| Issue |
Title |
| Vol 20, No 2 (2018) |
Designing CAD-models for calculating thermal stresses |
|
|
Trapeznikov N.V., Shumkov A.A., Matygullina E.V., Ablyaz T.R. |
| Vol 21, No 4 (2019) |
INFLUENCE OF HEATING TEMPERATURE AND HOLDING TIME ON THE GRAIN SIZE IN MEDIUM-CARBON STRUCTURAL STEELS 29H2G2S2MF AND 44H2G2S2MF |
|
|
Iurchenko A.N., Grebenkin R.D., Menlysheva N.S., Simonov I.N. |
| Vol 17, No 3 (2015) |
DEVELOPMENT OF THE CONSTRUCTION MULTILAYER FILM Ti-Al-N WITH STABILITY AND HIGH FUNCTIONAL PROPERTIES |
|
|
Soshina T.O. |
| Vol 22, No 1 (2020) |
Damping capacity, coercive force and structure of Fe-Cr-Al alloys depending on the temperature of thermomagnetic treatment |
|
|
Melchakov M.A., Scvortsov A.I. |
| Vol 18, No 4 (2016) |
MULTICOMPONENT CONCENTRATION-INHOMOGENEOUS ALLOYS OF Fe-Cr-Co-Si-B WITH HIGH DENSITY |
|
|
Kozvonin V.A., Shatsov A.A., Ryaposov I.V. |
| Vol 17, No 1 (2015) |
THE MECHANISM OF PHASE-SEPARATION PHENOMENA IN SYNTHETIC MINERAL ALLOY |
|
|
Ignatova A.M. |
| Vol 22, No 2 (2020) |
The use of a metal insert in the core to control the solidification speed of the casting |
|
|
Sharov K.V., Bogomyagkov A.V., Pustovalov D.O., Shumkov A.A., Merkusheva L.M., Nikitin N.E. |
| Vol 18, No 2 (2016) |
Physic-mechanical characteristics researching of nitride and carbon coverings on the basis of AlSiCr and AlSiTi |
|
|
Gusev V.G., Kochetov D.O. |
| Vol 16, No 2 (2014) |
INTERACTION OF PHASES IN THE PHASE-SEPARATION PHASES PETRURGICAL MATERIAL DURING THE CRYSTALLIZATION PROCESS |
|
|
Ignatova A.M. |
| Vol 19, No 2 (2017) |
SYSTEM INTEGRATED APPROACH TO MANAGING QUALITY PRODUCT ON THE BASIS OF MONITORING INTELLECTUALIZATION IN A SINGLE INFORMATION SPACE |
|
|
Samoilova E.M. |
| Vol 23, No 4 (2021) |
INFLUENCE OF EQUAL-CHANNEL ANGULAR PRESSING ON THE STRUCTURAL-PHASE STATE OF TECHNICALLY PURE NICKEL |
|
|
Popova N.A., Nikonenko E.L., Solov’eva Y.V., Starenchenko V.A. |
| Vol 17, No 2 (2015) |
The dependence of the densification process during sintering with the use of nanosized metal powders (scientific review) |
|
|
Antsiferova I.V. |
| Vol 20, No 4 (2018) |
INFLUENCE OF nanodispersed poWders OF CARBON TO THE STRUCTURE AND PROPERTIES OF POWDER STEEL by SPS |
|
|
Oglezneva S.A., Kulikova A.A., Grevnov L.M., Ogleznev N.D. |
| Vol 18, No 2 (2016) |
The methods of influence on the structure and properties of aluminum alloys used in the aerospace industry |
|
|
Dolgopolov V.G., Dubrovskii V.A., Simonov M.I., Simonov I.N., Iurchenko A.N., Shibanova K.A. |
| Vol 21, No 4 (2019) |
FORMATION ADDITIVE METAL PIECE BY MEANS OF SUBMERGED ARC WELDING |
|
|
Trekin G.E., Shevchenko O.I. |
| Vol 16, No 3 (2014) |
FORMATION OF STRUCTURE OF THE MATERIAL IN THE PROCESS OF gel-casting OF NANOPOWDER TITANIA |
|
|
Mischinov B.P., Porozova S.E. |
| Vol 19, No 3 (2017) |
TO THE PROBLEM OF CORROSION DESTRUCTION OF WELDED JOINTS |
|
|
Krivonosova E.A., Akulova S.N., Myshkina A.V. |
| Vol 23, No 4 (2021) |
FORMATION OF GRADIENT STRUCTURE IN VT1-0 ALLOY UNDER THE INFLUENCE OF IMPLANTATION |
|
|
Nikonenko A.V., Popova N.A., Nikonenko E.L., Kalashnikov M.P., Kurzina I.A. |
| Vol 20, No 4 (2018) |
APPLICATION OF THE SHS PROCESS FOR FABRICATION OF CERAMIC-METAL COMPOSITE POWDERS ON THE BASIS OF TITANIUM CARBIDE AND IRON |
|
|
Amosov A.P., Samboruk A.R., Yatsenko I.V., Yatsenko V.V. |
| Vol 18, No 2 (2016) |
CREATING COMPOSITE MATERIALS BASED ON HIGH-NICKEL ALLOYS WITH THE USE OF A PLASMA ARC AT CURRENT REVERSE POLARITY |
|
|
Shchitsyn I.D., Belinin D.S., Neulybin S.D., Terent’ev S.A., Efimova A.A. |
| Vol 21, No 4 (2019) |
STRUCTURAL-PHASE STATE OF UFG TITANIUM IMPLANTED WITH ALUMINUM IONS |
|
|
Nikonenko A.V., Popova N.A., Nikonenko E.L., Kalashnikov M.P., Oks E.M., Kurzina I.A. |
| Vol 16, No 4 (2014) |
FORMATION OF MICROSTRUCTURE AND PROPERTIES OF THE COMPOSITION "HARDFACING LAYER-BASE METAL" IN THE ULTRASONIC WAVE |
|
|
Shevchenko O.I., Trekin G.E. |
| Vol 19, No 4 (2017) |
THE STUDY OF TRANSFORMATIONS, STRUCTURE AND PROPERTIES OF INDUSTRIAL SMELTING SYSTEM-ALLOYED LOW-CARBON STEEL 12Kh3G2МFS |
|
|
Poduzov D.P., Simonov M.Y., Yurchenko A.N., Simonov Y.N., Bukhalov A.D. |
| Vol 24, No 1 (2022) |
DESIGNING A MULTI-LAYER TiAlN-TiN-TiAlN COATING WITH HIGH TRIBOLOGICAL PROPERTIES |
|
|
Soshina T.O., Plysnina V.A., Soshina O.I. |
| Vol 17, No 4 (2015) |
SOME FEATURES OF POLITERMS VISCOSITY INDUSTRIAL MELTS: ANOMALY, HYSTERESIS, THE CRITICAL TEMPERATURE |
|
|
Tsepelev V.S., Davydov I.S., Latypova A.I., Taushkanova A.I., Likhtenshtein V.I. |
| Vol 21, No 1 (2019) |
INFLUENCE OF MAGNETIC PROCESSING ON THE DURABILITY OF THE WORKING PARTS OF SPRING-COILING MACHINES |
|
|
Zelinskiy V.V., Gots A.N., Gusev V.G., Borisova E.A. |
| Vol 18, No 3 (2016) |
Special features of the fracture surface of structural steel 09G2S after cold radial forging |
|
|
Shaimanov G.S., Simonov M.Y., Simonov Y.N., Pertsev A.S. |
| Vol 22, No 1 (2020) |
The choice of unit cell for modeling the structure of the ceramic foam filter |
|
|
Bezdenezhnykh I.S., Matygullina E.V., Shumkov A.A. |
| Vol 16, No 4 (2014) |
INVESTIGATION OF STRUCTURE AND PROPERTIES OF CARBURIZED LAYERS IN LOW-CARBON CARBURIZING STEELS |
|
|
Ivanov A.S., Bogdanova M.V. |
| Vol 20, No 1 (2018) |
EXPERIMENTAL DETERMINATION OF SURFACE TENSIONS AND KINEMATIC VISCOSITY OF MELTS OF STEEL TUBES IN CONDITIONS OF JSC "VYKSUNSK METALLURGICAL PLANT" |
|
|
Somov S.A., Tsepelev V.S., Konashkov V.V., Vyukhin V.V., Taushkanova A.I. |
| Vol 18, No 1 (2016) |
THE EFFECTS OF NONMETALLIC INCLUSIONS ON THE DEVELOPMENT OF DEFORMATION OF THE deposited layers |
|
|
Krivonosova E.A. |
| Vol 21, No 1 (2019) |
THE RESULTS OF THE STUDY OF THE INFLUENCE OF HARDNESS AND MICROSTRUCTURE OF THE LOCOMOTIVE BRAKE PADS FOR EXTREME BRAKING OF THE LOCOMOTIVE |
|
|
Klimov A.A., Struchkov A.V. |
| Vol 14, No 3 (2012) |
THE FORMATION OF CAPSULE РYROCARВON COATING ON THE SUPPORTING BACKING FROM THE CARBON – BASE COMPOSITE MATERIАL |
|
|
Sinani I.L., Bushuyev V.M. |
| Vol 18, No 3 (2016) |
Structure and properties of Ni47Mn42In11 alloy AFTER THERMOCYCLIC TREATMENT |
|
|
Kaletina Y.V., Efimova E.D., Gerasimov E.G., Kaletin A.Y., Fokina E.A. |
| Vol 16, No 4 (2014) |
Effect of the frictional treatment on the structure and wear resistance of the surface layer of tItanium bt1-0, subject to nitriding |
|
|
Korshunov L.G., Chernenko N.L. |
| Vol 20, No 2 (2018) |
Improving the quality of the surfaces of products obtained by electrical discharge machining using electrolytic-plasma polishing technology |
|
|
Ablyaz T.R., Muratov K.R., Kochergin E.U., Shakirzanov T.V. |
| Vol 18, No 1 (2016) |
The effect of distortion of RP-models in the process of building and layering post-processing of the synthesized material |
|
|
Shumkov A.A., Abliaz T.R., Matygullina E.V., Kilina P.N. |
| Vol 21, No 1 (2019) |
Features of structure formation of heat-resistant weld metal based on Ni3Al |
|
|
Zorin I.V., Sokolov G.N., Lysak V.I., Dubcov U.N., Denisevich D.S., Fastov S.A. |
| Vol 14, No 3 (2012) |
INTERRELATION OF COMPOSITION, STRUCTURE AND CHEMICAL PROPERTIES OF REFRACTORY INTERSTITUAL PHASES. PART I. REGULARITIES OF REACTIONS OF REFRACTORY INTERSTITIAL PHASES WITH SOLID REAGENTS |
|
|
Zhilyaev V.A. |
| Vol 22, No 1 (2020) |
Development of recommendations to improve the melting of the melchior alloy mark MN19 |
|
|
Kochetkova Y.A., Tsepelev V.S., Vyukhin V.V., Konashkov V.V., Povodator A.M. |
| Vol 20, No 2 (2018) |
Influence of the thermal mode at joint arc and aluminothermic impact on formation of structure and properties of built-up metal |
|
|
Abashkin E.E., Zhilin S.G., Komarov O.N., Tkacheva A.V. |
| Vol 18, No 1 (2016) |
Investigation of the structure and properties of materials Cu-Ti3SiC2 of tool-electrode for electrical discharge machining |
|
|
Oglezneva S.A., Gilev V.G., Ogleznev N.D. |
| Vol 21, No 1 (2019) |
Development of technology and flux-cored wire for arc welding of high-strength alloy steels |
|
|
Shalimov M.P., Berezovsky A.V., Smolentsev A.S. |
| Vol 14, No 4 (2012) |
STRUCTURE OF THE SURFACE LAYER OF WORKPIECE IN THE PROCESSING OF WIRE-EDM |
|
|
Ablyaz T.R. |
| Vol 18, No 4 (2016) |
COMPARATIVE ANALYSIS OF CORROSION- AND WEAR RESISTANT PRODUCTS FROM COMPOSITE METAL STEEL-COPPER MADE BY PLASMA SURFACING AT CURRENTS DIRECT AND REVERSE POLARITY |
|
|
Schitsyn Y.D., Belinin D.S., Neulybin S.D., Terentyev S.A. |
| Vol 22, No 1 (2020) |
Effect of spark plasma sintering temperature on “inconel 625” alloy structure |
|
|
Oglezneva S.A., Kachenyuk M.N., Smetkin A.A., Kulmetieva V.B. |
| Vol 17, No 1 (2015) |
INITIAL STAGE OF NUCLEATING CENTRE FORMATION BY PULSE METHASTRUCTURE MODIFYING OF THE METALS SURFACE |
|
|
Postnikov V.S. |
| Vol 18, No 1 (2016) |
Structure and phase composition of Ti-Nb alloy produced by the method of selective laser melting |
|
|
Kovalevskaia Z.G., Khimich M.A., Sharkeev I.P., Babakova E.V. |
| Vol 21, No 2 (2019) |
Influence of temperature and time of thermal processing on the structure of enamel coating |
|
|
Soshina T.O., Mukhamadyarova V.R. |
| Vol 14, No 4 (2012) |
Explosive fabrication of metalloceramics protective containers |
|
|
Yakovlev I.V., Ogolikhin V.M., Shemelin S.D. |
| Vol 18, No 4 (2016) |
Analysis of transformation of subsurface layers structure of steels and their influences on process of hardening with AMD-methods |
|
|
Kustov A.I., Miguel I.A. |
| Vol 17, No 1 (2015) |
FORMATION OF ULTRAFINE-GRAINED STRUCTURE IN CARBON STEEL IN THE HOT PLASTIC DEFORMATION PROCESSES |
|
|
Nikitenko O.A., Efimova I.I., Zherebtsov M.S., Koptseva N.V., Barishnikov M.P., Selivanova E.S. |
| Vol 20, No 2 (2018) |
REDUCTION OF THE DEFECTS OF HEAT-RESISTANT NICKELS ALLOYS IN SURFACING TECHNOLOGIES |
|
|
Krivonosova E.A., Shchitsyn I.D., Akulova S.N., Myshkina A.V., Neulybin S.D., Belinin D.S. |
| Vol 18, No 2 (2016) |
INVESTIGATION OF THE EFFECT OF GRAIN SIZE AUSTENITE ON PHASE TRANSFORMATION TEMPERATURE IRON-BASED ALLOYS |
|
|
Oglezneva S.A., Saenkov K.L. |
| Vol 21, No 2 (2019) |
Selection of the main criteria of the thermal cycle for the predicting methods of the structure of welds at electron-beam welding |
|
|
Olshanskaya T.V., Fedoseeva E.M. |
| Vol 15, No 1 (2013) |
FRACTAL APPROACH TO THE MULTILEVEL STRUCTURE STABILITY ANALYSIS |
|
|
Krivonosova E.K., Pervadchuk V.P. |
| Vol 18, No 4 (2016) |
Hypotheses justifies the increase in the durability of DIAMOND-abrasive tool |
|
|
Dudarev A.S., Zakharova S.P. |
| Vol 22, No 3 (2020) |
Features of creating combined heat-resistant multicomponent coatings for higt-temperature |
|
|
Guzanov B.N., Pugacheva N.B., Alekseev V.D., Slukin E.Y. |
| Vol 17, No 1 (2015) |
Investigation of influence of structural on the stress-strain state in the process of pressure treatment |
|
|
Baryshnikov M.P., Chukin M.V., Boiko A.B. |
| Vol 20, No 2 (2018) |
INFLUENCE OF THE DEFORMATION ON STRUCTURE AND PROPERTIES OF HEUSLER ALLOY Ni47Mn42In11 |
|
|
Kaletina Y.V., Greshnova E.D., Kaletin A.Y., Pilyugin V.P. |
| Vol 18, No 2 (2016) |
WEAR RESISTANCE OF ARC SPRAYED COATINGS TYPE OF Fe-C-Cr-Ti-Al AFTER PLASMA REMELTING |
|
|
Verkhorubov V.S., Nevezhin S.V., Korobov I.S., Neulybin S.D., Terent’ev S.A., Shchitsyn I.D. |
| Vol 21, No 3 (2019) |
DETERMINATION OF CRITICAL TEMPERATURES AC1 AND AC3 IN STEELS ALLOYING SYSTEM H2G2S2MF USING THE DILATOMETRIC METHOD AND THE METHOD OF TESTING QUENCHING |
|
|
Iurchenko A.N., Marieva M.A., Grebenkin R.D., Simonov I.N. |
| Vol 16, No 1 (2014) |
INFLUENCE of nonmetallicS and structural constituents on impact strength of LOW-ALLOYED steel |
|
|
Krivonosova E.A., Olshanskaya T.V., Lodyagina T.V., Burtseva O.A. |
| Vol 19, No 1 (2017) |
Calculation of characteristics of metal materials with AMD-methods |
|
|
Kustov A.I., Miguel I.A. |
| Vol 23, No 3 (2021) |
INTENSIVE PLASTIC DEFORMATION of NON-STOCHIOMETRIC Ni-Mn-In HEUSLER ALLOY |
|
|
Kaletina Y.V., Kaletin A.Y., Pilyugin V.P. |
| Vol 17, No 2 (2015) |
VARIATIONAL TECHNIQUES OF SURFACE PREPARATION FOR THE SUBSEQUENT FORMING BIOCOMPATIBLE TITANIUM-CARBON MATERIALS |
|
|
Nikulin S.M., Smetkin A.A., Astashina N.B. |
| Vol 20, No 3 (2018) |
Identification of potassium fluorophylate of the tested batch for compliance with the standard |
|
|
Yudin M.V., Ignatova A.M., Ignatov M.N. |
| Vol 18, No 2 (2016) |
MECHANICAL AND STRUCTURAL MICROINHOMOGENEITY OF WELDED COMPOUNDS OF X65 STEEL |
|
|
Fedoseeva E.M. |
| Vol 21, No 3 (2019) |
THE INFLUENCE OF LASER TREATMENT OF POWDER STEEL PA-ZHGR ON THE GEOMETRIC PARAMETERS OF THE LASER EXPOSURE ZONE |
|
|
Usynin E.V., Oglezneva S.A., Morozov E.A. |
| Vol 16, No 1 (2014) |
RESEARCH OF INTERPHASE INTERACTION IN THE COMPOSITE MATERIAL “UGLEKON - TITANIUM” |
|
|
Strukov N.N., Smetkin A.A., Astashina N.B. |
| Vol 19, No 1 (2017) |
Transformation of non-metallic inclusions in steels by the action of the plasma heat source |
|
|
Krivonosova E.A., Belinin D.S., Krivonosova E.K. |
| Vol 23, No 3 (2021) |
Influence of the intermediate layer forming method on the structure and properties of steel-aluminium system layered compositions |
|
|
Mikheev R.S., Kalashnikov I.E., Kobeleva L.I. |
| Vol 17, No 2 (2015) |
Features of sintering using nanosized carbide powders (scientific review) |
|
|
Antsiferov V.N., Antsiferova I.V. |
| Vol 20, No 3 (2018) |
THE CAUSES OF PATHOLOGICAL WEAR OF THE BANDAGE IN THE BANDAGE OF THE WHEEL OF LOKOMOTIVA-TORMOZNAYA KOLODKA SYSTEM AND THE POSSIBILITY OF HIS EXCEPTION |
|
|
Klimov A.A., Struchkov A.V., Bondarik V.B. |
| 1 - 74 of 74 Items |
|
