ARTICLES
Issue | Title | Abstract | File |
No 3 (2022) | Study of deformation structures maps in metals under tension | Abstract |
(Rus) |
Barannikova S.A., Iskhakova P.V. | |||
No 2 (2022) | Contour integrals in nonlinear fracture mechanics for mixed forms of deformation | Abstract |
(Rus) |
Tartygasheva A.M. | |||
No 4 (2022) | EVALUATION OF THE THERMAL AND MOISTURE AGING INFLUENCE IN AGGRESSIVE ENVIRONMENTS ON THE CHANGE IN THE OF THE MECHANICAL BEHAVIOR OF FIBERGLASS BY A SHORT BEAM BENDING TESTS BASED ON ACOUSTIC EMISSION TECHNIQUE | Abstract |
(Rus) |
Lobanov D.S., Lunegova E.M. | |||
No 3 (2022) | EFFECT OF SYNCHRONIZATION OF CONTINUOUS ACOUSTIC EMISSION STATISTICAL PROPERTIES DURING STRUCTURALLY HETEROGENEOUS MATERIALS DEFORMATION | Abstract |
(Rus) |
Panteleev I.A., Bayandin Y.V., Plekhov O.A. | |||
No 4 (2022) | ELECTROMAGNETIC COUPLING OF PIEZOELECTRIC/FERRITE COMPOSITE WITH INITIAL STRESS STATE | Abstract |
(Rus) |
Pan’kov A.A. | |||
No 1 (2022) | The method of fictitious discrete models in calculations of composite bodies | Abstract |
(Rus) |
Matveev A.D. | |||
No 3 (2022) | ON THE INFLUENCE OF THE MECHANICAL CHARACTERISTICS OF A THIN ADHESION LAYER ON THE COMPOSITE STRENGTH. PART 1. ELASTIC DEFORMATION | Abstract |
(Rus) |
Bogacheva V.E., Glagolev V.V., Glagolev L.V., Markin A.A. | |||
No 2 (2022) | Energy conditions for the formation of magnesium hydride | Abstract |
(Rus) |
Aptukov V.N., Skryabina N.E., Fruchart D. | |||
No 4 (2022) | ANALYSIS OF MESOSTRUCTURE AND FRACTURE KINETICS OF ELEMENTS OF LATTICE COMPOSITE STRUCTURES UNDER TRANSVERSAL COMPRESSION USING STOCHASTIC FEA MICROMECHANICS | Abstract |
(Rus) |
Sapozhnikov S.B., Shaburova N.A., Ignatova A.V., Shanygin A.N. | |||
No 3 (2022) | Cycle life prediction under low cycle fatigue using nonlinear Marco - Starkey model | Abstract |
(Rus) |
Lykova A.V., Ilinykh A.V., Wildemann V.E. | |||
No 1 (2022) | Finite element calculation of an elliptical cylinder in a geometrically nonlinear formulation using the vector form of the interpolation procedure | Abstract |
(Rus) |
Klochkov Y.V., Dzhabrailov A.S., Ishchanov T.R., Marchenko S.S., Andreev A.S., Klochkov M.Y. | |||
No 3 (2022) | Features of diffusion-controlled processes of regulated volumetric synthesis from powder mixtures Ti-Al-Fe-Fe2O3 | Abstract |
(Rus) |
Knyazeva A.G., Anisimova M.A., Korosteleva E.N. | |||
No 2 (2022) | Analysis of the limiting states of cylindrical elastic-plastic shells under tension and combined loading by internal pressure and tension | Abstract |
(Rus) |
Bazhenov V.G., Kazakov D.A., Osetrov S.L., Osetrov D.L., Ryabov A.A. | |||
No 4 (2022) | A NUMERICAL ANALYSIS OF FORCED STEADY-STATE VIBRATIONS OF AN ELECTRO-VISCOELASTIC SYSTEM IN CASE OF A JOINT IMPACT OF ELECTRICAL AND MECHANICAL LOADS | Abstract |
(Rus) |
Iurlova N.А., Oshmarin D.A., Sevodina N.V. | |||
No 3 (2022) | Postbuckling Behavior of Compressed Bars with Nonlinearly Elastic Supports | Abstract |
(Rus) |
Kayumov R.A. | |||
No 1 (2022) | Mathematical model of oxide film deformation on the surface of a metallic melt in an alternating magnetic field | Abstract |
(Rus) |
Nikulin I.L., Demin V.A. | |||
No 3 (2022) | Numerical simulation of the nickel alloy microstructure formed in the process of hot fogging | Abstract |
(Rus) |
Rogovoy A.A., Salikhova N.K. | |||
No 2 (2022) | Solution of the plane problem of the theory of elasticity on bending of an articulated fixed multilayer panel with a circular axis | Abstract |
(Rus) |
Bukaty S.A., Osadchy N.V. | |||
No 4 (2022) | PREDICTION OF THE BEARING CAPACITY OF THE HIP JOINT ENDOPROSTHESIS FROM THE С/C COMPOSITES | Abstract |
(Rus) |
Razumovskii E.S., Shavshukov V.E., Anoshkin A.N. | |||
No 3 (2022) | Low-cycle fatigue of V-notched cylindrical samples of bronze alloy | Abstract |
(Rus) |
Abashev D.R. | |||
No 1 (2022) | ON THE CONVEXITY OF POTENTIAL OF NONLINEAR ELASTIC MEDIA MODEL WITH TENSOR DAMAGE PARAMETER | Abstract |
(Rus) |
Panteleev I.A., Lyakhovsky V. | |||
No 3 (2022) | Development of the digital image correlation (DIC) method for mechanical testing at elevated temperatures | Abstract |
(Rus) |
Strungar E.M., Lobanov D.S. | |||
No 2 (2022) | Modeling of the elastoplastic deformation process of single crystal superalloys | Abstract |
(Rus) |
Grishchenko A.I., Semenov A.S. | |||
No 4 (2022) | REFINED DISCRETE METHOD FOR CALCULATING STIFFENED ORTHOTROPIC SHELLS | Abstract |
(Rus) |
Semenov A.A. | |||
No 3 (2022) | Memory surfaces separating the processes of monotonous and cyclic loads | Abstract |
(Rus) |
Bondar V.S., Abashev D.R. | |||
No 1 (2022) | Calculation of VAT and assessment of the strength of a segmented cylindrical shell made of composite materials with metal inserts | Abstract |
(Rus) |
Rogozhnikova E.N., Anoshkin A.N., Bulbovich R.V. | |||
No 3 (2022) | The influence exerted by active cooling on the permanent connection formed as a result of electric arc welding | Abstract |
(Rus) |
Tkacheva A.V., Abashkin E.E. | |||
No 2 (2022) | Modelling the effect of vibrations on the surface tension of a liquid droplet using meshless methods | Abstract |
(Rus) |
Davlyatshin R.P., Perminov A.V., Bayandin Y.V., Saucedo-Zendejo F.R., Trushnikov D.N. | |||
No 4 (2022) | IDENTIFICATION OF THE IMPACT POSITION IN A REINFORCED CONCRETE STRUCTURE BASED ON THE ANALYSIS OF THE RESPONSE OF VIBRATION SENSORS | Abstract |
(Rus) |
Tsvetkov R.V., Shardakov I.N., Glot I.O., Gusev G.N., Yepin V.V., Shestakov A.P. | |||
No 3 (2022) | EVALUATION OF THE DYNAMICS OF ELASTIC PLATE AND LIQUID SECTION DYNAMIC ABSORBER | Abstract |
(Rus) |
Mirsaidov M.M., Dusmatov O.M., Khodjabekov M.U. | |||
No 1 (2022) | Calculation of the thermal conductivity coefficient of nanocrystals | Abstract |
(Rus) |
Severyukhin A.V., Severyukhina O.Y., Vakhrushev A.V. | |||
No 3 (2022) | Modal analysis of a hydrogen-damaged pipe as shell inhomogeneous on thickness | Abstract |
(Rus) |
Filippenko G.V., Zinovieva T.V. | |||
No 2 (2022) | Solution of a mixed nonaxisymmetric problem of the theory of elasticity for anisotropic bodies of revolution | Abstract |
(Rus) |
Ivanychev D.A. | |||
No 4 (2022) | MODELING OF CREEP PROCESSES OF SINGLE-CRYSTAL ALLOYS WITH TAKING INTO ACCOUNT OF RAFTING | Abstract |
(Rus) |
Grishchenko A.I., Semenov A.S. | |||
No 3 (2022) | Effect of mechanical load on resultant composite piezomodules | Abstract |
(Rus) |
Pan’kov A.A. | |||
No 1 (2022) | Evolution of the grain structure of metals and alloys under severe plastic deformation: continuum models | Abstract |
(Rus) |
Trusov P.V., Ostanina T.V., Shveykin A.I. | |||
No 4 (2022) | INFLUENCE OF HIGH TEMPERATURE TREATMENT ON THE MECHANICAL CHARACTERISTICS OF CARBON-CARBON COMPOSITE MATERIALS WITHPYROCARBON MATRIX | Abstract |
(Rus) |
Magnitskaya M.V., Magnitsky I.V., Tashchilov S.V., Tsvetkov D.A. | |||
No 2 (2022) | About preliminary statistical processing of information on the study of fatigue strength of machine parts | Abstract |
(Rus) |
Kulagin A.V., Russkih E.V. | |||
No 4 (2022) | STABILITY OF POSTCRITICAL DEFORMATION DURING TORSION OF THICK-WALLED CYLINDRICAL SOLID | Abstract |
(Rus) |
Wildemann V.E., Mugatarov A.I. | |||
No 1 (2022) | Utilization of viscoelatic models with non-linear springs and dashpots in delamination study of multilayered beams | Abstract |
(Rus) |
Rizov V.I. | |||
No 3 (2022) | Vibrations of a strip with delamination in the framework of the one-parameter Aifantis model of gradient elasticity theory | Abstract |
(Rus) |
Vatulyan A.O., Yavruyan O.V. | |||
No 1 (2022) | Two-dimensional model of grain boundary diffusion and oxidation | Abstract |
(Rus) |
Chepak-Gizbrekht M.V., Knyazeva A.G. | |||
No 4 (2022) | INFLUENCE OF GEOMETRIC, KINEMATIC, GAS-DYNAMIC PARAMETERS ON ROTOR DYNAMIC STATE TAKING INTO ACCOUNT GAS DYNAMIC FLOW IN LABYRINTH SEALS CLEARANCES | Abstract |
(Rus) |
Modorskii V.Y., Cherepanov I.E., Babushkina A.V. | |||
No 2 (2022) | Contact problems for a transversely isotropic layer | Abstract |
(Rus) |
Pozharskii D.A., Zolotov N.B. | |||
No 4 (2022) | SIMULATION OF INTERIM FORGING OF DEPOSITED PRODUCTS IN ANSYS MECHANICAL APDL (IMPLICIT ANALYSIS) | Abstract |
(Rus) |
Smetannikov O.Y., Trushnikov D.N., Anisimov A.A. | |||
No 1 (2022) | Numerical simulation of brush seal tests | Abstract |
(Rus) |
Bondar V.S., Rodin E.V. | |||
No 3 (2022) | Calculation of effective properties of geocomposites based on computed tomography images | Abstract |
(Rus) |
Artamonova N.B., Sheshenin S.V., Orlov E.A., Bichen Z., Frolova J.V., Khamidullin I.R. | |||
No 2 (2021) | Contradictions in the Plane Contact Problem of the Theory of Elasticity on the Compression of Cylinders in Contact with Parallel Generators | Abstract |
(Rus) |
Abdeyev B.M., Brim T.F., Muslimanova G. | |||
No 3 (2021) | The Numerical simulation of composite sandwich cylindrical shells reinforced with circular frames under local loadings | Abstract |
(Rus) |
Sukhomlinov L.G., Shivrin M.V. | |||
No 2 (2021) | On the Theory of Elasticity of Microinhomogeneous Media with Account for Stochastic Changes in the Connectivity of Constituent Components | Abstract |
(Rus) |
Saraev L.A. | |||
No 4 (2021) | Investigation of the stress-strain state of a hollow cylinder with a coating based on the gradient model of thermoelasticity | Abstract |
(Rus) |
Vatulyan A.O., Nesterov S.A., Yurov V.O. | |||
No 1 (2021) | Effectiveness of 2-D and 3-D modelling of dovetail joint of composite fan blade for choosing rational reinforcement schemes | Abstract |
(Rus) |
Guseinov K., Kudryavtsev O.A., Sapozhnikov S.B. | |||
No 3 (2021) | Elastic diffusion vibrations of an isotropic Kirchhoff-Love plate under an unsteady distributed transverse load | Abstract |
(Rus) |
Yu G., Zemskov A.V., Tarlakovskii D.V. | |||
No 2 (2021) | The Influence of the Friction-Sliding Coefficient of Support Structures and Parameters of Seismic Actions on Reactions and Reliability of Structures with Seismic Protection | Abstract |
(Rus) |
Abakarov A.D., Zainulabidova H.R. | |||
No 3 (2021) | Effect of plastic compressibility on the strain rate intensity factor in compression of a material layer between parallel plates | Abstract |
(Rus) |
Lyamina E.A., Novozhilova O.V. | |||
No 2 (2021) | Modeling the Mechanical Response of Auxetic Metamaterials to Dynamic Effects | Abstract |
(Rus) |
Skripnyak V.V., Chirkov M.O., Skripnyak V.A. | |||
No 4 (2021) | Investigation of the features of crystallization of granules of high-strength aluminum alloys of the Al-Zn-Mg-Cu system at ultra-high cooling rates | Abstract |
(Rus) |
Zharov M.V. | |||
No 1 (2021) | Analysis of the stability of the computational algorithm to a change in the geometric parameters of cylindrical shell structures | Abstract |
(Rus) |
Bakusov P.A., Semenov A.A. | |||
No 3 (2021) | The Applied mechanical and mathematical model of grinding of a solid particle by static crushing | Abstract |
(Rus) |
Guryanov G.A., Abdeev B.M., Baigereyev S.R., Kim V.A., Suleimenov A.D. | |||
No 2 (2021) | Numerical Algorithms for Simulation of a Fluid-Filed Fracture Evolution in a Poroelastic Medium | Abstract |
(Rus) |
Borisov V.E., Ivanov A.V., Kritsky B.V., Savenkov E.B. | |||
No 3 (2021) | Algorithm for topology optimization of a structure made of anisotropic material with consideration of the reinforcement orientation parameters | Abstract |
(Rus) |
Fedulov B.N., Fedorenko A.N., Antonov F.K., Lomakin E.V. | |||
No 2 (2021) | Extreme Clusters of Grains in Random Microstructures of Polycrystals | Abstract |
(Rus) |
Tashkinov A.A., Shavshukov V.E. | |||
No 4 (2021) | Multilevel model of polycrystals: application to assessing the effect of texture and grains misorientation on the critical deformation of the dynamic recrystallization initiation | Abstract |
(Rus) |
Kondratev N.S., Trusov P.V., Podsedertsev A.N. | |||
No 1 (2021) | Studying Deformation Behaviors in Austenitic Stainless Steels within a Temperature Range of 143 K < T < 420 K | Abstract |
(Rus) |
Barannikova S.A., Nikonova A.M., Kolosov S.V. | |||
No 3 (2021) | Comparison of foam models from regular and irregular arrays of Gibson-Ashby open-cells | Abstract |
(Rus) |
Kornievsky A.S., Nasedkin A.V. | |||
No 2 (2021) | Healing of Internal Defects in a Compressive Stress Field Using the Plastic Properties of Materials | Abstract |
(Rus) |
Bukhalov V.I., Perelmuter M.N., Popov A.L. | |||
No 3 (2021) | Simulation of the hot isostatic pressing process | Abstract |
(Rus) |
Khlybov A.A., Belyaev E.S., Ryabtsev A.D., Ryabov D.A., Belyaeva S.S., Getmanovsky Y.A., Yavtushenko P.M. | |||
No 2 (2021) | Modeling the Effective Conductive Properties of Polymer Nanocomposites with a Random Arrangement of Graphene Oxide Particles | Abstract |
(Rus) |
Tashkinov M.A., Dobrydneva A.D., Matveenko V.P., Silberschmidt V.V. | |||
No 4 (2021) | The potential of using SWCNTs, MWCNTs and CNFs capable of increasing the composite material dimensional and technological stability as modifiers of a polymer matrix | Abstract |
(Rus) |
Obvertkin I.V., Pasechnik K.A., Vlasov A.Y. | |||
No 1 (2021) | Compensatory bellows oscillations as a corrugated shell with liquid inside | Abstract |
(Rus) |
Zinovieva T.V., Piskunov V.A. | |||
No 3 (2021) | Finite Element Model Updating Method of Dynamic Systems | Abstract |
(Rus) |
Krasnorutskiy D.A., Lakiza P.A., Berns V.A., Zhukov E.P. | |||
No 2 (2021) | The Image-Based Finite Element Evaluation of the Deformed State | Abstract |
(Rus) |
Vorobiev O.V., Semenova E.V., Mukhin D.A., Statsenko E.O., Baltina T.V., Gerasimov O.V. | |||
No 3 (2021) | Crack growth in rotor P2M steel at elevated temperature | Abstract |
(Rus) |
Shlyannikov V.N., Kosov D.A., Fedorenkov D.I., Zhang X.C., Tu S.T. | |||
No 2 (2021) | The nonstationary thermoelectric elasticity problem for a long piezoceramic cylinder | Abstract |
(Rus) |
Shlyakhin D.A., Kalmova M.A. | |||
No 4 (2021) | Anti-icing indicator polymer coating with built-in fiber-optic PEL-sensor for indication, location and de-icing of aerodynamic surfaces | Abstract |
(Rus) |
Pan’kov A.A., Pisarev P.V. | |||
No 1 (2021) | Influence of preliminary thermal aging on the residual interlayer strength and staging of damage accumulation in structural carbon plastic | Abstract |
(Rus) |
Lobanov D.S., Lunegova E.M., Mugatarov A.I. | |||
No 3 (2021) | Simulation of impact failure of tubular samples made of composite material, depending on the loading rate | Abstract |
(Rus) |
Fedorenko A.N., Fedulov B.N., Lomakin E.V. | |||
No 2 (2021) | The deformation model of the DCB-sample with elastoplastic properties | Abstract |
(Rus) |
Glagolev V.V., Markin A.A. | |||
No 4 (2021) | DETERMINATION OF THE STRESS STATE AND THE FORCE OF DEFORMATION OF BALL-SHAPED BILLETS IN A CLOSED MATRIX | Abstract |
(Rus) |
Ashkeyev Z.A., Andreyachshenko V.A., Abishkenov M.Z., Bukanov Z.U. | |||
No 2 (2021) | The Refined Model of the Elastic-Plastic Dynamic Behavior of Reinforced Curved Panels Sensitive to Strain Rate | Abstract |
(Rus) |
Yankovskii A.P. | |||
No 4 (2021) | Influence of the stress-strain state on the jerky flow effects and kinetics of the strain bands nucleation in Al-Mg alloy (A 95456) | Abstract |
(Rus) |
Tretyakova T.V., Tretyakov M.P., Lunegova E.M. | |||
No 1 (2021) | Constitutive relations for materials with strain state dependent properties | Abstract |
(Rus) |
Lomakin E.V., Tishin P.V. | |||
No 3 (2021) | Frequency characteristics of built-in fiber-optic PEL-sensor to diagnose complex harmonic deformations within the polymer composite structure | Abstract |
(Rus) |
Pan’kov A.A., Pisarev P.V. | |||
No 2 (2021) | An Analytical Approach to Obtaining the Stress Field of a Cylindrical Shell with a Circular Hole under Tension | Abstract |
(Rus) |
Kashtanova S.V., Rzhonsnitskiy A.V. | |||
No 4 (2021) | Composite materials in aircraft engine blades | Abstract |
(Rus) |
Khayrnasov K.Z. | |||
No 2 (2021) | The Crack Growth in the Imitation Model of a GTE Turbine Disk under Operating Loading Conditions | Abstract |
(Rus) |
Yarullin R.R., Shlyannikov V.N., Sulamanidze A.G. | |||
No 4 (2021) | Analysis of stress fields at the crack tip and fracture resistance parameters under conditions of gradient plasticity | Abstract |
(Rus) |
Khamidullin R.M., Fedotova D.V. | |||
No 1 (2021) | Contact problems for an inhomogeneous elastic wedge with variable Poisson’s ratio | Abstract |
(Rus) |
Pozharskii D.A., Pozharskaia E.D. | |||
No 3 (2021) | Mathematical modeling of relaxation of residual stresses in thin-walled pipelines in the delivery state and after bilateral surface hardening at creep | Abstract |
(Rus) |
Radchenko V.P., Berbasova T.I., Tsvetkov V.V., Saushkin M.N. | |||
No 2 (2021) | Research and Modeling of Viscoelastic Behavior of Elastomeric Nanocomposites | Abstract |
(Rus) |
Kislitsyn V.D., Mokhireva K.A., Shadrin V.V., Svistkov A.L. | |||
No 4 (2021) | Simultaneous identification of mechanical properties of functionally graded plates under the Kirchhoff and Tymoshenko models | Abstract |
(Rus) |
Bogachev I.V. | |||
No 3 (2021) | The Influence of thickness on residual flexural strength of composite with low-velocity impact damages: Experimental study | Abstract |
(Rus) |
Kudryavtsev O.A., Ignatova A.V., Olivenko N.A. | |||
No 4 (2021) | Elastic-plastic invariant of autowave plasticity | Abstract |
(Rus) |
Zuev L.B., Barannikova S.A., Gorbatenko V.V. | |||
No 1 (2021) | Experimental determination and finite element analysis of coefficients of the multi-parameter Williams series expansion in the vicinity of the crack tip in linear elastic materials. Part II | Abstract |
(Rus) |
Stepanova L.V. | |||
No 3 (2021) | Identification of gyroscopic forces in the oscillatory system of a Coriolis flowmeter | Abstract |
(Rus) |
Romanov V.A., Beskachko V.P. | |||
No 2 (2021) | A Comparison of Experimental and Computation Results of Finding Effective Characteristics of Elastic Properties of Polymer Layered Composites from Carbon and Glass Fabrics | Abstract |
(Rus) |
Muyzemnek A.Y., Ivanova T.N., Kartashova E.D. | |||
No 4 (2021) | Crack root radius effect on stress fields under nonlinear | Abstract |
(Rus) |
Boychenko N.V. | |||
No 3 (2021) | Importance of thermal conductivity and stress level during a phase (hydride) transformation in magnesium | Abstract |
(Rus) |
Aptukov V.N., Tsirulnik I.I., Skryabina N.E., Fruchart D. | |||
No 4 (2021) | © ПНИПУ Numerical and experimental research of the evaluation of the mechanical behavior of carbon fiber reinforced polymerspecimens with an embedded Smart-layer | Abstract |
(Rus) |
Baranov M.A., Nikiforov A.S., Mikryukov A.O., Ermakov D.A. | |||
No 1 (2021) | Interpretation of the generalized parameter of the probability of failure through the plastic stress intensity factor | Abstract |
(Rus) |
Tumanov A.V., Boychenko N.V. | |||
101 - 200 of 659 Items | << < 1 2 3 4 5 6 7 > >> |