ARTICLES
Issue | Title | Abstract | File |
No 1 (2019) | Mathematical modeling of the stress-strain state in surface hardened thin-walled tubes with regard to the residual shear stresses | Abstract |
(Rus) |
Radchenko V.P., Pavlov V.P., Saushkin M.N. | |||
No 3 (2019) | The Analysis of residual stresses in layered composites with [0°/90°] layup | Abstract |
(Rus) |
Bondarchuk D.A., Fedulov B.N., Fedorenko A.N., Lomakin E.V. | |||
No 4 (2019) | Non-stationary coupled axisymmetric thermoelasticity problem for a rigidly fixed round plate | Abstract |
(Rus) |
Shlyakhin D.A., Dauletmuratova Z.M. | |||
No 3 (2019) | A Review of some non-traditional applications of the engineering theory of high-speed penetration | Abstract |
(Rus) |
Dubinsky A.V. | |||
No 1 (2019) | On Predicting Material and Structural Resources under Cyclic Loading | Abstract |
(Rus) |
Bondar V.S., Abashev D.R., Petrov V.K. | |||
No 2 (2019) | Analysis of Dynamic Characteristics of a Contact Interaction of Solids Using Computational Software | Abstract |
(Rus) |
Maksimenko A.A., Koteneva N.V., Perfilieva N.V., Borisova A.D. | |||
No 4 (2019) | Numerical study of the influence of gaps between tiles and backing type on overall high-velocity impact performance of a ceramic-faced protective structure | Abstract |
(Rus) |
Kudryavtsev O.A., Sapozhnikov S.B., Zhikharev M.V. | |||
No 1 (2019) | The Influence of Stress Concentrators on the Magnesium Alloy Mechanical Behavior under Deformation at High Strain Rates in the Temperature Range from 295 to 673 K | Abstract |
(Rus) |
Skripnyak V.A., Skripnyak V.V., Kozulin A.A., Iohim K.V. | |||
No 3 (2019) | The Assessment of Fatigue Durability and Critical Plane Determination for Multiaxial Cyclic Loading at an Arbitrary Shift of Phases | Abstract |
(Rus) |
Burago N.G., Nikitin I.S., Nikitin A.D., Stratula B.A. | |||
No 3 (2019) | The Structure of Interfacial Regions in Polymer Nanocomposites | Abstract |
(Rus) |
Dyshin O.A., Habibov I.A., Shamilov V.M., Rustamova K.B. | |||
No 1 (2019) | Experimental study of postcritical deformation and failure of steels at high temperature | Abstract |
(Rus) |
Wildemann V.E., Tretyakov M.P. | |||
No 2 (2019) | Dynamics of a Viscoelastic Plate Carrying Concentrated Mass with Account of Physical Nonlinearity of Material. Part 1. Mathematical Model, Solution Method and Computational Algorithm | Abstract |
(Rus) |
Mirsaidov M.M., Abdikarimov R.A., Khodzhaev D.A. | |||
No 4 (2019) | Analysis of models for porosity evolution in reservoir during steam injection | Abstract |
(Rus) |
Kostina A.A., Zhelnin M.S., Plekhov O.A. | |||
No 1 (2019) | Evaluation of the Damage Degree to Carbon-Fiber Composite Materials under Impact | Abstract |
(Rus) |
Staroverov O.A., Babushkin A.V., Gorbunov S.M. | |||
No 3 (2019) | Inverse coefficient problems in mechanics | Abstract |
(Rus) |
Vatulyan A.O., Plotnikov D.K. | |||
No 2 (2019) | Description of the Effect of AlMg6 Alloy Strength Decrease during Temperature Increase under Dynamic Loading | Abstract |
(Rus) |
Bilalov D.A., Sokovikov M.A., Bayandin Y.V., Chudinov V.V., Oborin V.A., Naimark O.B. | |||
No 3 (2019) | The Phenomenological Model of Hyper Viscoelasticity of Elastomers with a Constant Orientation of the Main Stress Axes in the Accompanying Frame of Reference | Abstract |
(Rus) |
Korneyev V.S., Korneyev S.A. | |||
No 1 (2019) | Application of the Acoustic Emission Technique to Studying the Damage Accumulation in a Functional Ceramic Coating | Abstract |
(Rus) |
Zubova E.M., Lobanov D.S., Strungar E.M., Wildemann V.E., Lyamin Y.B. | |||
No 2 (2019) | Deformation model of a five-layer panel with a hard filler | Abstract |
(Rus) |
Osadchy N.V., Malyshev V.A., Shepel V.T. | |||
No 4 (2019) | Numerical modeling of nonlinear dynamic and static compression of the metal mesh | Abstract |
(Rus) |
Kochetkov A.V., Modin I.A., Leontev N.V., Turigina I.A., Poverennov E.Y. | |||
No 1 (2019) | Comprehensive analysis of mechanical behavior and fracture processes of specimens of three-dimensional reinforced carbon fiber in tensile tests | Abstract |
(Rus) |
Tretyakova T.V., Dushko A.N., Strungar E.M., Zubova E.M., Lobanov D.S. | |||
No 3 (2019) | Construction of Multigrid Finite Elements to Calculate Shells, Plates and Beams Based on Generating Finite Elements | Abstract |
(Rus) |
Matveev A.D. | |||
No 2 (2019) | The Investigation of the Initial Stress-Strain State Influence on Mechanical Properties of Viscoelastic Bodies | Abstract |
(Rus) |
Bogachev I.V., Vatulyan A.O., Dudarev V.V., Nedin R.D. | |||
No 3 (2019) | The Stressed state of the double-layer rectangular plate under shift. The Simplified two-dimensional model | Abstract |
(Rus) |
Kurennov S.S., Barakhov K.P. | |||
No 1 (2019) | Autowave mechanics of metal plasticity | Abstract |
(Rus) |
Zuev L.B., Barannikova S.A. | |||
No 2 (2019) | Filtration in Fluid-Saturated Poro-Plastic MaterialS during Lateral Extrusion | Abstract |
(Rus) |
Sevastyanov G.M. | |||
No 4 (2019) | Determination of the critical velocity of the fluid flowing in a single-walled carbon nanotubes embedded in a polymer matrix | Abstract |
(Rus) |
Lolov D.S., Lilkova-Markova S.V. | |||
No 1 (2019) | The Research of the Mechanical Behavior of Elastically Transformable Composite Structures | Abstract |
(Rus) |
Khaliulin V.I., Batrakov V.V., Shabalin L.P., Kiauka M.Y., Bezzametnov O.N. | |||
No 3 (2019) | Stability of chemical reaction fronts in the vicinity of a blocking state | Abstract |
(Rus) |
Morozov A.V., Freidin A.B., Müller W.H. | |||
No 2 (2019) | Some Features of Monotonic and Cyclic Loadings. Experiment and Modeling | Abstract |
(Rus) |
Bondar V.S., Abashev D.R. | |||
No 4 (2019) | Dispersion and attenuation of a longitudinal wave propagating in a metamaterial defined as a mass-to-mass chain | Abstract |
(Rus) |
Erofeev V.I., Kolesov D.A., Krupenin V.L. | |||
No 1 (2019) | Investigation of the behavior of cylindrical bodies under conditions of joint tension and torsion under disproportionate loading | Abstract |
(Rus) |
Kryukov A.A. | |||
No 2 (2019) | Experimental Studies of Mechanical Properties of Implants for Plasty of Hernial Defects | Abstract |
(Rus) |
Slovikov S.V., Ilinykh A.V. | |||
No 4 (2019) | Elastoplastic deformation of a rotating hollow cylinder with a rigid casing | Abstract |
(Rus) |
Prokudin A.N., Firsov S.V. | |||
No 1 (2019) | New Paradigms in Metals Fatigue Description | Abstract |
(Rus) |
Shanyavskiy A.A., Soldatenkov A.P. | |||
No 3 (2019) | The Modeling of the Edge Fatigue Crack Growth under High Frequency Loading | Abstract |
(Rus) |
Nikitin A.D., Nikitin I.S., Stratula B.A. | |||
No 2 (2019) | Hydroelastic stability of coaxial cylindrical shells made of piezoelectric material | Abstract |
(Rus) |
Bochkarev S.A., Lekomtsev S.V. | |||
No 4 (2019) | Experimental and theoretical study of mechanical deformation of freezing saturated soil | Abstract |
(Rus) |
Zhelnin M.S., Prokhorov A.E., Kostina A.A., Plekhov O.A. | |||
No 2 (2018) | Numerical damping of oscillations of beams by using multiple point actuators | Abstract |
(Rus) |
Atamuratov A.Z., Mikhailov I.E., Taran N.A. | |||
No 4 (2018) | A Body Failure Model with a Notch Based on the Scalable Linear Parameter | Abstract |
(Rus) |
Berto F., Glagolev V.V., Markin A.A. | |||
No 2 (2018) | Modeling of dynamic behavior of reinforced cylindrical shells under elastic-plastic deformation of materials of composition components | Abstract |
(Rus) |
Yankovskii A.P. | |||
No 3 (2018) | Modelling the Stress-Strain State of Blades Affected by Plasma Arc for the Food Grinding Plant | Abstract |
(Rus) |
Veremeichik A.I., Sazonov M.I., Hvisevich V.M. | |||
No 4 (2018) | Shaped and branched analogs of triangle multi-leaf spring | Abstract |
(Rus) |
Polilov A.N., Tatus N.A., Tian X. | |||
No 1 (2018) | Applied grinding model of a solid particle with a simple shape on impact with a hard surface | Abstract |
(Rus) |
Guryanov G.A., Abdeev B.M., Klimenko Y.A. | |||
No 3 (2018) | Finite element study of mixed mode loading of the cracked semicircular disc under bending | Abstract |
(Rus) |
Stepanova L.V., Frolov K.V. | |||
No 2 (2018) | Modelling of the amplitude of transverse vibrations of a homogeneous rod upon impact against a rigid obstacle taking into account its own weight | Abstract |
(Rus) |
Bityrin A.A. | |||
No 4 (2018) | Experimental Study of Short-Term Transient Creep of the Al/SiC Metal-Matrix Composite under Uniaxial Compression | Abstract |
(Rus) |
Smirnov S.V., Kryuchkov D.I., Nesterenko A.V., Berezin I.M., Vichuzhanin D.I. | |||
No 2 (2018) | Mathematical models of nonlinear viscoelasticity with operators of fractional integro-differentiation | Abstract |
(Rus) |
Ogorodnikov E.N., Radchenko V.P., Ungarova L.G. | |||
No 3 (2018) | A fracture locus for a 2 wt% aluminum-graphene metal matrix composite at 300 °C | Abstract |
(Rus) |
Vichuzhanin D.I., Yolshina L.A., Smirnov A.S., Muradymov R.V. | |||
No 4 (2018) | Deformation and Strength Properties Prediction of Metals with Uniformly Distributed Closed Pores under Single and Cyclic Loading | Abstract |
(Rus) |
Poroshin V.B., Shlishevsky A.V. | |||
No 3 (2018) | Application of speckle dynamics and Raman light scattering to study the fracture features of pipe steel at high-cycle fatigue | Abstract |
(Rus) |
Vladimirov A.P., Ponosov Y.S. | |||
No 2 (2018) | The properties of the structure of disperse-filled polymer composites | Abstract |
(Rus) |
Dyshin O.A., Habibov I.A., Rustamova K.B. | |||
No 4 (2018) | Construction and analysis of finite-element models of inhomogeneous deformable solids based on scanning | Abstract |
(Rus) |
Pykhalov A.A., Duong V.L., Tolstikov V.G. | |||
No 1 (2018) | A mathematical model for hydraulic fracture propagation in three dimensional poroelastic medium | Abstract |
(Rus) |
Savenkov E.B., Borisov V.E. | |||
No 3 (2018) | A Thermodiffusion Problem of Hydrogenation of a Steel Shell Structure | Abstract |
(Rus) |
Emel'yanov I.G., Mironov V.I. | |||
No 4 (2018) | Elimination of a Rigid Body Oscillations Suspended on a Variable-Length Cable with a Controlled Horizontal Suspension Movement | Abstract |
(Rus) |
Russkikh S.V., Shklyarchuk F.N. | |||
No 3 (2018) | On Evaluating the State of Steel Specimens using Dynamic Spectrograms of Acoustic Signals | Abstract |
(Rus) |
Gubin V.V., Anikeev N.A., Dyachenko D.I. | |||
No 2 (2018) | Stability of orthotropic doubly curved shallow shells with a movable hinged fixing of the border | Abstract |
(Rus) |
Kamenev I.V., Semenov A.A. | |||
No 4 (2018) | Dynamic deformation interaction of elements of the “drummer-gasket-reinforced concrete beam” system | Abstract |
(Rus) |
Sobyanin K.V., Shardakov I.N., Shestakov A.P., Glot I.O. | |||
No 1 (2018) | Numerical study of a thermomechanical behavior of a crystallizing polymer medium with regard to finite deformations | Abstract |
(Rus) |
Kulikov R.G., Kulikova T.G., Smetannikov O.Y. | |||
No 3 (2018) | Experimental studies of the effect of steel damage on the patterns of surface waves propagation | Abstract |
(Rus) |
Ilyahinsky A.V., Rodyushkin V.M. | |||
No 4 (2018) | Load interaction effects during near-threshold fatigue crack growth under variable amplitude: theory, model, experiment | Abstract |
(Rus) |
Savkin A.N., Sunder R., Denisevich D.S., Sedov A.A., Badikov K.A. | |||
No 4 (2018) | Features of Deformation Behavior of Structural Steel during Forging | Abstract |
(Rus) |
Andreyachshenko V.A., Isheva Y.B. | |||
No 2 (2018) | Mechanics of collisions of solids: influence of friction and adhesion. I. Review of experimental and theoretical works | Abstract |
(Rus) |
Lyashenko I.A., Willert E., Popov V.L. | |||
No 4 (2018) | Determination of elastic and dissipative properties of concrete under dynamic deformation | Abstract |
(Rus) |
Shardakov I.N., Shestakov A.P., Glot I.O. | |||
No 1 (2018) | Plastic deformation of materials sensitive to a type of stress state | Abstract |
(Rus) |
Bondar V.S., Abashev D.R. | |||
No 3 (2018) | FEATURES OF STRESS-STRAIN STATE OF THIN-WALLED CIRCULAR SINGLE-EDGE-NOTCH SPECIMEN UNDER ECCENTRIC TENSION | Abstract |
(Rus) |
Konovalov A.V., Kozlov A.V., Konovalov D.A., Partin A.S. | |||
No 4 (2018) | On Modeling of Overhead TLC Galloping and Parametric Analysis of Pendulum Dampers Efficiency | Abstract |
(Rus) |
Sergey I.I., Vinogradov A.A., Danilin A.N., Kurdyumov N.N. | |||
No 4 (2018) | THE STRESS-STRAIN STATE AND DURATION UNTIL FRACTURE OF ROTATING DISKS IN CREEP | Abstract |
(Rus) |
Banshchikova I.A. | |||
No 2 (2018) | The aerodynamic component of the damping of cantilevered test specimens oscillating near a rigid shield | Abstract |
(Rus) |
Paimushin V.N., Firsov V.A., Gazizullin R.K., Shishkin V.M. | |||
No 4 (2018) | Optimization of mechanical characteristics of models of laminate composites using embedded optical fiber strain sensors | Abstract |
(Rus) |
Tashkinov M.A., Matveenko V.P. | |||
No 1 (2018) | Experimental and theoretical study of the relation between phase and structural deformations in shape memory alloys | Abstract |
(Rus) |
Tikhomirova K.A. | |||
No 3 (2018) | The density of deformation distribution in a plane of VT1-00 sample under uniaxial strain | Abstract |
(Rus) |
Rekov A.M., Vichuzhanin D.I. | |||
No 4 (2018) | The Problem Solution of Natural Vibrations of Electroelastic Bodies with External Electric Circuits Based on Their Electrical Analogue | Abstract |
(Rus) |
Iurlov M.A., Oshmarin D.A., Sevodina N.V., Iurlova N.A. | |||
No 4 (2018) | Identification of the inhomogeneous cylindrical waveguide properties | Abstract |
(Rus) |
Vatulyan A.O., Yavruyan O.V., Bogachev I.V. | |||
No 2 (2018) | Resonant diagnostics of temperature distribution by the piezo-electro-luminescent fiber-optical sensor according to the solution of the Fredholm integral equation | Abstract |
(Rus) |
Pan’kov A.A. | |||
No 4 (2018) | Applied theory of inelasticity | Abstract |
(Rus) |
Bondar V.S., Abashev D.R. | |||
No 1 (2018) | INHOMOGENEITIES IN GRAINS OF POLYCRYSTALLINE MATERIALS AND ESHELBY PROBLEM | Abstract |
(Rus) |
Tashkinov A.A., Shavshukov V.E. | |||
No 3 (2018) | Fatigue crack growth kinetic on steels under variable amplitude loading | Abstract |
(Rus) |
Savkin A.N., Sunder R., Badikov K.A., Sedov A.A. | |||
No 4 (2018) | Generalized dynamic theory of a solid particle grinding by pulse-force compression with two non-deformable balls | Abstract |
(Rus) |
Abdeev B.M., Baigereyev S.R., Guryanov G.A. | |||
No 4 (2018) | Numerical simulation for development of methodology of stress-strain state control of composite bulkhead for aviation application with the usage of FBG sensors | Abstract |
(Rus) |
Anoshkin A.N., Zuiko V.Y., Pelenev K.A., Pisarev P.V., Shipunov G.S. | |||
No 2 (2018) | Analysis of stress-strain state of dental implants by the boundary integral equations method | Abstract |
(Rus) |
Perelmuter M.N. | |||
No 4 (2018) | RELIABILITY ASSESSMENT OF MULTILAYER PIPES FROM POLYMER MATERIALS | Abstract |
(Rus) |
Bochkareva S.A., Grishaeva N.Y., Lyukshin B.A., Lsukshin P.A., Matolygina N.Y., Panin S.V., Reutov Y.A. | |||
No 1 (2018) | Mathematical model of pulse scanning of pressure along a piezo-electro-luminescent fiber-optical sensor | Abstract |
(Rus) |
Pan’kov A.A. | |||
No 3 (2018) | Computational simulation of the damage accumulation processes in cracked solids by the user procedure UMAT of Simulia Abaqus | Abstract |
(Rus) |
Stepanova L.V. | |||
No 4 (2018) | The methodical Aspects of Strength, Deformation and Energy characteristic Determination of Salt Rocks under Direct Tensile Loading of Rock Specimens in Laboratory Conditions | Abstract |
(Rus) |
Asanov V.A., Pankov I.L., Kuzminyh V.S., Morozov I.A. | |||
No 2 (2018) | Experimental and FEM short-term tensile strength assessment of U- and sharp V-notched specimens made of ductile material | Abstract |
(Rus) |
Sapozhnikov S.B., Leshkov E.V., Ivanov M.A., Yaroslavtsev S.I., Shcherbakov I.A. | |||
No 4 (2018) | Influence of the biaxial loading regimes on fatigue life of 2024 aluminum alloy and 40CrMnMo steel | Abstract |
(Rus) |
Wildemann V.E., Tretyakov M.P., Staroverov O.A., Yankin A.S. | |||
No 1 (2018) | A model of crystallization process taking into account phase changes in formation of a metallic material by laser fusion method | Abstract |
(Rus) |
Suhodoeva T.S., Kamenskikh A.A., Maksimov P.V. | |||
No 3 (2018) | Interactions of Pipe Instabilities under Static Loading | Abstract |
(Rus) |
Khakimov A.G. | |||
No 4 (2018) | The Experimental and Theoretical Study of Large Deformations of Cylindrical Samples from Steel 09G2S with Stress Concentrators under Tension-Torsion Loading to Failure | Abstract |
(Rus) |
Bazhenov V.G., Kazakov D.A., Nagornykh E.V., Osetrov D.L., Ryabov A.A. | |||
No 2 (2018) | A method for converting an experimental torsion diagram for a cylindrical specimen to the stress-strain diagram of the material | Abstract |
(Rus) |
Struzhanov V.V., Vichuzhanin D.I. | |||
No 4 (2018) | Mechanics of collisions of solids: influence of friction and adhesion. II Numerical modeling | Abstract |
(Rus) |
Lyashenko I.A., Willert E., Popov V.L. | |||
No 1 (2018) | ESTIMATION OF THE CYLINDRICAL COMPOSITE SHELL STIFFNESS AT THE INITIAL STAGE OF CURING DURING DEPLOYMENT BY INTERNAL PRESSURE | Abstract |
(Rus) |
Gilev V.G., Rusakov S.V., Pestrenin V.M., Pestrenin I.V. | |||
No 3 (2018) | Construction of a Representative Model Based on Computed Tomography | Abstract |
(Rus) |
Kharin N.V., Vorobyev O.V., Berezhnoi D.V., Sachenkov O.A. | |||
No 4 (2018) | Method for calculating acoustic stresses in six-beam diffraction in layered media | Abstract |
(Rus) |
Belyayev Y.N. | |||
No 2 (2018) | Models of molecular dynamics: a review of EAM-potentials. Part 2. Potentials for multi-component systems | Abstract |
(Rus) |
Volegov P.S., Gerasimov R.M., Davlyatshin R.P. | |||
No 4 (2018) | Contact problems for an elastic inhomogeneous body with a cylindrical cavity | Abstract |
(Rus) |
Pozharskii D.A., Pozharskaya E.D. | |||
No 1 (2018) | Modelling the formation of new material surfaces during adhesive delamination of a composite | Abstract |
(Rus) |
Glagolev V.V., Markin A.A., Fursaev A.A. | |||
No 3 (2018) | Review of experimental studies on structural superplasticity: internal structure evolution of material and deformation mechanisms | Abstract |
(Rus) |
Sharifullina E.R., Shveykin A.I., Trusov P.V. | |||
301 - 400 of 659 Items | << < 1 2 3 4 5 6 7 > >> |