFe 9-4 providing increased resistance to wear |
|
|
Svyatkin A.V., Popova L.I., Shenderei P.E. |
| Vol 19, No 4 (2017) |
THE INFLUENCE OF PLASMA TREATMENT REGIMES ON THE DISTRIBUTION OF NONMETALLIC INCLUSIONS IN STEEL |
|
|
Myshkina A.V., Akulova S.N., Krivonosova E.A., Shchitsyn I.D., Sinani I.L. |
| Vol 18, No 2 (2016) |
The methods of influence on the structure and properties of aluminum alloys used in the aerospace industry |
|
|
Dolgopolov V.G., Dubrovskii V.A., Simonov M.I., Simonov I.N., Iurchenko A.N., Shibanova K.A. |
| Vol 21, No 3 (2019) |
THERMAL TREATMENT OF GRINDING BALLS AT NEW BALL-ROLLING SHOP |
|
|
Shevchenko O.I., Trekin G.E., Rubtsov V.Y., Kurochkin V.V. |
| Vol 18, No 4 (2016) |
Features of formation of the flat grinding technological process by an end face of a circle with an elastic suspension grinding head |
|
|
Aksenov V.A., Ilinykh A.S., Galay M.S., Matafonov A.V. |
| Vol 22, No 3 (2020) |
Review of electroplating-plasma modification methods for the production of anodized coatings on aluminum alloys: microstructure, properties and application |
|
|
Al-Budeiri M.S. |
| Vol 16, No 4 (2014) |
INVESTIGATION OF STRUCTURE AND PROPERTIES OF CARBURIZED LAYERS IN LOW-CARBON CARBURIZING STEELS |
|
|
Ivanov A.S., Bogdanova M.V. |
| Vol 18, No 2 (2016) |
THE PROGRAM MODULE DESIGNATED PROCESSING CONDITIONS FINISHING EMPLOYING AUTOMATIC BRUSHING STATIONARY INSTALLATION |
|
|
Chapyshev A.P., Starodubtseva D.A. |
| Vol 21, No 3 (2019) |
PREDICTION OF THE QUALITY OF THE PROCESSED SURFACE OF PRODUCTS MADE OF TITANIUM ALLOYS AFTER ELECTRO-EROSIVE TREATMENT |
|
|
Shlykov E.S., Abliaz T.R., Osinnikov I.V., Khabarova A.V., Omelin A.A. |
| Vol 18, No 4 (2016) |
Features of control precision machining machine parts |
|
|
Ostapchuk A.K., Kuznetsova E.M., Michalischev A.G., Shashkov A.I. |
| Vol 22, No 3 (2020) |
About formation of defects in quartz glass granules based on tetraethoxysilane |
|
|
Vozyakov A.O., Porozova S.E. |
| Vol 17, No 2 (2015) |
VARIATIONAL TECHNIQUES OF SURFACE PREPARATION FOR THE SUBSEQUENT FORMING BIOCOMPATIBLE TITANIUM-CARBON MATERIALS |
|
|
Nikulin S.M., Smetkin A.A., Astashina N.B. |
| Vol 20, No 1 (2018) |
Simulation of the temperature effect of a single pulse during electrical discharge machining |
|
|
Ablyaz T.R., Muratov K.R., Krasnovsky E.E., Borisov D.A. |
| Vol 18, No 3 (2016) |
Influence of orientation of the model in the process of building on the accuracy of the prototype form |
|
|
Shumkov A.A., Abliaz T.R. |
| Vol 21, No 3 (2019) |
POLYMORPHISM OF METALS IS AN IMPORTANT CONSTITUENT OF SCIENTIFIC AND TECHNICAL BASIS OF MODERN HUMAN CIVILIZATION "AFTER CHERNOV" |
|
|
Goltsov V.A., Goltsova L.F. |
| Vol 18, No 4 (2016) |
INFLUENCE OF SPEED OF COOLING ON FORMATION OF STRUCTURE OF A RAIL STEEL MICROALLOYED BY VANADIUM AND NIOBIUM |
|
|
Polevoy E.V., Dobuzhskaya A.B., Temlyantsev M.V. |
| Vol 22, No 3 (2020) |
Investigation of the effect of granule crystallization rates on the strength characteristics of pressed semi-finished aluminum alloys of the Al-Cu-Mg system |
|
|
Zharov M.V. |
| Vol 17, No 4 (2015) |
AUTOMATED INTELLIGENT MONITORING OF MANUFACTURING CAMSHAFTS |
|
|
Kasimov S.A., Samoilova E.M. |
| Vol 20, No 1 (2018) |
INFLUENCE OF THE MODES OF MECHANICAL PROCESSING OF STEEL 38KhN3MFA ON THE VALUE OF RESIDUAL MACROSTRESSES |
|
|
Aleksandrova O.Y., Shiryaev A.A., Snegireva A.V., Trofimov V.N., Karmanov V.V. |
| Vol 18, No 3 (2016) |
MICROSTRUCTURAL FEATURES, MECHANICAL PROPERTIES AND HEAT TREATMENT OF BAINITIC STEEL |
|
|
Yurchenko A.N., Simonov Y.N. |
| Vol 21, No 4 (2019) |
FORMATION ADDITIVE METAL PIECE BY MEANS OF SUBMERGED ARC WELDING |
|
|
Trekin G.E., Shevchenko O.I. |
| Vol 14, No 4 (2012) |
STRUCTURE OF THE SURFACE LAYER OF WORKPIECE IN THE PROCESSING OF WIRE-EDM |
|
|
Ablyaz T.R. |
| Vol 19, No 1 (2017) |
Modern approaches to the implementation of final qualifying work master |
|
|
Pakhomova S.A., Shevchenko S.Y., Manayev O.I. |
| Vol 22, No 4 (2020) |
Features of electrical discharge machining with a crust electrode-tool obtained by the technology of galvanic deposition |
|
|
Abliaz T.R., Osinnikov I.V., Shlykov E.S., Konogorova L.V., Plotnikov E.V. |
| Vol 18, No 1 (2016) |
Investigation of the structure and properties of materials Cu-Ti3SiC2 of tool-electrode for electrical discharge machining |
|
|
Oglezneva S.A., Gilev V.G., Ogleznev N.D. |
| Vol 20, No 1 (2018) |
EXPERIMENTAL DETERMINATION OF SURFACE TENSIONS AND KINEMATIC VISCOSITY OF MELTS OF STEEL TUBES IN CONDITIONS OF JSC "VYKSUNSK METALLURGICAL PLANT" |
|
|
Somov S.A., Tsepelev V.S., Konashkov V.V., Vyukhin V.V., Taushkanova A.I. |
| Vol 18, No 3 (2016) |
Special features of the fracture surface of structural steel 09G2S after cold radial forging |
|
|
Shaimanov G.S., Simonov M.Y., Simonov Y.N., Pertsev A.S. |
| Vol 15, No 3 (2013) |
Vliyanie rezhimov elektroerozionnoy proshivki na tochnost' razmerov i sherokhovatost' otverstiy |
|
|
Ogleznev N.D., Ablyaz T.R. |
| Vol 19, No 1 (2017) |
Transformation of non-metallic inclusions in steels by the action of the plasma heat source |
|
|
Krivonosova E.A., Belinin D.S., Krivonosova E.K. |
| Vol 23, No 1 (2021) |
Pipes drilling for various purposes with a given direction |
|
|
Myshkin M.I., Farkhullina I.S. |
| Vol 18, No 1 (2016) |
THE INFLUENCE OF THE CONTINUOUS COOLING AND OF THE AUSTEMPERING ON A MICROSTRUCTURE AND OF MECHANICAL PROPERTIES IN STEELS 17Cr2Mn2Si2MoV AND 29Cr2Mn2Si2MoV |
|
|
Iurchenko A.N., Simonov I.N., Mikriukov M.I. |
| 1 - 70 of 70 Items |
|
