ARTICLES
| Issue | Title | Abstract | File |
| No 4 (2021) | Investigation of the features of crystallization of granules of high-strength aluminum alloys of the Al-Zn-Mg-Cu system at ultra-high cooling rates | Abstract |
 (Rus) |
| Zharov M.V. | |||
| No 1 (2021) | Analysis of the stability of the computational algorithm to a change in the geometric parameters of cylindrical shell structures | Abstract |
(Rus) |
| Bakusov P.A., Semenov A.A. | |||
| No 3 (2021) | The Applied mechanical and mathematical model of grinding of a solid particle by static crushing | Abstract |
(Rus) |
| Guryanov G.A., Abdeev B.M., Baigereyev S.R., Kim V.A., Suleimenov A.D. | |||
| No 2 (2021) | Numerical Algorithms for Simulation of a Fluid-Filed Fracture Evolution in a Poroelastic Medium | Abstract |
(Rus) |
| Borisov V.E., Ivanov A.V., Kritsky B.V., Savenkov E.B. | |||
| No 3 (2021) | Algorithm for topology optimization of a structure made of anisotropic material with consideration of the reinforcement orientation parameters | Abstract |
(Rus) |
| Fedulov B.N., Fedorenko A.N., Antonov F.K., Lomakin E.V. | |||
| No 2 (2021) | Extreme Clusters of Grains in Random Microstructures of Polycrystals | Abstract |
(Rus) |
| Tashkinov A.A., Shavshukov V.E. | |||
| No 4 (2021) | Multilevel model of polycrystals: application to assessing the effect of texture and grains misorientation on the critical deformation of the dynamic recrystallization initiation | Abstract |
(Rus) |
| Kondratev N.S., Trusov P.V., Podsedertsev A.N. | |||
| No 1 (2021) | Studying Deformation Behaviors in Austenitic Stainless Steels within a Temperature Range of 143 K < T < 420 K | Abstract |
(Rus) |
| Barannikova S.A., Nikonova A.M., Kolosov S.V. | |||
| No 3 (2021) | Comparison of foam models from regular and irregular arrays of Gibson-Ashby open-cells | Abstract |
(Rus) |
| Kornievsky A.S., Nasedkin A.V. | |||
| No 2 (2021) | Healing of Internal Defects in a Compressive Stress Field Using the Plastic Properties of Materials | Abstract |
(Rus) |
| Bukhalov V.I., Perelmuter M.N., Popov A.L. | |||
| No 3 (2021) | Simulation of the hot isostatic pressing process | Abstract |
(Rus) |
| Khlybov A.A., Belyaev E.S., Ryabtsev A.D., Ryabov D.A., Belyaeva S.S., Getmanovsky Y.A., Yavtushenko P.M. | |||
| No 2 (2021) | Modeling the Effective Conductive Properties of Polymer Nanocomposites with a Random Arrangement of Graphene Oxide Particles | Abstract |
(Rus) |
| Tashkinov M.A., Dobrydneva A.D., Matveenko V.P., Silberschmidt V.V. | |||
| No 4 (2021) | The potential of using SWCNTs, MWCNTs and CNFs capable of increasing the composite material dimensional and technological stability as modifiers of a polymer matrix | Abstract |
(Rus) |
| Obvertkin I.V., Pasechnik K.A., Vlasov A.Y. | |||
| No 1 (2021) | Compensatory bellows oscillations as a corrugated shell with liquid inside | Abstract |
(Rus) |
| Zinovieva T.V., Piskunov V.A. | |||
| No 3 (2021) | Finite Element Model Updating Method of Dynamic Systems | Abstract |
(Rus) |
| Krasnorutskiy D.A., Lakiza P.A., Berns V.A., Zhukov E.P. | |||
| No 2 (2021) | The Image-Based Finite Element Evaluation of the Deformed State | Abstract |
(Rus) |
| Vorobiev O.V., Semenova E.V., Mukhin D.A., Statsenko E.O., Baltina T.V., Gerasimov O.V. | |||
| No 3 (2021) | Crack growth in rotor P2M steel at elevated temperature | Abstract |
(Rus) |
| Shlyannikov V.N., Kosov D.A., Fedorenkov D.I., Zhang X.C., Tu S.T. | |||
| No 2 (2021) | The nonstationary thermoelectric elasticity problem for a long piezoceramic cylinder | Abstract |
(Rus) |
| Shlyakhin D.A., Kalmova M.A. | |||
| No 4 (2021) | Anti-icing indicator polymer coating with built-in fiber-optic PEL-sensor for indication, location and de-icing of aerodynamic surfaces | Abstract |
(Rus) |
| Pan’kov A.A., Pisarev P.V. | |||
| No 3 (2020) | Asymptotic stress fields in the vicinity of the crack in perfectly plastic solids under mixed mode loading | Abstract |
(Rus) |
| Stepanova L.V. | |||
| No 1 (2020) | The Refined Model of Viscoelastic-Plastic Deformation of Reinforced Cylindrical Shells | Abstract |
(Rus) |
| Yankovskii A.P. | |||
| No 4 (2020) | The Tree-Level Viscoelastic Model: Analysis of the Influence of the Packing Defect Energy to the Response of Materials under Complex Loading | Abstract |
(Rus) |
| Gribov D.S., Trusov P.V. | |||
| No 2 (2020) | The method of reconstruction of residual stresses and plastic deformations in thin-walled pipelines in the delivery state and after bilateral vibro-shock surface hardening with a shot | Abstract |
(Rus) |
| Radchenko V.P., Pavlov V.P., Berbasova T.I., Saushkin M.N. | |||
| No 4 (2020) | Propagation of non-stationary antisymmetric kinematic perturbations from a spherical cavity in Cosserat medium | Abstract |
(Rus) |
| Tarlakovskii D.V., Nguyen V.L. | |||
| No 1 (2020) | On modeling bodies with delaminating coatings taking into account the fields of prestresses | Abstract |
(Rus) |
| Bogachev I.V., Vatulyan A.O. | |||
| No 3 (2020) | The effect of the angle of «meeting» of fullerite C60 with a solid substrate on the deposition process | Abstract |
(Rus) |
| Suvorov S.V., Severiuchin A.V., Vakhrushev A.V. | |||
| No 1 (2020) | The Refined Plane Mechanical and Mathematical Model Determining Stresses in the Base of the Strip Foundation and Elastic Sediment | Abstract |
(Rus) |
| Abdeev B.M., Brim T.F., Muslimanova G. | |||
| No 4 (2020) | Investigation of damage accumulation and delamination propagation in polymer composite materials based on two-level fracture models | Abstract |
(Rus) |
| Dolgikh D.A., Tashkinov M.A. | |||
| No 2 (2020) | The Dissipative Properties Assessment of the Oscillatory System of a Serial Sample of the Coriolis Flowmeter | Abstract |
(Rus) |
| Romanov V.A., Taranenko P.A. | |||
| No 4 (2020) | Structural elements based on the metamaterials | Abstract |
(Rus) |
| Yurgenson S.A., Lomakin E.V., Fedulov B.N., Fedorenko A.N. | |||
| No 1 (2020) | The Theoretical and experimental study of the bending of a thin substrate during electrolytic deposition | Abstract |
(Rus) |
| Bout D.K., Bychkov P.S., Lychev S.A. | |||
| No 3 (2020) | Fracture resistance parameters for the compressor disk imitation model | Abstract |
(Rus) |
| Yakovlev M.M., Yarullin R.R., Shlyannikov V.N. | |||
| No 2 (2020) | Investigation of the mechanical behavior of a two-phase Mg-Ni compound during fast compression | Abstract |
(Rus) |
| Aptukov V.N., Skryabina N.E., Fruchart D. | |||
| No 4 (2020) | Numerical simulation of deformation and fracture of metal-matrix composites with considering residual stresses | Abstract |
(Rus) |
| Zemlianov A.V., Evtushenko E.P., Balokhonov R.R. | |||
| No 2 (2020) | Nonlinear dynamics and stages of damage of Ti6Al4V and Ti45Nb titanium alloys in very high cycle fatigue | Abstract |
(Rus) |
| Bannikov M.V., Oborin V.A., Bilalov D.A., Naimark O.B. | |||
| No 4 (2020) | Finite element method with account of singularity for mixed mode cracks | Abstract |
(Rus) |
| Tartygasheva A.M., Shlyannikov V.N., Tumanov A.V. | |||
| No 1 (2020) | The Applied model of grinding a spherical solid particle with a direct impact on a non-deformable flat surface | Abstract |
(Rus) |
| Guryanov G.A., Abdeev B.M. | |||
| No 3 (2020) | Numerical algorithm for searching for layouts of electroelastic bodies with external electric circuits for obtaining the best damping properties | Abstract |
(Rus) |
| Iurlova N.A., Oshmarin D.A., Sevodina N.V., Iurlov M.A. | |||
| No 2 (2020) | Modeling the processes of atom structure formation of a superconducting spin valve | Abstract |
(Rus) |
| Vakhrushev A.V., Fedotov A.Y., Savva Y.B., Sidorenko A.S. | |||
| No 4 (2020) | On a modeling stress-controlled surface growth of solids | Abstract |
(Rus) |
| Izmaylova Y.O., Freidin A.B. | |||
| No 3 (2020) | Solving the problems of strength and destruction of materials and structural elements using a complex experimental-theoretical approach | Abstract |
(Rus) |
| Bragov A.M., Konstantinov A.Y., Lomunov A.K., Basalin A.V. | |||
| No 4 (2020) | Experimental determination and finite element analysis of coefficients of the multi-parameter Williams series expansion in the vicinity of the crack tip in linear elastic materials. Part I | Abstract |
(Rus) |
| Stepanova L.V. | |||
| No 1 (2020) | The Nonlinear evolutionary problem for self-stressed multilayered hyperelastic spherical bodies | Abstract |
(Rus) |
| Lychev S.A., Lycheva T.N., Koifman K.G. | |||
| No 3 (2020) | Limit states and safety factors under repeated loading | Abstract |
(Rus) |
| Chernyavsky O.F., Chernyavsky A.O. | |||
| No 2 (2020) | A variant of the thermoplasticity theory for monotonic and cyclic processes of nonisothermal loads | Abstract |
(Rus) |
| Bondar V.S., Abashev D.R., Fomin D.Y. | |||
| No 4 (2020) | Inelastic behavior and destruction of materials under isothermal and non-isothermal, simple and complex loads | Abstract |
(Rus) |
| Bondar V.S., Abashev D.R. | |||
| No 3 (2020) | About mixed forced, parametric and self-oscillations by limited excitation and delayed elasticity | Abstract |
(Rus) |
| Alifov A.A. | |||
| No 4 (2020) | The influence of surface effects in the problem of theory of elasticity for a circular hole in a half-plane | Abstract |
(Rus) |
| Gandilyan D.V. | |||
| No 1 (2020) | The limit state of concrete and reinforced concrete rods at complex and longitudinal-transverse bending | Abstract |
(Rus) |
| Nemirovskii Y.V., Tikhonov S.V. | |||
| No 3 (2020) | Models of hydrogen influence on the mechanical properties of metals and alloys | Abstract |
(Rus) |
| Yakovlev Y.A., Polyanskiy V.A., Sedova Y.S., Belyaev A.K. | |||
| No 2 (2020) | The Numerical study of the influence of a two-scale pore structure on the dynamic strength of water-saturated concrete | Abstract |
(Rus) |
| Konovalenko I.S., Shilko E.V., Konovalenko I.S. | |||
| No 4 (2020) | Damage development under very-high-cycle fatigue regime | Abstract |
(Rus) |
| Nikitin I.S., Nikitin A.D., Stratula B.A. | |||
| No 3 (2020) | Evolution of temperature stresses in the Gadolin problem of assembling a two-layer elastoplastic pipe | Abstract |
(Rus) |
| Burenin A.A., Tkacheva A.V. | |||
| No 4 (2020) | Dynamic characteristics of three-layer beams with load-bearing layers made of alumino-glass plastic | Abstract |
(Rus) |
| Prokudin O.A., Solyaev Y.O., Babaytsev A.V., Artemyev A.V., Korobkov M.A. | |||
| No 1 (2020) | Modeling a Dynamic Response at Resonant Vibrations of an Elongated Plate with an Integral Damping Coating | Abstract |
(Rus) |
| Paimushin V.N., Firsov V.A., Shishkin V.M. | |||
| No 4 (2020) | On stress-affected kinetics of intermetallic compound growth in the presence of electromigration | Abstract |
(Rus) |
| Shtegman V.O., Morozov A.V., Freidin A.B., Müller W.H. | |||
| No 2 (2020) | The effect of replacing non-analytic trajectories with break points on smooth paths to the complexity of deformation and loading processes of materials | Abstract |
(Rus) |
| Zubchaninov V.G., Alekseev A.A., Gultiaev V.I. | |||
| No 4 (2020) | Estimating of mechanical stresses, plastic deformations and damage by means of acoustic anisotropy | Abstract |
(Rus) |
| Belyaev A.K., Polyanskiy V.A., Tretyakov D.A. | |||
| No 3 (2020) | Modeling the deformation process of a plate with a stress concentrator taking into account the postcritical stage of material deformation | Abstract |
(Rus) |
| Wildemann V.E., Tretyakov M.P., Mugaratov A.I. | |||
| No 1 (2020) | The effect of surface plastic hardening technology, residual stresses and boundary conditions on the buckling of a beam | Abstract |
(Rus) |
| Radchenko V.P., Afanaseva O.S., Glebov V.E. | |||
| No 4 (2020) | Numerical analysis of the spherical bearing geometric configuration with antifriction layer made of different materials | Abstract |
(Rus) |
| Adamov A.A., Kamenskih A.A., Pankova A.P. | |||
| No 2 (2020) | Numerical Modeling of Electroelastic Fields in the Surface Piezoelectric Luminescent Optical Fiber Sensor to Diagnose Deformation of Composite Plates | Abstract |
(Rus) |
| Pan’kov A.A., Pisarev P.V. | |||
| No 4 (2020) | On the specifics of behavior of the sandwich plate composite facing layers under local loading | Abstract |
(Rus) |
| Paimushin V.N., Kayumov R.A., Shakirzyanov F.R., Kholmogorov S.A. | |||
| No 3 (2020) | About the nonlinear acoustic parameter during deformation of AMG61 alloy | Abstract |
(Rus) |
| Ilyahinsky A.V., Rodyushkin V.M. | |||
| No 1 (2020) | The Ultimate Load Estimation of Welded Joints of High-Strength Steels subject to Mechanical and Geometric Heterogeneity | Abstract |
(Rus) |
| Sapozhnikov S.B., Ivanov M.A., Shcherbakov I.A. | |||
| No 4 (2020) | Research of the asymmetric rolling of workpieces | Abstract |
(Rus) |
| Ashkeyev Z.A., Andreyachshenko V.A., Bukanov Z.U. | |||
| No 2 (2020) | Investigation of nonlinearity of longitudinal displacement function from mechanical and geometric characteristics of the plate | Abstract |
(Rus) |
| Osadchy N.V., Malyshev V.A., Shepel V.T. | |||
| No 4 (2020) | On modeling of airflow in human lungs: constitutive relations to describe deformation of porous medium | Abstract |
(Rus) |
| Trusov P.V., Zaitseva N.V., Tsinker M.Y. | |||
| No 3 (2020) | Structural failure criterion for spatially-reinforced carbon-carbon composite materials | Abstract |
(Rus) |
| Magnitsky I.V. | |||
| No 1 (2020) | Two methods for calculating the stress-strain state of shape memory alloy constructions taking into account tension-compression asymmetry | Abstract |
(Rus) |
| Stolbova O.S., Tikhomirova K.A. | |||
| No 4 (2020) | Investigation of the Winkler foundation model applicability for describing the contact interaction of elastoplastic shells with a core under external pressure | Abstract |
(Rus) |
| Bazhenov V.G., Nagornykh E.V., Samsonova D.A. | |||
| No 2 (2020) | The grain structure refinement of metals and alloys under severe plastic deformation: experimental data and analysis of mechanisms | Abstract |
(Rus) |
| Ostanina T.V., Shveykin A.I., Trusov P.V. | |||
| No 4 (2020) | Modeling of deformation and fracture of porous media taking into account their morphological composition | Abstract |
(Rus) |
| Shalimov A.S., Tashkinov M.A. | |||
| No 3 (2020) | Diagnostics of impregnation defects of reinforcing filaments of polymer composite with built-in fibre-optic sensor with distributed Bragg grating | Abstract |
(Rus) |
| Pan’kov A.A. | |||
| No 1 (2020) | A Dynamic expansion of a cylindrical cavity in a compressible elastic-plastic medium. The Analysis of medium resistance to dynamic penetration of a sharp-nosed impactor | Abstract |
(Rus) |
| Khasanov A.R. | |||
| No 4 (2020) | Analysis of the fracture toughness parameters at the free edge in layered composites | Abstract |
(Rus) |
| Bondarchuk D.A., Fedulov B.N., Fedorenko A.N., Lomakin E.V. | |||
| No 2 (2020) | The current state and tendencies of using rheological models for self-forming wooden structures | Abstract |
(Rus) |
| Ponomarev V.S., Kashevarova G.G. | |||
| No 4 (2020) | Study Smart-layer effect on the physical and mechanical characteristics of the samples from polymer composite materials under quasi-static loading | Abstract |
(Rus) |
| Shipunov G.S., Baranov M.A., Nikiforov A.S., Golovin D.V., Tihonova A.A. | |||
| No 4 (2019) | In memoriam | Abstract |
(Rus) |
| Вестник ПНИПУ. М. | |||
| No 1 (2019) | The Influence of Stress Concentrators on the Magnesium Alloy Mechanical Behavior under Deformation at High Strain Rates in the Temperature Range from 295 to 673 K | Abstract |
(Rus) |
| Skripnyak V.A., Skripnyak V.V., Kozulin A.A., Iohim K.V. | |||
| No 3 (2019) | The Assessment of Fatigue Durability and Critical Plane Determination for Multiaxial Cyclic Loading at an Arbitrary Shift of Phases | Abstract |
(Rus) |
| Burago N.G., Nikitin I.S., Nikitin A.D., Stratula B.A. | |||
| No 3 (2019) | The Structure of Interfacial Regions in Polymer Nanocomposites | Abstract |
(Rus) |
| Dyshin O.A., Habibov I.A., Shamilov V.M., Rustamova K.B. | |||
| No 1 (2019) | Experimental study of postcritical deformation and failure of steels at high temperature | Abstract |
(Rus) |
| Wildemann V.E., Tretyakov M.P. | |||
| No 2 (2019) | Dynamics of a Viscoelastic Plate Carrying Concentrated Mass with Account of Physical Nonlinearity of Material. Part 1. Mathematical Model, Solution Method and Computational Algorithm | Abstract |
(Rus) |
| Mirsaidov M.M., Abdikarimov R.A., Khodzhaev D.A. | |||
| No 4 (2019) | Analysis of models for porosity evolution in reservoir during steam injection | Abstract |
(Rus) |
| Kostina A.A., Zhelnin M.S., Plekhov O.A. | |||
| No 1 (2019) | Evaluation of the Damage Degree to Carbon-Fiber Composite Materials under Impact | Abstract |
(Rus) |
| Staroverov O.A., Babushkin A.V., Gorbunov S.M. | |||
| No 3 (2019) | Inverse coefficient problems in mechanics | Abstract |
(Rus) |
| Vatulyan A.O., Plotnikov D.K. | |||
| No 2 (2019) | Description of the Effect of AlMg6 Alloy Strength Decrease during Temperature Increase under Dynamic Loading | Abstract |
(Rus) |
| Bilalov D.A., Sokovikov M.A., Bayandin Y.V., Chudinov V.V., Oborin V.A., Naimark O.B. | |||
| No 3 (2019) | The Phenomenological Model of Hyper Viscoelasticity of Elastomers with a Constant Orientation of the Main Stress Axes in the Accompanying Frame of Reference | Abstract |
(Rus) |
| Korneyev V.S., Korneyev S.A. | |||
| No 1 (2019) | Application of the Acoustic Emission Technique to Studying the Damage Accumulation in a Functional Ceramic Coating | Abstract |
(Rus) |
| Zubova E.M., Lobanov D.S., Strungar E.M., Wildemann V.E., Lyamin Y.B. | |||
| No 2 (2019) | Deformation model of a five-layer panel with a hard filler | Abstract |
(Rus) |
| Osadchy N.V., Malyshev V.A., Shepel V.T. | |||
| No 4 (2019) | Numerical modeling of nonlinear dynamic and static compression of the metal mesh | Abstract |
(Rus) |
| Kochetkov A.V., Modin I.A., Leontev N.V., Turigina I.A., Poverennov E.Y. | |||
| No 1 (2019) | Comprehensive analysis of mechanical behavior and fracture processes of specimens of three-dimensional reinforced carbon fiber in tensile tests | Abstract |
(Rus) |
| Tretyakova T.V., Dushko A.N., Strungar E.M., Zubova E.M., Lobanov D.S. | |||
| No 3 (2019) | Construction of Multigrid Finite Elements to Calculate Shells, Plates and Beams Based on Generating Finite Elements | Abstract |
(Rus) |
| Matveev A.D. | |||
| No 2 (2019) | The Investigation of the Initial Stress-Strain State Influence on Mechanical Properties of Viscoelastic Bodies | Abstract |
(Rus) |
| Bogachev I.V., Vatulyan A.O., Dudarev V.V., Nedin R.D. | |||
| No 3 (2019) | The Stressed state of the double-layer rectangular plate under shift. The Simplified two-dimensional model | Abstract |
(Rus) |
| Kurennov S.S., Barakhov K.P. | |||
| No 1 (2019) | Autowave mechanics of metal plasticity | Abstract |
(Rus) |
| Zuev L.B., Barannikova S.A. | |||
| No 2 (2019) | Filtration in Fluid-Saturated Poro-Plastic MaterialS during Lateral Extrusion | Abstract |
(Rus) |
| Sevastyanov G.M. | |||
| No 4 (2019) | Determination of the critical velocity of the fluid flowing in a single-walled carbon nanotubes embedded in a polymer matrix | Abstract |
(Rus) |
| Lolov D.S., Lilkova-Markova S.V. | |||
| No 1 (2019) | The Research of the Mechanical Behavior of Elastically Transformable Composite Structures | Abstract |
(Rus) |
| Khaliulin V.I., Batrakov V.V., Shabalin L.P., Kiauka M.Y., Bezzametnov O.N. | |||
| 201 - 300 of 669 Items | << < 1 2 3 4 5 6 7 > >> | ||