| Issue |
Title |
| No 4 (2018) |
Experimental Study of Short-Term Transient Creep of the Al/SiC Metal-Matrix Composite under Uniaxial Compression |
|
|
Smirnov S.V., Kryuchkov D.I., Nesterenko A.V., Berezin I.M., Vichuzhanin D.I. |
| No 4 (2013) |
Metodicheskie voprosy eksperimental'nykh issledovaniy vyazkouprugikh napolnennykh polimernykh kompozitov pri slozhnykh dinamicheskikh tsiklicheskikh vozdeystviyakh |
|
|
Yankin A.S., Bul'bovich R.V., Slovikov S.V., Vil'deman V.E. |
| No 1 (2020) |
Two methods for calculating the stress-strain state of shape memory alloy constructions taking into account tension-compression asymmetry |
|
|
Stolbova O.S., Tikhomirova K.A. |
| No 3 (2014) |
ROTATIONAL DEFORMATION MODE OF POROUS STRUCTURES |
|
|
Avdeenko A.M., Krupin Y.A., Pimenova N.A. |
| No 5 (2023) |
METHODS AND RESULTS OF STUDYING THE PORTEVIN – LE CHATELIER EFFECT: EXPERIMENTS AND MACROPHENOMENOLOGICAL MODELS |
|
|
Trusov P.V., Chechulina Е.А. |
| No 3 (2025) |
IRREVERSIBLE DEFORMING AND HEATING OF AN ELASTOVISCOPLASTIC MATERIAL IN A ROUND PIPE WITH A LUBRICANT LAYER |
|
|
Kovtanyuk L.V., Panchenko G.L., Popova E.O. |
| No 3 (2025) |
USING ARTIFICIAL NEURAL NETWORKS TO REFINE AND ANALYZE THE RESULTS OF ATOMIC FORCE MICROSCOPY OF DISPERSED FILLED ELASTOMERS (CONTACT AND SEMI-CONTACT MODES) |
|
|
Garishin O.K., Sokolov A.K. |
| No 1 (2013) |
Simulation of the stress-strain state of thin composite coatings based on solutions of the plane problem of strain-gradient elasticity for a layer |
|
|
Lurie S.A., Solyaev Y.O., Rabinsky L.N., Kondratova Y.N., Volov M.I. |
| No 3 (2019) |
Numerical Simulation of the Phase Transition Control in Torsion of a Hollow Cylinder Made of Heusler Alloy |
|
|
Rogovoy A.A., Stolbova O.S. |
| No 3 (2016) |
A numerical study of stress-strain state evolution in structurally inhomogeneous materials subjected to uniaxial loading |
|
|
Smirnov S.V., Konovalov A.V., Myasnikova M.V., Khalevitsky Y.V., Smirnov A.S. |
| No 1 (2024) |
STRESS-STRAIN STATE OF THIN-WALLED PIPE BLANKS DURING CRIMPING IN A CURVED AXISYMMETRIC MATRIX |
|
|
Andrianov I.K., Feoktistov S.I., Maryin S.B. |
| No 2 (2022) |
Analysis of the limiting states of cylindrical elastic-plastic shells under tension and combined loading by internal pressure and tension |
|
|
Bazhenov V.G., Kazakov D.A., Osetrov S.L., Osetrov D.L., Ryabov A.A. |
| No 4 (2017) |
ESTIMATION OF CRACK PROPAGATION DIRECTION ANGLE UNDER MIXED-MODE LOADING (MODE I AND MODE II): GENERALIZED FRACTURE MECHANICS CRITERIA AND ATOMISTIC MODELING (MOLECULAR DYNAMICS METHOD) |
|
|
Stepanova L.V., Bronnikov S.A., Belova O.N. |
| No 6 (2023) |
METHOD OF ESTIMATING PLASTIC DEFORMATION DISTRIBUTIONS AT THE FATIGUE CRACK TIP BASED ON THE SOLUTION OF LINEAR ELASTICITY THEORY |
|
|
Vshivkov A.N., Iziumova A.Y., Panteleev I.A., Plekhov O.A. |
| No 4 (2018) |
The Experimental and Theoretical Study of Large Deformations of Cylindrical Samples from Steel 09G2S with Stress Concentrators under Tension-Torsion Loading to Failure |
|
|
Bazhenov V.G., Kazakov D.A., Nagornykh E.V., Osetrov D.L., Ryabov A.A. |
| No 4 (2021) |
DETERMINATION OF THE STRESS STATE AND THE FORCE OF DEFORMATION OF BALL-SHAPED BILLETS IN A CLOSED MATRIX |
|
|
Ashkeyev Z.A., Andreyachshenko V.A., Abishkenov M.Z., Bukanov Z.U. |
| No 1 (2020) |
The Nonlinear evolutionary problem for self-stressed multilayered hyperelastic spherical bodies |
|
|
Lychev S.A., Lycheva T.N., Koifman K.G. |
| No 4 (2017) |
Theoretical and experimental study of structural elements’ influence of fiber-optic strain sensor on its readings and correction procedure for transfer function |
|
|
Sozonov N.S., Shardakov I.N. |
| No 4 (2018) |
The methodical Aspects of Strength, Deformation and Energy characteristic Determination of Salt Rocks under Direct Tensile Loading of Rock Specimens in Laboratory Conditions |
|
|
Asanov V.A., Pankov I.L., Kuzminyh V.S., Morozov I.A. |
| No 3 (2021) |
Effect of plastic compressibility on the strain rate intensity factor in compression of a material layer between parallel plates |
|
|
Lyamina E.A., Novozhilova O.V. |
| No 4 (2014) |
Method of determining endurance limit stress of cylindrical specimens made of structural steels by residual stresses of “check test piece” |
|
|
Saushkin M.N., Sazanov V.P., Vakulyuk V.S. |
| No 1 (2020) |
The Applied model of grinding a spherical solid particle with a direct impact on a non-deformable flat surface |
|
|
Guryanov G.A., Abdeev B.M. |
| No 3 (2017) |
The numerical model of dynamic mechanical behavior of brittle materials based on the concept of the kinetic theory of strength |
|
|
Grigoriev A.S., Shilko E.V., Skripnyak V.A., Chernyavsky A.G., Psakhie S.G. |
| No 4 (2023) |
APPLICATION OF THE FINITE ELEMENT METHOD IN COMBINATION WITH THE CONTACT LAYER METHOD TO DETERMINE THE STRESS-STRAIN STATE OF MULTILAYER BEAMS |
|
|
Chepurnenko A.S., Turina V.S. |
| No 1 (2019) |
Development of the Digital Image Correlation Method to Study Deformation and Fracture Processes of Structural Materials |
|
|
Lyubutin P.S., Panin S.V., Titkov V.V., Eremin A.V., Sunder R. |
| No 3 (2021) |
The Experimental study of plastic strain localization in the AMg6 alloy under various types of dynamic loads |
|
|
Sokovikov M.A., Oborin V.A., Chudinov V.V., Uvarov S.V., Naimark O.B. |
| No 2 (2015) |
Features of strain localization in sylvinite under tension |
|
|
Panteleev I.A., Plekhov O.A., Naimark O.B., Evseev A.V., Pankov I.L., Asanov V.A. |
| No 1 (2020) |
The Theoretical and experimental study of the bending of a thin substrate during electrolytic deposition |
|
|
Bout D.K., Bychkov P.S., Lychev S.A. |
| No 4 (2017) |
CRITICAL DYNAMICS OF LOCALIZED INSTABILITIES OF PLASTIC FLOW IN THE AL-MG ALLOY |
|
|
Efremov D.V., Oborin V.A., Uvarov S.V., Naimark O.B. |
| No 4 (2023) |
BERNOULLI HYPOTHESES IN THE PROBLEM OF BENDING A MECHANICALLY INCOMPRESSIBLE BEAM |
|
|
Firsanov V.V. |
| No 1 (2019) |
The Effect of Preliminary Plastic Hardening by Tension on the Cylindrical Shells Buckling during Torsion |
|
|
Bazhenov V.G., Zhegalov D.V., Kazakov D.A., Kibec A.I., Nagornykh E.V., Samsonova D.A. |
| No 3 (2021) |
ABOUT THE YIELD PLATEAU UNDER SIGN-VARIABLE LOADING |
|
|
Rychkov B.A., Goncharova I.V., Rezin P.M. |
| No 2 (2015) |
Experimental finding of dynamic deformation fields in metal and composite plates under impact |
|
|
Nikhamkin M.S., Voronov L.V., Bolotov B.P. |
| No 1 (2025) |
THE HARDENING TYPE INFLUENCE OF PRESSURE VESSEL RATCHETING IN CASE OF THERMAL CYCLIC LOADS |
|
|
Fedorenko R.V., Lukin A.V., Murtazin I.R. |
| No 4 (2019) |
Elastoplastic interaction of grains in polycrystalline materials |
|
|
Tashkinov A.A., Shavshukov V.E. |
| No 1 (2018) |
Applied grinding model of a solid particle with a simple shape on impact with a hard surface |
|
|
Guryanov G.A., Abdeev B.M., Klimenko Y.A. |
| No 4 (2023) |
EXPERIMENTAL AND THEORETICAL INVESTIGATIONS OF STRUCTURAL MECHANISMS AND PLASTIC STRAIN LOCALIZATION EFFECTS IN ALMG6 ALLOY UNDER DYNAMIC LOADING |
|
|
Sokovikov M.A., Simonov M.Y., Chudinov V.V., Uvarov S.V., Oborin V.A., Naimark O.B. |
| No 1 (2014) |
Mathematical models of growth deformation |
|
|
Dolganova O.Y., Lokhov V.A. |
| No 3 (2021) |
Simulation of impact failure of tubular samples made of composite material, depending on the loading rate |
|
|
Fedorenko A.N., Fedulov B.N., Lomakin E.V. |
| No 4 (2015) |
Biharmonic (two-frequency) load frequencies influence on mechanical behavior of solid propellant simulator |
|
|
Yankin A.S. |
| No 1 (2025) |
Application of the Experimental-Calculation Approach for Identification of Deformation and Strength Characteristics of Elastic-Plastic Materials under Quasi- Static and Dynamic Loading |
|
|
Bazhenov V.G., Konstantinov A.Y., Kukanov S.S., Osetrov D.L., Ryabov A.A. |
| No 3 (2019) |
The Phenomenological Model of Hyper Viscoelasticity of Elastomers with a Constant Orientation of the Main Stress Axes in the Accompanying Frame of Reference |
|
|
Korneyev V.S., Korneyev S.A. |
| No 1 (2018) |
INHOMOGENEITIES IN GRAINS OF POLYCRYSTALLINE MATERIALS AND ESHELBY PROBLEM |
|
|
Tashkinov A.A., Shavshukov V.E. |
| No 4 (2023) |
INVESTIGATION OF THE STABILITY OF FBG SENSOR MEASUREMENTS UNDER VARIOUS CLIMATIC CONDITIONS |
|
|
Serovaev G.S., Kosheleva N.A. |
| No 2 (2021) |
Modeling the Mechanical Response of Auxetic Metamaterials to Dynamic Effects |
|
|
Skripnyak V.V., Chirkov M.O., Skripnyak V.A. |
| No 3 (2016) |
Finite element analysis of biaxial cyclic tensile loading of elasto-plastic plate with central elliptical hole |
|
|
Turkova V.A., Stepanova L.V. |
| No 3 (2024) |
NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF DYNAMIC DEFORMATION AND FAILURE ON IMPACT OF RECTANGULAR PLATES |
|
|
Bazhenov V.G., Ryabov A.A., Kukanov S.S., Ptitsyn S.O. |
| No 1 (2018) |
Experimental and theoretical study of the relation between phase and structural deformations in shape memory alloys |
|
|
Tikhomirova K.A. |
| No 4 (2023) |
ANALYSIS OF METHODS FOR CONSTRUCTING TRUE DEFORMATION DIAGRAMS OF ELASTOPLASTIC MATERIALS UNDER LARGE DEFORMATIONS |
|
|
Bazhenov V.G., Kazakov D.A., Kukanov S.S., Osetrov D.L., Ryabov A.A. |
| No 1 (2013) |
Numerical algorithm of solving the problem of large elastic-plastic deformation by FEM |
|
|
Davydov R.L., Sultanov L.U. |
| No 4 (2020) |
Estimating of mechanical stresses, plastic deformations and damage by means of acoustic anisotropy |
|
|
Belyaev A.K., Polyanskiy V.A., Tretyakov D.A. |
| No 1 (2024) |
MODELING OF HIGH-RATE HARDENING OF A POLYMER COMPOSITE MATERIAL UNDER LOADING ALONG THE REINFORCEMENT DIRECTION |
|
|
Fedulov B.N., Konstantinov A.Y., Fedorenko A.N., Sergeichev I.V. |
| No 2 (2019) |
Modeling of Strands Formation in Elastomeric Composites |
|
|
Sokolov A.K., Garishin O.K., Svistkov A.L. |
| No 1 (2018) |
Numerical study of a thermomechanical behavior of a crystallizing polymer medium with regard to finite deformations |
|
|
Kulikov R.G., Kulikova T.G., Smetannikov O.Y. |
| No 3 (2023) |
FINITE-STRAIN ELASTIC-PLASTIC TORSION: ANALYTICAL AND FEM MODELING FOR NONMONOTONICALLY HARDENING POLYMERS |
|
|
Sevastyanov G.M., Bormotin K.S. |
| No 1 (2013) |
Estimation of the stress-strain state of the revolving long cylinder |
|
|
Boyarshinov M.G. |
| No 4 (2020) |
On a modeling stress-controlled surface growth of solids |
|
|
Izmaylova Y.O., Freidin A.B. |
| No 3 (2016) |
Structural geometrical transitions under dynamic loading of materials |
|
|
Savenkov G.G., Kuznetsov A.V., Bragov A.M., Konstantinov A.Y., Lomunov A.K. |
| No 1 (2024) |
CALCULATION OF STATIC DEFORMATION OF AXISYMMETRIC SHELLS OF ROTATION WITH DIFFERENTIAL MODEL |
|
|
Nguyen C.M., Shelevaya D.R., Krasnorutskiy D.A. |
| No 2 (2019) |
The Investigation of the Initial Stress-Strain State Influence on Mechanical Properties of Viscoelastic Bodies |
|
|
Bogachev I.V., Vatulyan A.O., Dudarev V.V., Nedin R.D. |
| No 2 (2023) |
DESCRIPTION OF THE EFFECT OF SOFTENING IN ELASTOMERIC COMPOSITES OBSERVED IN TESTS WITH INCREASING STRAIN AMPLITUDE |
|
|
Kislitsyn V.D., Svistkov A.L., Mokhireva K.A., Shadrin V.V. |
| No 2 (2013) |
Instability of plastic shear and plastic deformation localization caused by structural kinetic transitions in mezodefect ensembles under dynamic loading conditions |
|
|
Sokovikov M.A., Chudinov V.V., Uvarov S.V., Plekhov O.A., Lyapunova E.A., Petrova A.N., Bayandin Y.V., Naimark O.B., Brodova I.G. |
| No 4 (2020) |
Numerical simulation of deformation and fracture of metal-matrix composites with considering residual stresses |
|
|
Zemlianov A.V., Evtushenko E.P., Balokhonov R.R. |
| No 2 (2016) |
Special features of numerical simulation for elastic-plastic buckling of hemispherical shells under loading with the rigid indenter |
|
|
Bazhenov V.G., Demareva A.V., Zhestkov M.N., Kibets A.I. |
| No 1 (2024) |
ON IDENTIFICATION OF PARAMETERS OF A NONLINEAR CONSOLIDATION MODEL OF SANDY SOIL |
|
|
Artamonova N.B., Sheshenin S.V. |
| No 2 (2019) |
Description of the Effect of AlMg6 Alloy Strength Decrease during Temperature Increase under Dynamic Loading |
|
|
Bilalov D.A., Sokovikov M.A., Bayandin Y.V., Chudinov V.V., Oborin V.A., Naimark O.B. |
| No 2 (2023) |
STRESS-STRAIN STATE DURING DRAFT OF WIDE BANDS WITH SHEAR |
|
|
Ashkeyev Z.A., Andreyachshenko V.A., Nogaev K.A., Bukanov Z.U. |
| No 3 (2014) |
FEATURES OF BEHAVIOR OF LOW-MODULUS VISCOELASTIC POLYMER COMPOSITES UNDER CHANGING STRAIN AMPLITUDE OF LOW-FREQUENCY COMPONENT OF BIHARMONIC LOAD |
|
|
Yankin A.S., Bulbovich R.V., Slovikov S.V., Wildemann V.E. |
| No 2 (2020) |
The method of reconstruction of residual stresses and plastic deformations in thin-walled pipelines in the delivery state and after bilateral vibro-shock surface hardening with a shot |
|
|
Radchenko V.P., Pavlov V.P., Berbasova T.I., Saushkin M.N. |
| No 1 (2017) |
Serrated yielding: crystal viscoplastic models |
|
|
Trusov P.V., Chechulina E.A. |
| 1 - 70 of 70 Items |
|
