| Issue |
Title |
| No 5 (2023) |
THE INFLUENCE OF THE STRUCTURAL ORGANIZATION OF CHIRAL METAMATERIALS ON THEIR PHYSICAL AND MECHANICAL CHARACTERISTICS |
|
|
Akhmetshin L.R., Smolin I.Y. |
| No 4 (2022) |
ELECTROMAGNETIC COUPLING OF PIEZOELECTRIC/FERRITE COMPOSITE WITH INITIAL STRESS STATE |
|
|
Pan’kov A.A. |
| No 1 (2024) |
VARIATIONAL-DIFFERENCE SOLUTION OF DEFORMATION AND BUCKLING PROBLEMS OF ELASTOPLASTIC SHELLS OF REVOLUTION WITH ELASTIC FILLER UNDER COMBINED QUASI-STATIC AND DYNAMIC AXISYMMETRIC LOADINGS |
|
|
Bazhenov V.G., Kalinina Y.A., Nagornykh E.V., Samsonova D.A. |
| No 5 (2023) |
CRYSTAL PLASTICITY FINITE-ELEMENT SIMULATIONS FOR QUASISTATIC DEFORMATION OF POLYCRYSTALS IN TERMS OF EXPLICIT DYNAMICS |
|
|
Romanova V.A., Balokhonov R..., Borodina A., Shakhidzhanov V.S., Lychagin D.V., Emelianova E.S., Pisarev M. |
| No 4 (2018) |
Dynamic deformation interaction of elements of the “drummer-gasket-reinforced concrete beam” system |
|
|
Sobyanin K.V., Shardakov I.N., Shestakov A.P., Glot I.O. |
| No 3 (2022) |
Effect of mechanical load on resultant composite piezomodules |
|
|
Pan’kov A.A. |
| No 4 (2016) |
The influence of fluid filtration on the strength of porous fluid-saturated brittle materials |
|
|
Dimaki A.V., Shilko E.V., Astafurov S.V., Psakhie S.G. |
| No 3 (2020) |
Diagnostics of impregnation defects of reinforcing filaments of polymer composite with built-in fibre-optic sensor with distributed Bragg grating |
|
|
Pan’kov A.A. |
| No 4 (2023) |
EXPERIMENTAL AND THEORETICAL INVESTIGATIONS OF STRUCTURAL MECHANISMS AND PLASTIC STRAIN LOCALIZATION EFFECTS IN ALMG6 ALLOY UNDER DYNAMIC LOADING |
|
|
Sokovikov M.A., Simonov M.Y., Chudinov V.V., Uvarov S.V., Oborin V.A., Naimark O.B. |
| No 4 (2018) |
The Experimental and Theoretical Study of Large Deformations of Cylindrical Samples from Steel 09G2S with Stress Concentrators under Tension-Torsion Loading to Failure |
|
|
Bazhenov V.G., Kazakov D.A., Nagornykh E.V., Osetrov D.L., Ryabov A.A. |
| No 2 (2022) |
Analysis of the limiting states of cylindrical elastic-plastic shells under tension and combined loading by internal pressure and tension |
|
|
Bazhenov V.G., Kazakov D.A., Osetrov S.L., Osetrov D.L., Ryabov A.A. |
| No 2 (2016) |
Manufacturing defects in composite flanges: modelling and analysis of influence on static strength |
|
|
Anoshkin A.N., Zuiko V.Y., Osokin V.M., Tretyakov A.A., Pisarev P.V. |
| No 2 (2020) |
Numerical Modeling of Electroelastic Fields in the Surface Piezoelectric Luminescent Optical Fiber Sensor to Diagnose Deformation of Composite Plates |
|
|
Pan’kov A.A., Pisarev P.V. |
| No 4 (2023) |
BUILT-IN FIBER-OPTIC MECHANOPHOTOLUMINESCENT SENSOR OF COMPLEX DEFORMED STATE FOR MONITORING VIBRATIONS OF POLYMER COMPOSITE STRUCTURES |
|
|
Pan’kov A.A. |
| No 4 (2018) |
The methodical Aspects of Strength, Deformation and Energy characteristic Determination of Salt Rocks under Direct Tensile Loading of Rock Specimens in Laboratory Conditions |
|
|
Asanov V.A., Pankov I.L., Kuzminyh V.S., Morozov I.A. |
| No 1 (2022) |
Mathematical model of oxide film deformation on the surface of a metallic melt in an alternating magnetic field |
|
|
Nikulin I.L., Demin V.A. |
| No 3 (2016) |
Computational and experimental research of the contact debonding process when rigid reinforcement is pressed into concrete |
|
|
Kashevarova G.G., Martirosyan A.S., Travush V.I. |
| No 2 (2020) |
Investigation of the mechanical behavior of a two-phase Mg-Ni compound during fast compression |
|
|
Aptukov V.N., Skryabina N.E., Fruchart D. |
| No 4 (2023) |
ESTIMATING PARAMETERS OF PERMISSIBLE DEFECTS IN STRUCTURAL FIBERGLASS BASED ON THEORY OF CRITICAL DISTANCES |
|
|
Mullahmetov M.N., Lobanov D.S., Melnikova V.A., Yankin A.S. |
| No 1 (2019) |
The Effect of Preliminary Plastic Hardening by Tension on the Cylindrical Shells Buckling during Torsion |
|
|
Bazhenov V.G., Zhegalov D.V., Kazakov D.A., Kibec A.I., Nagornykh E.V., Samsonova D.A. |
| No 4 (2021) |
© ПНИПУ Numerical and experimental research of the evaluation of the mechanical behavior of carbon fiber reinforced polymerspecimens with an embedded Smart-layer |
|
|
Baranov M.A., Nikiforov A.S., Mikryukov A.O., Ermakov D.A. |
| No 3 (2017) |
ANSYS numerical modeling of electroelastic fields in the piezoelectro luminescent fiber-optical sensor diagnosing the composite volume deformed state |
|
|
Pan’kov A.A., Pisarev P.V. |
| No 4 (2019) |
Numerical modeling of nonlinear dynamic and static compression of the metal mesh |
|
|
Kochetkov A.V., Modin I.A., Leontev N.V., Turigina I.A., Poverennov E.Y. |
| No 4 (2023) |
ANALYSIS OF METHODS FOR CONSTRUCTING TRUE DEFORMATION DIAGRAMS OF ELASTOPLASTIC MATERIALS UNDER LARGE DEFORMATIONS |
|
|
Bazhenov V.G., Kazakov D.A., Kukanov S.S., Osetrov D.L., Ryabov A.A. |
| No 1 (2013) |
Very-high-cycle fatigue facture of titanium compressor disks |
|
|
Burago N.G., Zhuravlev A.B., Nikitin I.S. |
| No 4 (2021) |
Anti-icing indicator polymer coating with built-in fiber-optic PEL-sensor for indication, location and de-icing of aerodynamic surfaces |
|
|
Pan’kov A.A., Pisarev P.V. |
| No 3 (2017) |
Processing fine magnesium materials. Numerical simulation and experimental analyses |
|
|
Aptukov V.N., Romanov P.V., Skryabina N.E., Fruchart D. |
| No 2 (2024) |
MODELING THE DEFORMATION PROCESS OF AN UNDERWATER GAS PIPELINE UNDER THE EXPLOSIVE LOADING |
|
|
Abuzyarov М.H., Glazova E.G., Kochetkov A.V., Kochetkov M.A. |
| No 4 (2019) |
Analysis of models for porosity evolution in reservoir during steam injection |
|
|
Kostina A.A., Zhelnin M.S., Plekhov O.A. |
| No 2 (2023) |
INFLUENCE OF SURFACE CHARGE ON THE FORMATION OF THE CARBONIZED LAYER RELIEF ON THE POLYMER SURFACE DURING ION-PLASMA TREATMENT |
|
|
Beliaev A.Y., Izyumov R.I., Svistkov A.L. |
| No 3 (2021) |
Frequency characteristics of built-in fiber-optic PEL-sensor to diagnose complex harmonic deformations within the polymer composite structure |
|
|
Pan’kov A.A., Pisarev P.V. |
| No 4 (2017) |
Numerical solution for an inverse problem about determination of volumetric heat capacity of rock mass during artificial freezing |
|
|
Zhelnin M.S., Plekhov O.A., Semin M.A., Levin L.Y. |
| No 2 (2024) |
COMPUTATIONAL-EXPERIMENTAL METHOD FOR STRESS-STRAIN CURVE CONSTRUCTING UNDER CONDITIONS OF INHOMOGENEOUS STRESS FIELDS |
|
|
Wildemann V.E., Mugatarov A.I., Khmelev A.A. |
| No 1 (2023) |
PROGRAMMABLE BEHAVIOR OF THE METAMATERIAL BY KINDS OF UNIT CELLS CONNECTION |
|
|
Akhmetshin L.R., Smolin I.Y. |
| No 2 (2014) |
Seasonal changes in eigenfrequencies of structures supported on pile foundations |
|
|
Korepanov V.V., Tsvetkov R.V. |
| No 2 (2021) |
Modeling the Mechanical Response of Auxetic Metamaterials to Dynamic Effects |
|
|
Skripnyak V.V., Chirkov M.O., Skripnyak V.A. |
| No 3 (2019) |
Stability of chemical reaction fronts in the vicinity of a blocking state |
|
|
Morozov A.V., Freidin A.B., Müller W.H. |
| No 2 (2014) |
Mathematical modelling of stratified flow of polymer melts in an axisymmetric formulation |
|
|
Bachurina M.V., Kazakov A.V., Trufanova N.M. |
| No 1 (2018) |
Mathematical model of pulse scanning of pressure along a piezo-electro-luminescent fiber-optical sensor |
|
|
Pan’kov A.A. |
| No 3 (2019) |
Simulation of Metal Powder Bidirectional Compression in a Pressing Tool with a Floating Die |
|
|
Berezin I.M., Zalazinskii A.G., Nesterenko A.V., Bykova T.M. |
| No 4 (2022) |
A NUMERICAL ANALYSIS OF FORCED STEADY-STATE VIBRATIONS OF AN ELECTRO-VISCOELASTIC SYSTEM IN CASE OF A JOINT IMPACT OF ELECTRICAL AND MECHANICAL LOADS |
|
|
Iurlova N.А., Oshmarin D.A., Sevodina N.V. |
| No 4 (2014) |
Coupled model of fluid-saturated porous materials based on a combination of discrete and continuum approaches |
|
|
Dimaki A.V., Shilko E.V., Astafurov S.V., Korostelev S.Y., Psakhie S.G. |
| No 4 (2020) |
Numerical simulation of deformation and fracture of metal-matrix composites with considering residual stresses |
|
|
Zemlianov A.V., Evtushenko E.P., Balokhonov R.R. |
| No 2 (2018) |
Resonant diagnostics of temperature distribution by the piezo-electro-luminescent fiber-optical sensor according to the solution of the Fredholm integral equation |
|
|
Pan’kov A.A. |
| No 6 (2023) |
NUMERICAL SIMULATION OF THE INTERACTION BETWEEN A WAVE IN HYDROGEN AND A BARRIER IN A MODEL CHANNEL |
|
|
Seregina M.A., Babushkina A.V., Modorskii V.Y., Cherepanov I.E., Mikryukov A.O. |
| No 2 (2019) |
Description of the Effect of AlMg6 Alloy Strength Decrease during Temperature Increase under Dynamic Loading |
|
|
Bilalov D.A., Sokovikov M.A., Bayandin Y.V., Chudinov V.V., Oborin V.A., Naimark O.B. |
| No 4 (2022) |
INFLUENCE OF GEOMETRIC, KINEMATIC, GAS-DYNAMIC PARAMETERS ON ROTOR DYNAMIC STATE TAKING INTO ACCOUNT GAS DYNAMIC FLOW IN LABYRINTH SEALS CLEARANCES |
|
|
Modorskii V.Y., Cherepanov I.E., Babushkina A.V. |
| No 1 (2015) |
Deformation processes of elastoplastic material with defects under electrodynamic loading |
|
|
Kukudzhanov K.V., Levitin A.L. |
| No 4 (2020) |
Investigation of the Winkler foundation model applicability for describing the contact interaction of elastoplastic shells with a core under external pressure |
|
|
Bazhenov V.G., Nagornykh E.V., Samsonova D.A. |
| No 4 (2018) |
Determination of elastic and dissipative properties of concrete under dynamic deformation |
|
|
Shardakov I.N., Shestakov A.P., Glot I.O. |
| No 3 (2022) |
Formulation and Numerical Solution of the Stability Loss Problem of Elastic-Plastic Shells of Revolution with an Elastic Filler under Combined Axisymmetric and Torsional Loadings |
|
|
Bazhenov V.G., Kazakov D.A., Kibec A.I., Nagornykh E.V., Samsonova D.A. |
| No 4 (2015) |
Modeling the treatment of high-energy pulsed electromagnetic field of the micro-cracks in a polycrystalline metal |
|
|
Kukudzhanov K.V. |
| No 3 (2020) |
Numerical algorithm for searching for layouts of electroelastic bodies with external electric circuits for obtaining the best damping properties |
|
|
Iurlova N.A., Oshmarin D.A., Sevodina N.V., Iurlov M.A. |
| 1 - 53 of 53 Items |
|
