ARTICLES
Issue | Title | Abstract | File |
No 4 (2021) | Investigation of the stress-strain state of a hollow cylinder with a coating based on the gradient model of thermoelasticity | Abstract |
(Rus) |
Vatulyan A.O., Nesterov S.A., Yurov V.O. | |||
No 1 (2021) | Effectiveness of 2-D and 3-D modelling of dovetail joint of composite fan blade for choosing rational reinforcement schemes | Abstract |
(Rus) |
Guseinov K., Kudryavtsev O.A., Sapozhnikov S.B. | |||
No 3 (2021) | Elastic diffusion vibrations of an isotropic Kirchhoff-Love plate under an unsteady distributed transverse load | Abstract |
(Rus) |
Yu G., Zemskov A.V., Tarlakovskii D.V. | |||
No 2 (2021) | The Influence of the Friction-Sliding Coefficient of Support Structures and Parameters of Seismic Actions on Reactions and Reliability of Structures with Seismic Protection | Abstract |
(Rus) |
Abakarov A.D., Zainulabidova H.R. | |||
No 3 (2021) | Effect of plastic compressibility on the strain rate intensity factor in compression of a material layer between parallel plates | Abstract |
(Rus) |
Lyamina E.A., Novozhilova O.V. | |||
No 2 (2021) | Modeling the Mechanical Response of Auxetic Metamaterials to Dynamic Effects | Abstract |
(Rus) |
Skripnyak V.V., Chirkov M.O., Skripnyak V.A. | |||
No 4 (2021) | Investigation of the features of crystallization of granules of high-strength aluminum alloys of the Al-Zn-Mg-Cu system at ultra-high cooling rates | Abstract |
(Rus) |
Zharov M.V. | |||
No 1 (2021) | Analysis of the stability of the computational algorithm to a change in the geometric parameters of cylindrical shell structures | Abstract |
(Rus) |
Bakusov P.A., Semenov A.A. | |||
No 3 (2021) | The Applied mechanical and mathematical model of grinding of a solid particle by static crushing | Abstract |
(Rus) |
Guryanov G.A., Abdeev B.M., Baigereyev S.R., Kim V.A., Suleimenov A.D. | |||
No 1 (2020) | The Ultimate Load Estimation of Welded Joints of High-Strength Steels subject to Mechanical and Geometric Heterogeneity | Abstract |
(Rus) |
Sapozhnikov S.B., Ivanov M.A., Shcherbakov I.A. | |||
No 4 (2020) | Research of the asymmetric rolling of workpieces | Abstract |
(Rus) |
Ashkeyev Z.A., Andreyachshenko V.A., Bukanov Z.U. | |||
No 2 (2020) | Investigation of nonlinearity of longitudinal displacement function from mechanical and geometric characteristics of the plate | Abstract |
(Rus) |
Osadchy N.V., Malyshev V.A., Shepel V.T. | |||
No 4 (2020) | On modeling of airflow in human lungs: constitutive relations to describe deformation of porous medium | Abstract |
(Rus) |
Trusov P.V., Zaitseva N.V., Tsinker M.Y. | |||
No 3 (2020) | Structural failure criterion for spatially-reinforced carbon-carbon composite materials | Abstract |
(Rus) |
Magnitsky I.V. | |||
No 1 (2020) | Two methods for calculating the stress-strain state of shape memory alloy constructions taking into account tension-compression asymmetry | Abstract |
(Rus) |
Stolbova O.S., Tikhomirova K.A. | |||
No 4 (2020) | Investigation of the Winkler foundation model applicability for describing the contact interaction of elastoplastic shells with a core under external pressure | Abstract |
(Rus) |
Bazhenov V.G., Nagornykh E.V., Samsonova D.A. | |||
No 2 (2020) | The grain structure refinement of metals and alloys under severe plastic deformation: experimental data and analysis of mechanisms | Abstract |
(Rus) |
Ostanina T.V., Shveykin A.I., Trusov P.V. | |||
No 4 (2020) | Modeling of deformation and fracture of porous media taking into account their morphological composition | Abstract |
(Rus) |
Shalimov A.S., Tashkinov M.A. | |||
No 3 (2020) | Diagnostics of impregnation defects of reinforcing filaments of polymer composite with built-in fibre-optic sensor with distributed Bragg grating | Abstract |
(Rus) |
Pan’kov A.A. | |||
No 1 (2020) | A Dynamic expansion of a cylindrical cavity in a compressible elastic-plastic medium. The Analysis of medium resistance to dynamic penetration of a sharp-nosed impactor | Abstract |
(Rus) |
Khasanov A.R. | |||
No 4 (2020) | Analysis of the fracture toughness parameters at the free edge in layered composites | Abstract |
(Rus) |
Bondarchuk D.A., Fedulov B.N., Fedorenko A.N., Lomakin E.V. | |||
No 2 (2020) | The current state and tendencies of using rheological models for self-forming wooden structures | Abstract |
(Rus) |
Ponomarev V.S., Kashevarova G.G. | |||
No 4 (2020) | Study Smart-layer effect on the physical and mechanical characteristics of the samples from polymer composite materials under quasi-static loading | Abstract |
(Rus) |
Shipunov G.S., Baranov M.A., Nikiforov A.S., Golovin D.V., Tihonova A.A. | |||
No 3 (2020) | Asymptotic stress fields in the vicinity of the crack in perfectly plastic solids under mixed mode loading | Abstract |
(Rus) |
Stepanova L.V. | |||
No 1 (2020) | The Refined Model of Viscoelastic-Plastic Deformation of Reinforced Cylindrical Shells | Abstract |
(Rus) |
Yankovskii A.P. | |||
No 4 (2020) | The Tree-Level Viscoelastic Model: Analysis of the Influence of the Packing Defect Energy to the Response of Materials under Complex Loading | Abstract |
(Rus) |
Gribov D.S., Trusov P.V. | |||
No 2 (2020) | The method of reconstruction of residual stresses and plastic deformations in thin-walled pipelines in the delivery state and after bilateral vibro-shock surface hardening with a shot | Abstract |
(Rus) |
Radchenko V.P., Pavlov V.P., Berbasova T.I., Saushkin M.N. | |||
No 4 (2020) | Propagation of non-stationary antisymmetric kinematic perturbations from a spherical cavity in Cosserat medium | Abstract |
(Rus) |
Tarlakovskii D.V., Nguyen V.L. | |||
No 1 (2020) | On modeling bodies with delaminating coatings taking into account the fields of prestresses | Abstract |
(Rus) |
Bogachev I.V., Vatulyan A.O. | |||
No 3 (2020) | The effect of the angle of «meeting» of fullerite C60 with a solid substrate on the deposition process | Abstract |
(Rus) |
Suvorov S.V., Severiuchin A.V., Vakhrushev A.V. | |||
No 1 (2020) | The Refined Plane Mechanical and Mathematical Model Determining Stresses in the Base of the Strip Foundation and Elastic Sediment | Abstract |
(Rus) |
Abdeev B.M., Brim T.F., Muslimanova G. | |||
No 4 (2020) | Investigation of damage accumulation and delamination propagation in polymer composite materials based on two-level fracture models | Abstract |
(Rus) |
Dolgikh D.A., Tashkinov M.A. | |||
No 2 (2020) | The Dissipative Properties Assessment of the Oscillatory System of a Serial Sample of the Coriolis Flowmeter | Abstract |
(Rus) |
Romanov V.A., Taranenko P.A. | |||
No 4 (2020) | Structural elements based on the metamaterials | Abstract |
(Rus) |
Yurgenson S.A., Lomakin E.V., Fedulov B.N., Fedorenko A.N. | |||
No 1 (2020) | The Theoretical and experimental study of the bending of a thin substrate during electrolytic deposition | Abstract |
(Rus) |
Bout D.K., Bychkov P.S., Lychev S.A. | |||
No 3 (2020) | Fracture resistance parameters for the compressor disk imitation model | Abstract |
(Rus) |
Yakovlev M.M., Yarullin R.R., Shlyannikov V.N. | |||
No 2 (2020) | Investigation of the mechanical behavior of a two-phase Mg-Ni compound during fast compression | Abstract |
(Rus) |
Aptukov V.N., Skryabina N.E., Fruchart D. | |||
No 4 (2020) | Numerical simulation of deformation and fracture of metal-matrix composites with considering residual stresses | Abstract |
(Rus) |
Zemlianov A.V., Evtushenko E.P., Balokhonov R.R. | |||
No 2 (2020) | Nonlinear dynamics and stages of damage of Ti6Al4V and Ti45Nb titanium alloys in very high cycle fatigue | Abstract |
(Rus) |
Bannikov M.V., Oborin V.A., Bilalov D.A., Naimark O.B. | |||
No 4 (2020) | Finite element method with account of singularity for mixed mode cracks | Abstract |
(Rus) |
Tartygasheva A.M., Shlyannikov V.N., Tumanov A.V. | |||
No 1 (2020) | The Applied model of grinding a spherical solid particle with a direct impact on a non-deformable flat surface | Abstract |
(Rus) |
Guryanov G.A., Abdeev B.M. | |||
No 3 (2020) | Numerical algorithm for searching for layouts of electroelastic bodies with external electric circuits for obtaining the best damping properties | Abstract |
(Rus) |
Iurlova N.A., Oshmarin D.A., Sevodina N.V., Iurlov M.A. | |||
No 2 (2020) | Modeling the processes of atom structure formation of a superconducting spin valve | Abstract |
(Rus) |
Vakhrushev A.V., Fedotov A.Y., Savva Y.B., Sidorenko A.S. | |||
No 4 (2020) | On a modeling stress-controlled surface growth of solids | Abstract |
(Rus) |
Izmaylova Y.O., Freidin A.B. | |||
No 3 (2020) | Solving the problems of strength and destruction of materials and structural elements using a complex experimental-theoretical approach | Abstract |
(Rus) |
Bragov A.M., Konstantinov A.Y., Lomunov A.K., Basalin A.V. | |||
No 4 (2020) | Experimental determination and finite element analysis of coefficients of the multi-parameter Williams series expansion in the vicinity of the crack tip in linear elastic materials. Part I | Abstract |
(Rus) |
Stepanova L.V. | |||
No 1 (2020) | The Nonlinear evolutionary problem for self-stressed multilayered hyperelastic spherical bodies | Abstract |
(Rus) |
Lychev S.A., Lycheva T.N., Koifman K.G. | |||
No 3 (2020) | Limit states and safety factors under repeated loading | Abstract |
(Rus) |
Chernyavsky O.F., Chernyavsky A.O. | |||
No 2 (2020) | A variant of the thermoplasticity theory for monotonic and cyclic processes of nonisothermal loads | Abstract |
(Rus) |
Bondar V.S., Abashev D.R., Fomin D.Y. | |||
No 4 (2020) | Inelastic behavior and destruction of materials under isothermal and non-isothermal, simple and complex loads | Abstract |
(Rus) |
Bondar V.S., Abashev D.R. | |||
No 3 (2020) | About mixed forced, parametric and self-oscillations by limited excitation and delayed elasticity | Abstract |
(Rus) |
Alifov A.A. | |||
No 4 (2020) | The influence of surface effects in the problem of theory of elasticity for a circular hole in a half-plane | Abstract |
(Rus) |
Gandilyan D.V. | |||
No 1 (2020) | The limit state of concrete and reinforced concrete rods at complex and longitudinal-transverse bending | Abstract |
(Rus) |
Nemirovskii Y.V., Tikhonov S.V. | |||
No 3 (2020) | Models of hydrogen influence on the mechanical properties of metals and alloys | Abstract |
(Rus) |
Yakovlev Y.A., Polyanskiy V.A., Sedova Y.S., Belyaev A.K. | |||
No 2 (2020) | The Numerical study of the influence of a two-scale pore structure on the dynamic strength of water-saturated concrete | Abstract |
(Rus) |
Konovalenko I.S., Shilko E.V., Konovalenko I.S. | |||
No 4 (2020) | Damage development under very-high-cycle fatigue regime | Abstract |
(Rus) |
Nikitin I.S., Nikitin A.D., Stratula B.A. | |||
No 3 (2020) | Evolution of temperature stresses in the Gadolin problem of assembling a two-layer elastoplastic pipe | Abstract |
(Rus) |
Burenin A.A., Tkacheva A.V. | |||
No 4 (2020) | Dynamic characteristics of three-layer beams with load-bearing layers made of alumino-glass plastic | Abstract |
(Rus) |
Prokudin O.A., Solyaev Y.O., Babaytsev A.V., Artemyev A.V., Korobkov M.A. | |||
No 1 (2020) | Modeling a Dynamic Response at Resonant Vibrations of an Elongated Plate with an Integral Damping Coating | Abstract |
(Rus) |
Paimushin V.N., Firsov V.A., Shishkin V.M. | |||
No 4 (2020) | On stress-affected kinetics of intermetallic compound growth in the presence of electromigration | Abstract |
(Rus) |
Shtegman V.O., Morozov A.V., Freidin A.B., Müller W.H. | |||
No 2 (2020) | The effect of replacing non-analytic trajectories with break points on smooth paths to the complexity of deformation and loading processes of materials | Abstract |
(Rus) |
Zubchaninov V.G., Alekseev A.A., Gultiaev V.I. | |||
No 4 (2020) | Estimating of mechanical stresses, plastic deformations and damage by means of acoustic anisotropy | Abstract |
(Rus) |
Belyaev A.K., Polyanskiy V.A., Tretyakov D.A. | |||
No 3 (2020) | Modeling the deformation process of a plate with a stress concentrator taking into account the postcritical stage of material deformation | Abstract |
(Rus) |
Wildemann V.E., Tretyakov M.P., Mugaratov A.I. | |||
No 1 (2020) | The effect of surface plastic hardening technology, residual stresses and boundary conditions on the buckling of a beam | Abstract |
(Rus) |
Radchenko V.P., Afanaseva O.S., Glebov V.E. | |||
No 4 (2020) | Numerical analysis of the spherical bearing geometric configuration with antifriction layer made of different materials | Abstract |
(Rus) |
Adamov A.A., Kamenskih A.A., Pankova A.P. | |||
No 2 (2020) | Numerical Modeling of Electroelastic Fields in the Surface Piezoelectric Luminescent Optical Fiber Sensor to Diagnose Deformation of Composite Plates | Abstract |
(Rus) |
Pan’kov A.A., Pisarev P.V. | |||
No 4 (2020) | On the specifics of behavior of the sandwich plate composite facing layers under local loading | Abstract |
(Rus) |
Paimushin V.N., Kayumov R.A., Shakirzyanov F.R., Kholmogorov S.A. | |||
No 3 (2020) | About the nonlinear acoustic parameter during deformation of AMG61 alloy | Abstract |
(Rus) |
Ilyahinsky A.V., Rodyushkin V.M. | |||
No 4 (2019) | In memoriam | Abstract |
(Rus) |
Вестник ПНИПУ. М. | |||
No 3 (2019) | Buckling Problem of Composite Thin-Walled Structures with Properties Dependent on Loading Types | Abstract |
(Rus) |
Fedorenko A.N., Fedulov B.N., Lomakin E.V. | |||
No 2 (2019) | Plastic stress intensity factor in fracture mechanics | Abstract |
(Rus) |
Zakharov A.P., Shlyannikov V.N., Ishtyryakov I.S. | |||
No 4 (2019) | About a new approach to calculating spiral clamps | Abstract |
(Rus) |
Danilin A.N., Zhavoronok S.I., Rabinsky L.N. | |||
No 1 (2019) | A System Development for Monitoring Kinetic Parameters of a Phase Transition in a Fluid-Saturated Soil Based on Fiber Optic Sensors | Abstract |
(Rus) |
Prokhorov A.E., Plekhov O.A. | |||
No 3 (2019) | Simulation of Metal Powder Bidirectional Compression in a Pressing Tool with a Floating Die | Abstract |
(Rus) |
Berezin I.M., Zalazinskii A.G., Nesterenko A.V., Bykova T.M. | |||
No 4 (2019) | Elastoplastic interaction of grains in polycrystalline materials | Abstract |
(Rus) |
Tashkinov A.A., Shavshukov V.E. | |||
No 3 (2019) | Simulation of residual stresses during pulsed thermo-force surface hardening | Abstract |
(Rus) |
Bagmutov V.P., Denisevich D.S., Zakharov I.N., Romanenko M.D., Fastov S.A. | |||
No 1 (2019) | The Effect of Preliminary Plastic Hardening by Tension on the Cylindrical Shells Buckling during Torsion | Abstract |
(Rus) |
Bazhenov V.G., Zhegalov D.V., Kazakov D.A., Kibec A.I., Nagornykh E.V., Samsonova D.A. | |||
No 2 (2019) | Mixed Form Equations for Ribbed Shells of a General Type And Their Solutions | Abstract |
(Rus) |
Karpov V.V. | |||
No 4 (2019) | Creation and verification of computational models for analysis of the mechanical behaviour of jet engines composite components under high-velocity impact: main problems and basic recommendations | Abstract |
(Rus) |
Kudryavtsev O.A., Zhikharev M.V., Olivenko N.A. | |||
No 1 (2019) | Mathematical modeling of the stress-strain state in surface hardened thin-walled tubes with regard to the residual shear stresses | Abstract |
(Rus) |
Radchenko V.P., Pavlov V.P., Saushkin M.N. | |||
No 3 (2019) | The Analysis of residual stresses in layered composites with [0°/90°] layup | Abstract |
(Rus) |
Bondarchuk D.A., Fedulov B.N., Fedorenko A.N., Lomakin E.V. | |||
No 4 (2019) | Non-stationary coupled axisymmetric thermoelasticity problem for a rigidly fixed round plate | Abstract |
(Rus) |
Shlyakhin D.A., Dauletmuratova Z.M. | |||
No 3 (2019) | A Review of some non-traditional applications of the engineering theory of high-speed penetration | Abstract |
(Rus) |
Dubinsky A.V. | |||
No 1 (2019) | On Predicting Material and Structural Resources under Cyclic Loading | Abstract |
(Rus) |
Bondar V.S., Abashev D.R., Petrov V.K. | |||
No 2 (2019) | Analysis of Dynamic Characteristics of a Contact Interaction of Solids Using Computational Software | Abstract |
(Rus) |
Maksimenko A.A., Koteneva N.V., Perfilieva N.V., Borisova A.D. | |||
No 4 (2019) | Numerical study of the influence of gaps between tiles and backing type on overall high-velocity impact performance of a ceramic-faced protective structure | Abstract |
(Rus) |
Kudryavtsev O.A., Sapozhnikov S.B., Zhikharev M.V. | |||
No 1 (2019) | The Influence of Stress Concentrators on the Magnesium Alloy Mechanical Behavior under Deformation at High Strain Rates in the Temperature Range from 295 to 673 K | Abstract |
(Rus) |
Skripnyak V.A., Skripnyak V.V., Kozulin A.A., Iohim K.V. | |||
No 3 (2019) | The Assessment of Fatigue Durability and Critical Plane Determination for Multiaxial Cyclic Loading at an Arbitrary Shift of Phases | Abstract |
(Rus) |
Burago N.G., Nikitin I.S., Nikitin A.D., Stratula B.A. | |||
No 3 (2019) | The Structure of Interfacial Regions in Polymer Nanocomposites | Abstract |
(Rus) |
Dyshin O.A., Habibov I.A., Shamilov V.M., Rustamova K.B. | |||
No 1 (2019) | Experimental study of postcritical deformation and failure of steels at high temperature | Abstract |
(Rus) |
Wildemann V.E., Tretyakov M.P. | |||
No 2 (2019) | Dynamics of a Viscoelastic Plate Carrying Concentrated Mass with Account of Physical Nonlinearity of Material. Part 1. Mathematical Model, Solution Method and Computational Algorithm | Abstract |
(Rus) |
Mirsaidov M.M., Abdikarimov R.A., Khodzhaev D.A. | |||
No 4 (2019) | Analysis of models for porosity evolution in reservoir during steam injection | Abstract |
(Rus) |
Kostina A.A., Zhelnin M.S., Plekhov O.A. | |||
No 1 (2019) | Evaluation of the Damage Degree to Carbon-Fiber Composite Materials under Impact | Abstract |
(Rus) |
Staroverov O.A., Babushkin A.V., Gorbunov S.M. | |||
No 3 (2019) | Inverse coefficient problems in mechanics | Abstract |
(Rus) |
Vatulyan A.O., Plotnikov D.K. | |||
No 2 (2019) | Description of the Effect of AlMg6 Alloy Strength Decrease during Temperature Increase under Dynamic Loading | Abstract |
(Rus) |
Bilalov D.A., Sokovikov M.A., Bayandin Y.V., Chudinov V.V., Oborin V.A., Naimark O.B. | |||
No 3 (2019) | The Phenomenological Model of Hyper Viscoelasticity of Elastomers with a Constant Orientation of the Main Stress Axes in the Accompanying Frame of Reference | Abstract |
(Rus) |
Korneyev V.S., Korneyev S.A. | |||
No 1 (2019) | Application of the Acoustic Emission Technique to Studying the Damage Accumulation in a Functional Ceramic Coating | Abstract |
(Rus) |
Zubova E.M., Lobanov D.S., Strungar E.M., Wildemann V.E., Lyamin Y.B. | |||
No 2 (2019) | Deformation model of a five-layer panel with a hard filler | Abstract |
(Rus) |
Osadchy N.V., Malyshev V.A., Shepel V.T. | |||
No 4 (2019) | Numerical modeling of nonlinear dynamic and static compression of the metal mesh | Abstract |
(Rus) |
Kochetkov A.V., Modin I.A., Leontev N.V., Turigina I.A., Poverennov E.Y. | |||
No 1 (2019) | Comprehensive analysis of mechanical behavior and fracture processes of specimens of three-dimensional reinforced carbon fiber in tensile tests | Abstract |
(Rus) |
Tretyakova T.V., Dushko A.N., Strungar E.M., Zubova E.M., Lobanov D.S. | |||
201 - 300 of 659 Items | << < 1 2 3 4 5 6 7 > >> |