ARTICLES
| Issue | Title | Abstract | File |
| No 4 (2019) | The Torsion Problem of a Cylindrical Solid Taking Into Account the Material Weakening | Abstract |
 (Rus) |
| Wildemann V.E., Mugatarov A.I. | |||
| No 1 (2019) | Development of the Digital Image Correlation Method to Study Deformation and Fracture Processes of Structural Materials | Abstract |
(Rus) |
| Lyubutin P.S., Panin S.V., Titkov V.V., Eremin A.V., Sunder R. | |||
| No 2 (2019) | Modeling of Strands Formation in Elastomeric Composites | Abstract |
(Rus) |
| Sokolov A.K., Garishin O.K., Svistkov A.L. | |||
| No 4 (2019) | New analytical solutions for vibration problem of thick plates | Abstract |
(Rus) |
| Papkov S.O. | |||
| No 3 (2019) | About Electrical Conductivity of the Epoxy Matrix with Carbon Nanotubes | Abstract |
(Rus) |
| Semenov V.A., Rusakov S.V., Gilev V.G. | |||
| No 2 (2019) | Research methods of structural and phase transformations in nanomaterials deformed under pressure | Abstract |
(Rus) |
| Vasil’ev L.S., Lomaev S.L. | |||
| No 4 (2019) | Nonstationary 1D Dynamics Problems for Heteromodular Elasticity with Piecewise-Linear Approximation of Boundary Conditions | Abstract |
(Rus) |
| Dudko O.V., Lapteva A.A., Ragozina V.E. | |||
| No 1 (2019) | Identification of elastic parameters of composite using experimental data on modal characteristics of samples | Abstract |
(Rus) |
| Nikhamkin M.S., Solomonov D.G., Silberschmidt V.V. | |||
| No 2 (2019) | Method of calculation of elastic effective properties of two-phase polydisperse media using multipoint statistical descriptors and the integral equations technique | Abstract |
(Rus) |
| Tashkinov M.A. | |||
| No 4 (2019) | Experimental analysis of the effect of discrete aggregate on the bending stability of thin-walled cylindrical shells | Abstract |
(Rus) |
| Petrov M.V. | |||
| No 3 (2019) | Simulation of the interaction fullerite C60 with the substrate solids | Abstract |
(Rus) |
| Suvorov S.V., Severiuchin A.V., Vakhrushev A.V. | |||
| No 2 (2019) | An asymptotic Solution of the Hypersingular Boundary Integral Equation Simulating Wave Scattering by the Interface Strip-Like Crack | Abstract |
(Rus) |
| Doroshenko O.V., Kirillova E.V., Fomenko S.I. | |||
| No 4 (2019) | Energy product in a crack-like defect model under loading of mode II type | Abstract |
(Rus) |
| Glagolev V.V., Glagolev L.V., Markin A.A. | |||
| No 1 (2019) | Lifetime of AMg6 Alloy under Consecutive Shock-Wave and Gigacycle Loading | Abstract |
(Rus) |
| Oborin V.A., Bannikov M.V., Bayandin Y.V., Naimark O.B. | |||
| No 2 (2019) | Modeling the Dynamic Behavior of Spatially Reinforced Plates of Nonlinear Elastic Materials within the Refined Bending Theory | Abstract |
(Rus) |
| Yankovskii A.P. | |||
| No 4 (2019) | Identification of crack-like defect and investigation of stress concentration in coated bar | Abstract |
(Rus) |
| Sobol B.V., Soloviev A.N., Rashidova E.V., Vasiliev P.V. | |||
| No 1 (2018) | Numerical study of a thermomechanical behavior of a crystallizing polymer medium with regard to finite deformations | Abstract |
(Rus) |
| Kulikov R.G., Kulikova T.G., Smetannikov O.Y. | |||
| No 3 (2018) | Experimental studies of the effect of steel damage on the patterns of surface waves propagation | Abstract |
(Rus) |
| Ilyahinsky A.V., Rodyushkin V.M. | |||
| No 4 (2018) | Load interaction effects during near-threshold fatigue crack growth under variable amplitude: theory, model, experiment | Abstract |
(Rus) |
| Savkin A.N., Sunder R., Denisevich D.S., Sedov A.A., Badikov K.A. | |||
| No 4 (2018) | Features of Deformation Behavior of Structural Steel during Forging | Abstract |
(Rus) |
| Andreyachshenko V.A., Isheva Y.B. | |||
| No 2 (2018) | Mechanics of collisions of solids: influence of friction and adhesion. I. Review of experimental and theoretical works | Abstract |
(Rus) |
| Lyashenko I.A., Willert E., Popov V.L. | |||
| No 4 (2018) | Determination of elastic and dissipative properties of concrete under dynamic deformation | Abstract |
(Rus) |
| Shardakov I.N., Shestakov A.P., Glot I.O. | |||
| No 1 (2018) | Plastic deformation of materials sensitive to a type of stress state | Abstract |
(Rus) |
| Bondar V.S., Abashev D.R. | |||
| No 3 (2018) | FEATURES OF STRESS-STRAIN STATE OF THIN-WALLED CIRCULAR SINGLE-EDGE-NOTCH SPECIMEN UNDER ECCENTRIC TENSION | Abstract |
(Rus) |
| Konovalov A.V., Kozlov A.V., Konovalov D.A., Partin A.S. | |||
| No 4 (2018) | On Modeling of Overhead TLC Galloping and Parametric Analysis of Pendulum Dampers Efficiency | Abstract |
(Rus) |
| Sergey I.I., Vinogradov A.A., Danilin A.N., Kurdyumov N.N. | |||
| No 4 (2018) | THE STRESS-STRAIN STATE AND DURATION UNTIL FRACTURE OF ROTATING DISKS IN CREEP | Abstract |
(Rus) |
| Banshchikova I.A. | |||
| No 2 (2018) | The aerodynamic component of the damping of cantilevered test specimens oscillating near a rigid shield | Abstract |
(Rus) |
| Paimushin V.N., Firsov V.A., Gazizullin R.K., Shishkin V.M. | |||
| No 4 (2018) | Optimization of mechanical characteristics of models of laminate composites using embedded optical fiber strain sensors | Abstract |
(Rus) |
| Tashkinov M.A., Matveenko V.P. | |||
| No 1 (2018) | Experimental and theoretical study of the relation between phase and structural deformations in shape memory alloys | Abstract |
(Rus) |
| Tikhomirova K.A. | |||
| No 3 (2018) | The density of deformation distribution in a plane of VT1-00 sample under uniaxial strain | Abstract |
(Rus) |
| Rekov A.M., Vichuzhanin D.I. | |||
| No 4 (2018) | The Problem Solution of Natural Vibrations of Electroelastic Bodies with External Electric Circuits Based on Their Electrical Analogue | Abstract |
(Rus) |
| Iurlov M.A., Oshmarin D.A., Sevodina N.V., Iurlova N.A. | |||
| No 4 (2018) | Identification of the inhomogeneous cylindrical waveguide properties | Abstract |
(Rus) |
| Vatulyan A.O., Yavruyan O.V., Bogachev I.V. | |||
| No 2 (2018) | Resonant diagnostics of temperature distribution by the piezo-electro-luminescent fiber-optical sensor according to the solution of the Fredholm integral equation | Abstract |
(Rus) |
| Pan’kov A.A. | |||
| No 4 (2018) | Applied theory of inelasticity | Abstract |
(Rus) |
| Bondar V.S., Abashev D.R. | |||
| No 1 (2018) | INHOMOGENEITIES IN GRAINS OF POLYCRYSTALLINE MATERIALS AND ESHELBY PROBLEM | Abstract |
(Rus) |
| Tashkinov A.A., Shavshukov V.E. | |||
| No 3 (2018) | Fatigue crack growth kinetic on steels under variable amplitude loading | Abstract |
(Rus) |
| Savkin A.N., Sunder R., Badikov K.A., Sedov A.A. | |||
| No 4 (2018) | Generalized dynamic theory of a solid particle grinding by pulse-force compression with two non-deformable balls | Abstract |
(Rus) |
| Abdeev B.M., Baigereyev S.R., Guryanov G.A. | |||
| No 4 (2018) | Numerical simulation for development of methodology of stress-strain state control of composite bulkhead for aviation application with the usage of FBG sensors | Abstract |
(Rus) |
| Anoshkin A.N., Zuiko V.Y., Pelenev K.A., Pisarev P.V., Shipunov G.S. | |||
| No 2 (2018) | Analysis of stress-strain state of dental implants by the boundary integral equations method | Abstract |
(Rus) |
| Perelmuter M.N. | |||
| No 4 (2018) | RELIABILITY ASSESSMENT OF MULTILAYER PIPES FROM POLYMER MATERIALS | Abstract |
(Rus) |
| Bochkareva S.A., Grishaeva N.Y., Lyukshin B.A., Lsukshin P.A., Matolygina N.Y., Panin S.V., Reutov Y.A. | |||
| No 1 (2018) | Mathematical model of pulse scanning of pressure along a piezo-electro-luminescent fiber-optical sensor | Abstract |
(Rus) |
| Pan’kov A.A. | |||
| No 3 (2018) | Computational simulation of the damage accumulation processes in cracked solids by the user procedure UMAT of Simulia Abaqus | Abstract |
(Rus) |
| Stepanova L.V. | |||
| No 4 (2018) | The methodical Aspects of Strength, Deformation and Energy characteristic Determination of Salt Rocks under Direct Tensile Loading of Rock Specimens in Laboratory Conditions | Abstract |
(Rus) |
| Asanov V.A., Pankov I.L., Kuzminyh V.S., Morozov I.A. | |||
| No 2 (2018) | Experimental and FEM short-term tensile strength assessment of U- and sharp V-notched specimens made of ductile material | Abstract |
(Rus) |
| Sapozhnikov S.B., Leshkov E.V., Ivanov M.A., Yaroslavtsev S.I., Shcherbakov I.A. | |||
| No 4 (2018) | Influence of the biaxial loading regimes on fatigue life of 2024 aluminum alloy and 40CrMnMo steel | Abstract |
(Rus) |
| Wildemann V.E., Tretyakov M.P., Staroverov O.A., Yankin A.S. | |||
| No 1 (2018) | A model of crystallization process taking into account phase changes in formation of a metallic material by laser fusion method | Abstract |
(Rus) |
| Suhodoeva T.S., Kamenskikh A.A., Maksimov P.V. | |||
| No 3 (2018) | Interactions of Pipe Instabilities under Static Loading | Abstract |
(Rus) |
| Khakimov A.G. | |||
| No 4 (2018) | The Experimental and Theoretical Study of Large Deformations of Cylindrical Samples from Steel 09G2S with Stress Concentrators under Tension-Torsion Loading to Failure | Abstract |
(Rus) |
| Bazhenov V.G., Kazakov D.A., Nagornykh E.V., Osetrov D.L., Ryabov A.A. | |||
| No 2 (2018) | A method for converting an experimental torsion diagram for a cylindrical specimen to the stress-strain diagram of the material | Abstract |
(Rus) |
| Struzhanov V.V., Vichuzhanin D.I. | |||
| No 4 (2018) | Mechanics of collisions of solids: influence of friction and adhesion. II Numerical modeling | Abstract |
(Rus) |
| Lyashenko I.A., Willert E., Popov V.L. | |||
| No 1 (2018) | ESTIMATION OF THE CYLINDRICAL COMPOSITE SHELL STIFFNESS AT THE INITIAL STAGE OF CURING DURING DEPLOYMENT BY INTERNAL PRESSURE | Abstract |
(Rus) |
| Gilev V.G., Rusakov S.V., Pestrenin V.M., Pestrenin I.V. | |||
| No 3 (2018) | Construction of a Representative Model Based on Computed Tomography | Abstract |
(Rus) |
| Kharin N.V., Vorobyev O.V., Berezhnoi D.V., Sachenkov O.A. | |||
| No 4 (2018) | Method for calculating acoustic stresses in six-beam diffraction in layered media | Abstract |
(Rus) |
| Belyayev Y.N. | |||
| No 2 (2018) | Models of molecular dynamics: a review of EAM-potentials. Part 2. Potentials for multi-component systems | Abstract |
(Rus) |
| Volegov P.S., Gerasimov R.M., Davlyatshin R.P. | |||
| No 4 (2018) | Contact problems for an elastic inhomogeneous body with a cylindrical cavity | Abstract |
(Rus) |
| Pozharskii D.A., Pozharskaya E.D. | |||
| No 1 (2018) | Modelling the formation of new material surfaces during adhesive delamination of a composite | Abstract |
(Rus) |
| Glagolev V.V., Markin A.A., Fursaev A.A. | |||
| No 3 (2018) | Review of experimental studies on structural superplasticity: internal structure evolution of material and deformation mechanisms | Abstract |
(Rus) |
| Sharifullina E.R., Shveykin A.I., Trusov P.V. | |||
| No 2 (2018) | Numerical damping of oscillations of beams by using multiple point actuators | Abstract |
(Rus) |
| Atamuratov A.Z., Mikhailov I.E., Taran N.A. | |||
| No 4 (2018) | A Body Failure Model with a Notch Based on the Scalable Linear Parameter | Abstract |
(Rus) |
| Berto F., Glagolev V.V., Markin A.A. | |||
| No 2 (2018) | Modeling of dynamic behavior of reinforced cylindrical shells under elastic-plastic deformation of materials of composition components | Abstract |
(Rus) |
| Yankovskii A.P. | |||
| No 3 (2018) | Modelling the Stress-Strain State of Blades Affected by Plasma Arc for the Food Grinding Plant | Abstract |
(Rus) |
| Veremeichik A.I., Sazonov M.I., Hvisevich V.M. | |||
| No 4 (2018) | Shaped and branched analogs of triangle multi-leaf spring | Abstract |
(Rus) |
| Polilov A.N., Tatus N.A., Tian X. | |||
| No 1 (2018) | Applied grinding model of a solid particle with a simple shape on impact with a hard surface | Abstract |
(Rus) |
| Guryanov G.A., Abdeev B.M., Klimenko Y.A. | |||
| No 3 (2018) | Finite element study of mixed mode loading of the cracked semicircular disc under bending | Abstract |
(Rus) |
| Stepanova L.V., Frolov K.V. | |||
| No 2 (2018) | Modelling of the amplitude of transverse vibrations of a homogeneous rod upon impact against a rigid obstacle taking into account its own weight | Abstract |
(Rus) |
| Bityrin A.A. | |||
| No 4 (2018) | Experimental Study of Short-Term Transient Creep of the Al/SiC Metal-Matrix Composite under Uniaxial Compression | Abstract |
(Rus) |
| Smirnov S.V., Kryuchkov D.I., Nesterenko A.V., Berezin I.M., Vichuzhanin D.I. | |||
| No 2 (2018) | Mathematical models of nonlinear viscoelasticity with operators of fractional integro-differentiation | Abstract |
(Rus) |
| Ogorodnikov E.N., Radchenko V.P., Ungarova L.G. | |||
| No 3 (2018) | A fracture locus for a 2 wt% aluminum-graphene metal matrix composite at 300 °C | Abstract |
(Rus) |
| Vichuzhanin D.I., Yolshina L.A., Smirnov A.S., Muradymov R.V. | |||
| No 4 (2018) | Deformation and Strength Properties Prediction of Metals with Uniformly Distributed Closed Pores under Single and Cyclic Loading | Abstract |
(Rus) |
| Poroshin V.B., Shlishevsky A.V. | |||
| No 3 (2018) | Application of speckle dynamics and Raman light scattering to study the fracture features of pipe steel at high-cycle fatigue | Abstract |
(Rus) |
| Vladimirov A.P., Ponosov Y.S. | |||
| No 2 (2018) | The properties of the structure of disperse-filled polymer composites | Abstract |
(Rus) |
| Dyshin O.A., Habibov I.A., Rustamova K.B. | |||
| No 4 (2018) | Construction and analysis of finite-element models of inhomogeneous deformable solids based on scanning | Abstract |
(Rus) |
| Pykhalov A.A., Duong V.L., Tolstikov V.G. | |||
| No 1 (2018) | A mathematical model for hydraulic fracture propagation in three dimensional poroelastic medium | Abstract |
(Rus) |
| Savenkov E.B., Borisov V.E. | |||
| No 3 (2018) | A Thermodiffusion Problem of Hydrogenation of a Steel Shell Structure | Abstract |
(Rus) |
| Emel'yanov I.G., Mironov V.I. | |||
| No 4 (2018) | Elimination of a Rigid Body Oscillations Suspended on a Variable-Length Cable with a Controlled Horizontal Suspension Movement | Abstract |
(Rus) |
| Russkikh S.V., Shklyarchuk F.N. | |||
| No 3 (2018) | On Evaluating the State of Steel Specimens using Dynamic Spectrograms of Acoustic Signals | Abstract |
(Rus) |
| Gubin V.V., Anikeev N.A., Dyachenko D.I. | |||
| No 2 (2018) | Stability of orthotropic doubly curved shallow shells with a movable hinged fixing of the border | Abstract |
(Rus) |
| Kamenev I.V., Semenov A.A. | |||
| No 4 (2018) | Dynamic deformation interaction of elements of the “drummer-gasket-reinforced concrete beam” system | Abstract |
(Rus) |
| Sobyanin K.V., Shardakov I.N., Shestakov A.P., Glot I.O. | |||
| No 4 (2017) | ESTIMATION OF CRACK PROPAGATION DIRECTION ANGLE UNDER MIXED-MODE LOADING (MODE I AND MODE II): GENERALIZED FRACTURE MECHANICS CRITERIA AND ATOMISTIC MODELING (MOLECULAR DYNAMICS METHOD) | Abstract |
(Rus) |
| Stepanova L.V., Bronnikov S.A., Belova O.N. | |||
| No 4 (2017) | Models of molecular dynamics: a review of EAM potentials. Part 1: Potentials for single-component systems | Abstract |
(Rus) |
| Volegov P.S., Gerasimov R.M., Davlyatshin R.P. | |||
| No 2 (2017) | A shock loading on a bar with a central crack | Abstract |
(Rus) |
| Malik A.V., Ryazantseva I.E., Lavit I.M. | |||
| No 4 (2017) | Perturbation of the stress-strain state of an elastic half-space by the spherical inhomogeneity of elastic properties under shear in horizontal plane taking account of gravitational forces | Abstract |
(Rus) |
| Panteleev I.A., Poltavceva E.V., Mubassarova V.A., Gavrilov V.A. | |||
| No 1 (2017) | Indication of thermoelastic instability of sliding contact using embedded piezoceramic interlayer | Abstract |
(Rus) |
| Zelentsov V.B., Mitrin B.I., Sukiyazov A.G., Aizikovich S.M. | |||
| No 3 (2017) | ANSYS numerical modeling of electroelastic fields in the piezoelectro luminescent fiber-optical sensor diagnosing the composite volume deformed state | Abstract |
(Rus) |
| Pan’kov A.A., Pisarev P.V. | |||
| No 4 (2017) | CRITICAL DYNAMICS OF LOCALIZED INSTABILITIES OF PLASTIC FLOW IN THE AL-MG ALLOY | Abstract |
(Rus) |
| Efremov D.V., Oborin V.A., Uvarov S.V., Naimark O.B. | |||
| No 2 (2017) | Thermoelasticity of a plane regular truss With orthogonal structure | Abstract |
(Rus) |
| Rybakov L.S. | |||
| No 3 (2017) | The numerical model of dynamic mechanical behavior of brittle materials based on the concept of the kinetic theory of strength | Abstract |
(Rus) |
| Grigoriev A.S., Shilko E.V., Skripnyak V.A., Chernyavsky A.G., Psakhie S.G. | |||
| No 1 (2017) | Strength computational and experimental analysis of turbojet fan case under the impact of a torn blade | Abstract |
(Rus) |
| Kurteyev V.A., Burdyugov S.I., Inozemtsev A.A., Lomaev V.I., Mozerov B.G., Sokolovskiy M.I., Shatrov V.B. | |||
| No 2 (2017) | Comparative analysis of variants of plasticity theories under cyclic loading | Abstract |
(Rus) |
| Bondar V.S., Abashev D.R., Petrov V.K. | |||
| No 4 (2017) | Numerical solution for an inverse problem about determination of volumetric heat capacity of rock mass during artificial freezing | Abstract |
(Rus) |
| Zhelnin M.S., Plekhov O.A., Semin M.A., Levin L.Y. | |||
| No 2 (2017) | Modeling of the cross-section ovality of single crystal nickel-based superalloy samples under tension | Abstract |
(Rus) |
| Semenov A.S., Beliaev M.O., Grishchenko A.I. | |||
| No 4 (2017) | The Stress-Strain State and Failure of Structural Elements with Sharp Stress Concentrators under Bending | Abstract |
(Rus) |
| Sapozhnikov S.B., Ivanov M.A., Yaroslavtsev S.I., Shcherbakov I.A. | |||
| No 1 (2017) | Experimental studies of the high temperature influence on strength and deformation properties of combined glass organoplastics | Abstract |
(Rus) |
| Lobanov D.S., Babushkin A.V. | |||
| No 3 (2017) | Modeling of dynamic bending of a rigid-plastic reinforced layered curvilinear plate with a supported circular hole under explosive loads | Abstract |
(Rus) |
| Romanova T.P. | |||
| No 4 (2017) | Aramid fabric surface treatment and its impact on the mechanics of yarn’s frictional interaction | Abstract |
(Rus) |
| Ignatova A.V., Dolganina N.Y., Sapozhnikov S.B., Shabley A.A. | |||
| No 1 (2017) | Expansion of a cylindrical cavity in a compressible elastic-plastic medium | Abstract |
(Rus) |
| Aptukov V.N., Khasanov A.R. | |||
| No 4 (2017) | Modeling of the product termomechanical behavior during 3D deposition of wire materials in ANSYS | Abstract |
(Rus) |
| Smetannikov O.Y., Trushnikov D.N., Maksimov P.V., Bartolomey M.L., Kovyazin A.V. | |||
| No 1 (2017) | Numerical and experimental study of composite bulkhead partition strength with in-situ x-ray monitoring | Abstract |
(Rus) |
| Potrahov N.N., Anoshkin A.N., Zuiko V.Y., Osokin V.M., Pisarev P.V., Pelenev K.A. | |||
| No 2 (2017) | Modelling the generation of new material surfaces in a composite with an adhesion layer under cohesive destruction | Abstract |
(Rus) |
| Glagolev V.V., Markin A.A., Fursaev A.A. | |||
| No 4 (2017) | Modeling the dynamic penetration processes of dimensional bodies in a compressible elastoplastic medium | Abstract |
(Rus) |
| Linnik E.Y., Kotov V.L., Konstantinov A.Y. | |||
| 401 - 500 of 737 Items | << < 1 2 3 4 5 6 7 8 > >> | ||