| Issue |
Title |
| No 3 (2017) |
Finite-element model validation and its execution algorithm |
|
|
Zabelin A.V., Pyhalov A.A. |
| No 5 (2023) |
THE INFLUENCE OF THE STRUCTURAL ORGANIZATION OF CHIRAL METAMATERIALS ON THEIR PHYSICAL AND MECHANICAL CHARACTERISTICS |
|
|
Akhmetshin L.R., Smolin I.Y. |
| No 3 (2021) |
Finite Element Model Updating Method of Dynamic Systems |
|
|
Krasnorutskiy D.A., Lakiza P.A., Berns V.A., Zhukov E.P. |
| No 3 (2018) |
Construction of a Representative Model Based on Computed Tomography |
|
|
Kharin N.V., Vorobyev O.V., Berezhnoi D.V., Sachenkov O.A. |
| No 3 (2023) |
NATURAL VIBRATIONS AND HYDROELASTIC STABILITY OF A PLATE WITH A PIEZOELECTRIC ELEMENT CONNECTED TO AN EXTERNAL RL-CIRCUIT |
|
|
Lekomtsev S.V., Matveenko V.P., Senin A.N. |
| No 1 (2022) |
Finite element calculation of an elliptical cylinder in a geometrically nonlinear formulation using the vector form of the interpolation procedure |
|
|
Klochkov Y.V., Dzhabrailov A.S., Ishchanov T.R., Marchenko S.S., Andreev A.S., Klochkov M.Y. |
| No 3 (2019) |
Numerical Simulation of the Phase Transition Control in Torsion of a Hollow Cylinder Made of Heusler Alloy |
|
|
Rogovoy A.A., Stolbova O.S. |
| No 1 (2018) |
Numerical study of a thermomechanical behavior of a crystallizing polymer medium with regard to finite deformations |
|
|
Kulikov R.G., Kulikova T.G., Smetannikov O.Y. |
| No 4 (2016) |
DYNAMICS OF MULTILINK ROD SYSTEM WITH CONSTRAINTS: A PLANE PROBLEM IN FINITE ELEMENT FORMULATION |
|
|
Danilin A.N. |
| No 1 (2013) |
Combined discrete modeles in the three-dimensional elastic inhomogeneous bodies analysis of complex shape |
|
|
Matveev A.D. |
| No 2 (2017) |
A shock loading on a bar with a central crack |
|
|
Malik A.V., Ryazantseva I.E., Lavit I.M. |
| No 4 (2022) |
SECONDARY BUCKLING OF A HEATED CIRCULAR PLATE |
|
|
Levyakov S.V. |
| No 4 (2016) |
Experimental and numerical research of the dynamic response of composite outlet guide vane for aircraft jet engine |
|
|
Grinev M.A., Anoshkin A.N., Pisarev P.V., Shipunov G.S., Nikhamkin M.S., Balakirev A.A., Konev I.P., Golovkin A.Y. |
| No 3 (2021) |
Comparison of foam models from regular and irregular arrays of Gibson-Ashby open-cells |
|
|
Kornievsky A.S., Nasedkin A.V. |
| No 4 (2014) |
Coupled model of fluid-saturated porous materials based on a combination of discrete and continuum approaches |
|
|
Dimaki A.V., Shilko E.V., Astafurov S.V., Korostelev S.Y., Psakhie S.G. |
| No 1 (2018) |
Modelling the formation of new material surfaces during adhesive delamination of a composite |
|
|
Glagolev V.V., Markin A.A., Fursaev A.A. |
| No 4 (2015) |
Formation of divergent testing efforts and experimental evaluation of material strength under biaxial stretching |
|
|
Zenkov E.V., Tsvik L.B. |
| No 3 (2022) |
Numerical simulation of the nickel alloy microstructure formed in the process of hot fogging |
|
|
Rogovoy A.A., Salikhova N.K. |
| No 3 (2018) |
Computational simulation of the damage accumulation processes in cracked solids by the user procedure UMAT of Simulia Abaqus |
|
|
Stepanova L.V. |
| No 2 (2016) |
Manufacturing defects in composite flanges: modelling and analysis of influence on static strength |
|
|
Anoshkin A.N., Zuiko V.Y., Osokin V.M., Tretyakov A.A., Pisarev P.V. |
| No 1 (2018) |
A model of crystallization process taking into account phase changes in formation of a metallic material by laser fusion method |
|
|
Suhodoeva T.S., Kamenskikh A.A., Maksimov P.V. |
| No 3 (2023) |
NON-CONTACT DEFORMATION WITH REVERSIBLE SURFACE PLASTIC DEFORMATION |
|
|
Zaides S.A., Nguyen N.N. |
| No 3 (2019) |
The Modeling of the Edge Fatigue Crack Growth under High Frequency Loading |
|
|
Nikitin A.D., Nikitin I.S., Stratula B.A. |
| No 4 (2015) |
Natural vibrations of heated functionally graded cylindrical shells with fluid |
|
|
Bochkarev S.A., Lekomtsev S.V. |
| No 3 (2022) |
Low-cycle fatigue of V-notched cylindrical samples of bronze alloy |
|
|
Abashev D.R. |
| No 1 (2019) |
The Research of the Mechanical Behavior of Elastically Transformable Composite Structures |
|
|
Khaliulin V.I., Batrakov V.V., Shabalin L.P., Kiauka M.Y., Bezzametnov O.N. |
| No 1 (2017) |
Nonlinear and coupled thermal effects during finite element simulation of contact thermo-force surface hardening |
|
|
Bagmutov V.P., Denisevich D.S., Zakharov I.N., Ivannikov A.Y. |
| No 2 (2021) |
The Image-Based Finite Element Evaluation of the Deformed State |
|
|
Vorobiev O.V., Semenova E.V., Mukhin D.A., Statsenko E.O., Baltina T.V., Gerasimov O.V. |
| No 3 (2023) |
MODELING OF PRESTRESSED PLATES WITH MATERIAL INHOMOGENEITY, PERFORATIONS AND INCLUSIONS |
|
|
Bogachev I.V., Nedin R.D. |
| No 2 (2022) |
Modeling of the elastoplastic deformation process of single crystal superalloys |
|
|
Grishchenko A.I., Semenov A.S. |
| No 1 (2019) |
The Effect of Preliminary Plastic Hardening by Tension on the Cylindrical Shells Buckling during Torsion |
|
|
Bazhenov V.G., Zhegalov D.V., Kazakov D.A., Kibec A.I., Nagornykh E.V., Samsonova D.A. |
| No 3 (2024) |
THE STATE OF STRESS AND DESTRUCTION OF AN ADHESIVE WHEN JOINING PLATES WITH A LAP |
|
|
B.E., Glagolev V.V., Glagolev L.V., Markin A.A. |
| No 1 (2021) |
Experimental determination and finite element analysis of coefficients of the multi-parameter Williams series expansion in the vicinity of the crack tip in linear elastic materials. Part II |
|
|
Stepanova L.V. |
| No 1 (2015) |
NUMERICAL MODELLING OF PERFORATED SHELLS STABILITY |
|
|
Antipov A.A., Artemyeva A.A., Bazhenov V.G., Zhestkov M.N., Kibec A.I. |
| No 4 (2016) |
Finite element investigation of the effectiveness of the tubular piezoelectric vibratory gyroscope depending on the type of polarization and boundary conditions |
|
|
Nasedkin A.V., Shprayzer E.I. |
| No 1 (2022) |
The Simulation of the Nonlinear Consolidation of Porous Media |
|
|
Sheshenin S.V., Artamonova N.B. |
| No 1 (2014) |
The fatigue life-time propagation of the connection elements of long-term operated hydro turbines considering material degradation |
|
|
Larin O.O., Trubayev O.I., Vodka O.O. |
| No 1 (2017) |
Numerical and experimental study of composite bulkhead partition strength with in-situ x-ray monitoring |
|
|
Potrahov N.N., Anoshkin A.N., Zuiko V.Y., Osokin V.M., Pisarev P.V., Pelenev K.A. |
| No 3 (2024) |
ASYMPTOTIC BEHAVIOUR OF THE CRACK TIP FIELDS UNDER CREEP REGIME TAKING INTO ACCOUNT DAMAGE ACCUMULATION PROCESSES |
|
|
Chapliy D.V., Belova О.N., Stepanova L.V., Bykova Y.S. |
| No 4 (2020) |
Finite element method with account of singularity for mixed mode cracks |
|
|
Tartygasheva A.M., Shlyannikov V.N., Tumanov A.V. |
| No 4 (2015) |
Stress-strain analysis and strength prediction of composite outlet guide vane for aircraft jet engine |
|
|
Grinev M.A., Anoshkin A.N., Pisarev P.V., Zuiko V.Y., Shipunov G.S. |
| No 2 (2023) |
CALCULATION OF THE TOOL SHAPE FOR TUBE MIDDLE PART DISTRIBUTION BY RIGID MATRIX |
|
|
Bormotin K.S., Potianikhin D.A., Hlaing M.K., Sinelshchikov A.A. |
| No 2 (2019) |
Hydroelastic stability of coaxial cylindrical shells made of piezoelectric material |
|
|
Bochkarev S.A., Lekomtsev S.V. |
| No 3 (2016) |
Normal and shear stresses estimation in deformed metals based on infrared thermography data |
|
|
Terekhina A.I., Kostina A.A., Plekhov O.A. |
| No 1 (2022) |
Calculation of VAT and assessment of the strength of a segmented cylindrical shell made of composite materials with metal inserts |
|
|
Rogozhnikova E.N., Anoshkin A.N., Bulbovich R.V. |
| No 2 (2017) |
Modeling of the cross-section ovality of single crystal nickel-based superalloy samples under tension |
|
|
Semenov A.S., Beliaev M.O., Grishchenko A.I. |
| No 1 (2024) |
CALCULATION OF STATIC DEFORMATION OF AXISYMMETRIC SHELLS OF ROTATION WITH DIFFERENTIAL MODEL |
|
|
Nguyen C.M., Shelevaya D.R., Krasnorutskiy D.A. |
| No 2 (2020) |
Investigation of nonlinearity of longitudinal displacement function from mechanical and geometric characteristics of the plate |
|
|
Osadchy N.V., Malyshev V.A., Shepel V.T. |
| No 2 (2023) |
INFLUENCE OF SURFACE CHARGE ON THE FORMATION OF THE CARBONIZED LAYER RELIEF ON THE POLYMER SURFACE DURING ION-PLASMA TREATMENT |
|
|
Beliaev A.Y., Izyumov R.I., Svistkov A.L. |
| No 4 (2018) |
Deformation and Strength Properties Prediction of Metals with Uniformly Distributed Closed Pores under Single and Cyclic Loading |
|
|
Poroshin V.B., Shlishevsky A.V. |
| No 3 (2016) |
Finite element analysis of biaxial cyclic tensile loading of elasto-plastic plate with central elliptical hole |
|
|
Turkova V.A., Stepanova L.V. |
| No 1 (2024) |
ON IDENTIFICATION OF PARAMETERS OF A NONLINEAR CONSOLIDATION MODEL OF SANDY SOIL |
|
|
Artamonova N.B., Sheshenin S.V. |
| No 1 (2023) |
IDENTIFICATION OF DEFECTS IN A COATING WEDGE BASED ON ULTRASONIC NON-DESTRUCTIVE TESTING METHODS AND CONVOLUTIONAL NEURAL NETWORKS |
|
|
Soloviev A.N., Sobol B.V., Vasiliev P.V., Senichev A.V., Novikova A.I. |
| No 1 (2016) |
DETERMINATION OF MECHANICAL CHARACTERISTICS OF TRANSVERSELY ISOTROPIC FIBER COIL ACCORDING TO ISOTROPIC PROPERTIES OF ITS COMPONENTS |
|
|
Gasparyan A.G., Esipenko I.A. |
| No 1 (2014) |
Mathematical modelling of vegetable oil plunger extraction |
|
|
Anferov S.D., Skul’skiy O.I., Slavnov E.V. |
| No 1 (2020) |
Modeling a Dynamic Response at Resonant Vibrations of an Elongated Plate with an Integral Damping Coating |
|
|
Paimushin V.N., Firsov V.A., Shishkin V.M. |
| No 4 (2015) |
ITERATIVE FINITE ELEMENT ALGORITHM and its implementation for STRESS STATE of structural elements with singular points |
|
|
Pestrenin V.M., Pestrenina I.V., Landik L.V. |
| No 1 (2023) |
PROGRAMMABLE BEHAVIOR OF THE METAMATERIAL BY KINDS OF UNIT CELLS CONNECTION |
|
|
Akhmetshin L.R., Smolin I.Y. |
| No 4 (2018) |
Construction and analysis of finite-element models of inhomogeneous deformable solids based on scanning |
|
|
Pykhalov A.A., Duong V.L., Tolstikov V.G. |
| No 4 (2016) |
Theoretical-experimental method for determination of aerodynamic damping component of test samples with diamond-shaped cross-section |
|
|
Paimushin V.N., Firsov V.A., Gyunal I., Shishkin V.M. |
| No 4 (2021) |
Composite materials in aircraft engine blades |
|
|
Khayrnasov K.Z. |
| No 2 (2017) |
Modelling the generation of new material surfaces in a composite with an adhesion layer under cohesive destruction |
|
|
Glagolev V.V., Markin A.A., Fursaev A.A. |
| No 4 (2023) |
APPLICATION OF THE FINITE ELEMENT METHOD IN COMBINATION WITH THE CONTACT LAYER METHOD TO DETERMINE THE STRESS-STRAIN STATE OF MULTILAYER BEAMS |
|
|
Chepurnenko A.S., Turina V.S. |
| No 4 (2019) |
Numerical study of the influence of gaps between tiles and backing type on overall high-velocity impact performance of a ceramic-faced protective structure |
|
|
Kudryavtsev O.A., Sapozhnikov S.B., Zhikharev M.V. |
| No 3 (2015) |
CAD/CAE modelling of mechanical behavior of composite outlet guide vane for aircraft jet engine |
|
|
Grinev M.A., Anoshkin A.N., Pisarev P.V., Zuiko V.Y., Shipunov G.S. |
| No 1 (2023) |
SIMULATION OF ELASTOPLASTIC FRACTURE OF A CENTER CRACKED PLATE |
|
|
Astapov N.S., Kurguzov V.D. |
| No 4 (2018) |
Numerical simulation for development of methodology of stress-strain state control of composite bulkhead for aviation application with the usage of FBG sensors |
|
|
Anoshkin A.N., Zuiko V.Y., Pelenev K.A., Pisarev P.V., Shipunov G.S. |
| No 3 (2016) |
A numerical study of stress-strain state evolution in structurally inhomogeneous materials subjected to uniaxial loading |
|
|
Smirnov S.V., Konovalov A.V., Myasnikova M.V., Khalevitsky Y.V., Smirnov A.S. |
| No 3 (2021) |
The Numerical simulation of composite sandwich cylindrical shells reinforced with circular frames under local loadings |
|
|
Sukhomlinov L.G., Shivrin M.V. |
| No 2 (2013) |
Development of experimental equipment for hydrostatic compression of porous materials |
|
|
Berezin I.M. |
| No 4 (2017) |
STOCHASTICAL MODEL OF MICROSTRUCTURAL FAILURE BASED ON RESTORATION OF DISTRIBUTIONS LAWS FOR RANDOM STRESS AND STRAIN FIELDS IN MICROHETEROGENEOUS MEDIA |
|
|
Tashkinov M.A. |
| No 4 (2023) |
ANALYSIS OF THE STRESS-STRAIN STATE OF ALUMINUM ALLOY D16T UNDER A COMPLEX STRESS STATE ACCOUNTING FOR DAMAGE |
|
|
Kosov D.A., Fedorenkov D.I. |
| No 3 (2019) |
Simulation of residual stresses during pulsed thermo-force surface hardening |
|
|
Bagmutov V.P., Denisevich D.S., Zakharov I.N., Romanenko M.D., Fastov S.A. |
| No 4 (2015) |
Experimental investigation and numerical modeling of elastic properties and strength of porous ceramics |
|
|
Ignatova A.V., Kudryavtsev O.A., Sapozhnikov S.B. |
| No 4 (2022) |
MODELING OF CREEP PROCESSES OF SINGLE-CRYSTAL ALLOYS WITH TAKING INTO ACCOUNT OF RAFTING |
|
|
Grishchenko A.I., Semenov A.S. |
| No 3 (2018) |
Finite element study of mixed mode loading of the cracked semicircular disc under bending |
|
|
Stepanova L.V., Frolov K.V. |
| No 2 (2016) |
Separation process modeling of composite with adhesive layer |
|
|
Glagolev V.V., Markin A.A., Fursaev A.A. |
| No 3 (2014) |
COMPARISON OF THE RESULTS OF SOLVING THE PROBLEM OF FRACTURE MECHANICS FOR PIPE WITH NON-THROUGH CRACK |
|
|
Glushkov S.V., Skvortsov Y.V., Perov S.N. |
| No 3 (2019) |
Buckling Problem of Composite Thin-Walled Structures with Properties Dependent on Loading Types |
|
|
Fedorenko A.N., Fedulov B.N., Lomakin E.V. |
| No 3 (2015) |
Mathematical modeling of development of beyond design basis accident in integral fast-neuron reactors vessel |
|
|
Bazhenov V.G., Zhestkov M.N., Zamyatin V.A., Kibets A.I. |
| 1 - 80 of 80 Items |
|
