| Issue |
Title |
| No 1 (2024) |
VARIATIONAL-DIFFERENCE SOLUTION OF DEFORMATION AND BUCKLING PROBLEMS OF ELASTOPLASTIC SHELLS OF REVOLUTION WITH ELASTIC FILLER UNDER COMBINED QUASI-STATIC AND DYNAMIC AXISYMMETRIC LOADINGS |
|
|
Bazhenov V.G., Kalinina Y.A., Nagornykh E.V., Samsonova D.A. |
| No 4 (2022) |
ELECTROMAGNETIC COUPLING OF PIEZOELECTRIC/FERRITE COMPOSITE WITH INITIAL STRESS STATE |
|
|
Pan’kov A.A. |
| No 4 (2022) |
DETERMINATION OF THE CONTACT AREA UNDER CYCLIC LOADING OF CONTACT PAIRS OF ISOTROPIC MATERIALS ON THE BASIS OF 3D SURFACE MICRORELIEF MODELLING |
|
|
Ezhov A.D., Bykov L.V., Krylova Y.A. |
| No 5 (2023) |
CRYSTAL PLASTICITY FINITE-ELEMENT SIMULATIONS FOR QUASISTATIC DEFORMATION OF POLYCRYSTALS IN TERMS OF EXPLICIT DYNAMICS |
|
|
Romanova V.A., Balokhonov R..., Borodina A., Shakhidzhanov V.S., Lychagin D.V., Emelianova E.S., Pisarev M. |
| No 5 (2023) |
THE PHYSICAL AND MECHANICAL MODEL OF ELECTROCHEMICAL PROCESSES OF FORMING COPPER AND ELECTROСORUNDUM MICRO- AND NANOCOMPOSITE COATINGS |
|
|
Molchanov E.K., Vakhrushev A.V. |
| No 5 (2023) |
THE INFLUENCE OF THE STRUCTURAL ORGANIZATION OF CHIRAL METAMATERIALS ON THEIR PHYSICAL AND MECHANICAL CHARACTERISTICS |
|
|
Akhmetshin L.R., Smolin I.Y. |
| No 1 (2019) |
The Research of the Mechanical Behavior of Elastically Transformable Composite Structures |
|
|
Khaliulin V.I., Batrakov V.V., Shabalin L.P., Kiauka M.Y., Bezzametnov O.N. |
| No 1 (2023) |
PROGRAMMABLE BEHAVIOR OF THE METAMATERIAL BY KINDS OF UNIT CELLS CONNECTION |
|
|
Akhmetshin L.R., Smolin I.Y. |
| No 2 (2020) |
Modeling the processes of atom structure formation of a superconducting spin valve |
|
|
Vakhrushev A.V., Fedotov A.Y., Savva Y.B., Sidorenko A.S. |
| No 2 (2014) |
Mathematical modelling of stratified flow of polymer melts in an axisymmetric formulation |
|
|
Bachurina M.V., Kazakov A.V., Trufanova N.M. |
| No 4 (2017) |
Numerical solution for an inverse problem about determination of volumetric heat capacity of rock mass during artificial freezing |
|
|
Zhelnin M.S., Plekhov O.A., Semin M.A., Levin L.Y. |
| No 2 (2024) |
COMPUTATIONAL-EXPERIMENTAL METHOD FOR STRESS-STRAIN CURVE CONSTRUCTING UNDER CONDITIONS OF INHOMOGENEOUS STRESS FIELDS |
|
|
Wildemann V.E., Mugatarov A.I., Khmelev A.A. |
| No 1 (2022) |
Two-dimensional model of grain boundary diffusion and oxidation |
|
|
Chepak-Gizbrekht M.V., Knyazeva A.G. |
| No 2 (2019) |
Studying of the influence of 3D wire deposition process parameters on the formation of residual deformations |
|
|
Smetannikov O.Y., Maksimov P.V., Trushnikov D.N., Permyakov G.L., Belenkiy V.Y., Farberov A.S. |
| No 1 (2016) |
Finite-element modelling of thermal and deformational processes in manufacturing high-strength wire |
|
|
Shavrin O.I., Skvortsov A.N. |
| No 4 (2023) |
ESTIMATING PARAMETERS OF PERMISSIBLE DEFECTS IN STRUCTURAL FIBERGLASS BASED ON THEORY OF CRITICAL DISTANCES |
|
|
Mullahmetov M.N., Lobanov D.S., Melnikova V.A., Yankin A.S. |
| No 2 (2021) |
The Image-Based Finite Element Evaluation of the Deformed State |
|
|
Vorobiev O.V., Semenova E.V., Mukhin D.A., Statsenko E.O., Baltina T.V., Gerasimov O.V. |
| No 1 (2019) |
The Effect of Preliminary Plastic Hardening by Tension on the Cylindrical Shells Buckling during Torsion |
|
|
Bazhenov V.G., Zhegalov D.V., Kazakov D.A., Kibec A.I., Nagornykh E.V., Samsonova D.A. |
| No 3 (2017) |
Modeling of elastic-plastic deformation of work material along multielement piecewise zig-zag linear trajectories |
|
|
Zubchaninov V.G., Alekseev A.A., Gultiaev V.I. |
| No 1 (2023) |
SIMULATION OF ELASTOPLASTIC FRACTURE OF A CENTER CRACKED PLATE |
|
|
Astapov N.S., Kurguzov V.D. |
| No 2 (2020) |
Investigation of the mechanical behavior of a two-phase Mg-Ni compound during fast compression |
|
|
Aptukov V.N., Skryabina N.E., Fruchart D. |
| No 2 (2014) |
Investigation of influence of stress state parameters of fault zones on peculiarities of their mechanical response under shear loading |
|
|
Astafurov S.V., Shilko E.V., Psakhie S.G. |
| No 1 (2018) |
Mathematical model of pulse scanning of pressure along a piezo-electro-luminescent fiber-optical sensor |
|
|
Pan’kov A.A. |
| No 1 (2022) |
Calculation of the thermal conductivity coefficient of nanocrystals |
|
|
Severyukhin A.V., Severyukhina O.Y., Vakhrushev A.V. |
| No 2 (2019) |
Description of the Effect of AlMg6 Alloy Strength Decrease during Temperature Increase under Dynamic Loading |
|
|
Bilalov D.A., Sokovikov M.A., Bayandin Y.V., Chudinov V.V., Oborin V.A., Naimark O.B. |
| No 3 (2016) |
Graph model of three-dimensional elastic solids in Cartesian Coordinates |
|
|
Tyrymov A.A. |
| No 4 (2023) |
MODELING OF AXIAL COMPRESSION OF V95/10% SIC ALUMINUM MATRIX COMPOSITE UNDER NON-STATIONARY THERMOMECHANICAL CONDITIONS |
|
|
Kryuchkov D.I., Nesterenko A.V., Zalazinsky A.G. |
| No 1 (2021) |
Experimental determination and finite element analysis of coefficients of the multi-parameter Williams series expansion in the vicinity of the crack tip in linear elastic materials. Part II |
|
|
Stepanova L.V. |
| No 1 (2014) |
Mathematical models of growth deformation |
|
|
Dolganova O.Y., Lokhov V.A. |
| No 3 (2017) |
STATE EQUATIONS OF THE DRAPH MODEL OF THREE-DIMENSIONAL ELASTIC SOLIDS IN CARTESIAN COORDINATES |
|
|
Tyrymov A.A. |
| No 4 (2019) |
Numerical modeling of nonlinear dynamic and static compression of the metal mesh |
|
|
Kochetkov A.V., Modin I.A., Leontev N.V., Turigina I.A., Poverennov E.Y. |
| No 3 (2014) |
MATHEMATICAL MODEL OF MOVEMENT OF A PULSING LAYER OF VISCOUS LIQUID IN THE CHANNEL WITH AN ELASTIC WALL |
|
|
Ageev R.V., Kuznetsova E.L., Kulikov N.I., Mogilevich L.I., Popov V.S. |
| No 2 (2018) |
Resonant diagnostics of temperature distribution by the piezo-electro-luminescent fiber-optical sensor according to the solution of the Fredholm integral equation |
|
|
Pan’kov A.A. |
| No 1 (2024) |
ON IDENTIFICATION OF PARAMETERS OF A NONLINEAR CONSOLIDATION MODEL OF SANDY SOIL |
|
|
Artamonova N.B., Sheshenin S.V. |
| No 1 (2022) |
Mathematical model of oxide film deformation on the surface of a metallic melt in an alternating magnetic field |
|
|
Nikulin I.L., Demin V.A. |
| No 4 (2018) |
On Modeling of Overhead TLC Galloping and Parametric Analysis of Pendulum Dampers Efficiency |
|
|
Sergey I.I., Vinogradov A.A., Danilin A.N., Kurdyumov N.N. |
| No 3 (2016) |
Evaluation of service life of heat-resistant alloys under cyclic thermomechanical loading |
|
|
Volkov I.A., Igumnov L.A. |
| No 4 (2023) |
STUDYING GRAPHENE ELECTROMECHANICAL BEHAVIOR BASED ON THE ELASTIC PLATES MOMENT-MEMBRANE THEORY |
|
|
Krylova E.Y., Sargsyan S.H. |
| No 4 (2020) |
Numerical simulation of deformation and fracture of metal-matrix composites with considering residual stresses |
|
|
Zemlianov A.V., Evtushenko E.P., Balokhonov R.R. |
| No 1 (2013) |
Simulation of the stress-strain state of thin composite coatings based on solutions of the plane problem of strain-gradient elasticity for a layer |
|
|
Lurie S.A., Solyaev Y.O., Rabinsky L.N., Kondratova Y.N., Volov M.I. |
| No 3 (2017) |
ANSYS numerical modeling of electroelastic fields in the piezoelectro luminescent fiber-optical sensor diagnosing the composite volume deformed state |
|
|
Pan’kov A.A., Pisarev P.V. |
| No 4 (2019) |
Analysis of models for porosity evolution in reservoir during steam injection |
|
|
Kostina A.A., Zhelnin M.S., Plekhov O.A. |
| No 4 (2014) |
MODELLING OF MARTENSITIC TRANSFORMATIONS IN STEELS: KINEMATICS OF THE MESO-LEVEL |
|
|
Nyashina N.D., Trusov P.V. |
| No 2 (2018) |
Stability of orthotropic doubly curved shallow shells with a movable hinged fixing of the border |
|
|
Kamenev I.V., Semenov A.A. |
| No 6 (2023) |
ANALYSIS OF THE INFLUENCE OF ALLOYING ADDITIONS ON THE STRUCTURE OF AL-LI ALLOYS AND DEFORMATION MECHANISMS UNDER SUPERPLASTIC CONDITIONS (AN ANALYTICAL REVIEW) |
|
|
Sharifullina E.R., Shveykin A.I., Trusov P.V. |
| No 1 (2022) |
Numerical simulation of brush seal tests |
|
|
Bondar V.S., Rodin E.V. |
| No 4 (2018) |
Determination of elastic and dissipative properties of concrete under dynamic deformation |
|
|
Shardakov I.N., Shestakov A.P., Glot I.O. |
| No 4 (2016) |
Methodology of numerical modelling of mechanical properties of the porous heat-shielding material based on ceramic fibers |
|
|
Lurie S.A., Rabinsckiy L.N., Solyaev Y.O., Bouznik V.M., Lizunova D.V. |
| No 4 (2023) |
ELASTIC-PLASTIC BEHAVIOR AND FRACTURE OF STRUCTURES WITH LOSS CONCENTRATORS UNDER CYCLIC LOADS |
|
|
Bondar V.S., Abashev D.R., Fomin D.J. |
| No 4 (2020) |
Analysis of the fracture toughness parameters at the free edge in layered composites |
|
|
Bondarchuk D.A., Fedulov B.N., Fedorenko A.N., Lomakin E.V. |
| No 1 (2013) |
Very-high-cycle fatigue facture of titanium compressor disks |
|
|
Burago N.G., Zhuravlev A.B., Nikitin I.S. |
| No 4 (2017) |
ESTIMATION OF CRACK PROPAGATION DIRECTION ANGLE UNDER MIXED-MODE LOADING (MODE I AND MODE II): GENERALIZED FRACTURE MECHANICS CRITERIA AND ATOMISTIC MODELING (MOLECULAR DYNAMICS METHOD) |
|
|
Stepanova L.V., Bronnikov S.A., Belova O.N. |
| No 4 (2022) |
A NUMERICAL ANALYSIS OF FORCED STEADY-STATE VIBRATIONS OF AN ELECTRO-VISCOELASTIC SYSTEM IN CASE OF A JOINT IMPACT OF ELECTRICAL AND MECHANICAL LOADS |
|
|
Iurlova N.А., Oshmarin D.A., Sevodina N.V. |
| No 4 (2019) |
Experimental and theoretical study of mechanical deformation of freezing saturated soil |
|
|
Zhelnin M.S., Prokhorov A.E., Kostina A.A., Plekhov O.A. |
| No 4 (2014) |
Coupled model of fluid-saturated porous materials based on a combination of discrete and continuum approaches |
|
|
Dimaki A.V., Shilko E.V., Astafurov S.V., Korostelev S.Y., Psakhie S.G. |
| No 6 (2023) |
SIMULATING THE STRESS-STRAIN STATE DURING LASER METAL DEPOSITION TO DETERMINE THE FINAL WARPING OF PRODUCTS |
|
|
Smetannikov O.Y., Bekmansurov M.R., Ilinykh G.V., Dongauzer K.A. |
| No 4 (2021) |
© ПНИПУ Numerical and experimental research of the evaluation of the mechanical behavior of carbon fiber reinforced polymerspecimens with an embedded Smart-layer |
|
|
Baranov M.A., Nikiforov A.S., Mikryukov A.O., Ermakov D.A. |
| No 4 (2018) |
Dynamic deformation interaction of elements of the “drummer-gasket-reinforced concrete beam” system |
|
|
Sobyanin K.V., Shardakov I.N., Shestakov A.P., Glot I.O. |
| No 4 (2016) |
The influence of fluid filtration on the strength of porous fluid-saturated brittle materials |
|
|
Dimaki A.V., Shilko E.V., Astafurov S.V., Psakhie S.G. |
| No 4 (2023) |
ANALYSIS OF METHODS FOR CONSTRUCTING TRUE DEFORMATION DIAGRAMS OF ELASTOPLASTIC MATERIALS UNDER LARGE DEFORMATIONS |
|
|
Bazhenov V.G., Kazakov D.A., Kukanov S.S., Osetrov D.L., Ryabov A.A. |
| No 4 (2020) |
Investigation of the Winkler foundation model applicability for describing the contact interaction of elastoplastic shells with a core under external pressure |
|
|
Bazhenov V.G., Nagornykh E.V., Samsonova D.A. |
| No 2 (2013) |
Numerical and experimental research the pressure drop in a pipe of variable cross section |
|
|
Syanov S.L. |
| No 2 (2017) |
Multiscale modeling and formation analysis of technological interlaminar stresses in thick-walled GFRP rings |
|
|
Bezmelnitsyn A.V., Sapozhnikov S.B. |
| No 4 (2022) |
SIMULATION OF VIBRATORY PLATE INTERACTION WITH THE GROUND SURFACE |
|
|
Tyuremnov I.S., Efimov S.S. |
| No 3 (2019) |
Buckling Problem of Composite Thin-Walled Structures with Properties Dependent on Loading Types |
|
|
Fedorenko A.N., Fedulov B.N., Lomakin E.V. |
| No 1 (2015) |
Deformation processes of elastoplastic material with defects under electrodynamic loading |
|
|
Kukudzhanov K.V., Levitin A.L. |
| No 6 (2023) |
NUMERICAL SIMULATION OF THE INTERACTION BETWEEN A WAVE IN HYDROGEN AND A BARRIER IN A MODEL CHANNEL |
|
|
Seregina M.A., Babushkina A.V., Modorskii V.Y., Cherepanov I.E., Mikryukov A.O. |
| No 4 (2021) |
Anti-icing indicator polymer coating with built-in fiber-optic PEL-sensor for indication, location and de-icing of aerodynamic surfaces |
|
|
Pan’kov A.A., Pisarev P.V. |
| No 4 (2018) |
Construction and analysis of finite-element models of inhomogeneous deformable solids based on scanning |
|
|
Pykhalov A.A., Duong V.L., Tolstikov V.G. |
| No 3 (2016) |
A numerical study of stress-strain state evolution in structurally inhomogeneous materials subjected to uniaxial loading |
|
|
Smirnov S.V., Konovalov A.V., Myasnikova M.V., Khalevitsky Y.V., Smirnov A.S. |
| No 3 (2023) |
NON-CONTACT DEFORMATION WITH REVERSIBLE SURFACE PLASTIC DEFORMATION |
|
|
Zaides S.A., Nguyen N.N. |
| No 3 (2020) |
Numerical algorithm for searching for layouts of electroelastic bodies with external electric circuits for obtaining the best damping properties |
|
|
Iurlova N.A., Oshmarin D.A., Sevodina N.V., Iurlov M.A. |
| No 3 (2013) |
MATEMATIChESKAYa MODEL' KONVEKTsII NIKELEVOGO RASPLAVA PRI INDUKTsIONNOM PEREPLAVE. REShENIE MAGNITNOY PODZADAChI |
|
|
Nikulin I.L., Perminov A.V. |
| No 4 (2017) |
Theoretical and experimental study of structural elements’ influence of fiber-optic strain sensor on its readings and correction procedure for transfer function |
|
|
Sozonov N.S., Shardakov I.N. |
| No 4 (2022) |
INFLUENCE OF GEOMETRIC, KINEMATIC, GAS-DYNAMIC PARAMETERS ON ROTOR DYNAMIC STATE TAKING INTO ACCOUNT GAS DYNAMIC FLOW IN LABYRINTH SEALS CLEARANCES |
|
|
Modorskii V.Y., Cherepanov I.E., Babushkina A.V. |
| No 3 (2019) |
The Modeling of the Edge Fatigue Crack Growth under High Frequency Loading |
|
|
Nikitin A.D., Nikitin I.S., Stratula B.A. |
| No 1 (2015) |
Mathematical modelling of dynamics plastic forming of aft fairing in missile transformed during flight |
|
|
Vetrov V.V., Dunaev V.A., Kostyanoi E.M., Mikheev K.N., Panferov P.V. |
| No 4 (2021) |
The potential of using SWCNTs, MWCNTs and CNFs capable of increasing the composite material dimensional and technological stability as modifiers of a polymer matrix |
|
|
Obvertkin I.V., Pasechnik K.A., Vlasov A.Y. |
| No 4 (2018) |
The Experimental and Theoretical Study of Large Deformations of Cylindrical Samples from Steel 09G2S with Stress Concentrators under Tension-Torsion Loading to Failure |
|
|
Bazhenov V.G., Kazakov D.A., Nagornykh E.V., Osetrov D.L., Ryabov A.A. |
| No 2 (2016) |
Manufacturing defects in composite flanges: modelling and analysis of influence on static strength |
|
|
Anoshkin A.N., Zuiko V.Y., Osokin V.M., Tretyakov A.A., Pisarev P.V. |
| No 2 (2023) |
INFLUENCE OF SURFACE CHARGE ON THE FORMATION OF THE CARBONIZED LAYER RELIEF ON THE POLYMER SURFACE DURING ION-PLASMA TREATMENT |
|
|
Beliaev A.Y., Izyumov R.I., Svistkov A.L. |
| No 3 (2020) |
Diagnostics of impregnation defects of reinforcing filaments of polymer composite with built-in fibre-optic sensor with distributed Bragg grating |
|
|
Pan’kov A.A. |
| No 3 (2013) |
MATEMATIChESKOE MODELIROVANIE USTANOVIVShEYSYa FIL'TRATsII S MNOGOZNAChNYM ZAKONOM |
|
|
Badriev I.B., Nechaeva L.A. |
| No 4 (2017) |
Modeling of the product termomechanical behavior during 3D deposition of wire materials in ANSYS |
|
|
Smetannikov O.Y., Trushnikov D.N., Maksimov P.V., Bartolomey M.L., Kovyazin A.V. |
| No 3 (2024) |
FINITE-DIFFERENCE ANALYSIS OF PLANE-PARALLEL AND PLANE-RADIAL FLOWS IN THE ELASTIC MODE OF LIQUID AND GAS FILTRATION |
|
|
Eremin M.O., Bakeev R.A., Stefanov Y.P., Chirkov A.O., Pazhin A. |
| No 3 (2022) |
Formulation and Numerical Solution of the Stability Loss Problem of Elastic-Plastic Shells of Revolution with an Elastic Filler under Combined Axisymmetric and Torsional Loadings |
|
|
Bazhenov V.G., Kazakov D.A., Kibec A.I., Nagornykh E.V., Samsonova D.A. |
| No 3 (2019) |
Stability of chemical reaction fronts in the vicinity of a blocking state |
|
|
Morozov A.V., Freidin A.B., Müller W.H. |
| No 4 (2015) |
Modeling the treatment of high-energy pulsed electromagnetic field of the micro-cracks in a polycrystalline metal |
|
|
Kukudzhanov K.V. |
| No 4 (2021) |
DETERMINATION OF THE STRESS STATE AND THE FORCE OF DEFORMATION OF BALL-SHAPED BILLETS IN A CLOSED MATRIX |
|
|
Ashkeyev Z.A., Andreyachshenko V.A., Abishkenov M.Z., Bukanov Z.U. |
| No 4 (2018) |
The methodical Aspects of Strength, Deformation and Energy characteristic Determination of Salt Rocks under Direct Tensile Loading of Rock Specimens in Laboratory Conditions |
|
|
Asanov V.A., Pankov I.L., Kuzminyh V.S., Morozov I.A. |
| No 3 (2016) |
Computational and experimental research of the contact debonding process when rigid reinforcement is pressed into concrete |
|
|
Kashevarova G.G., Martirosyan A.S., Travush V.I. |
| No 2 (2023) |
IDENTIFICATION OF STRESS INTENSITY FACTORS, T-STRESSES AND HIGHER-ORDER COEFFICIENTS OF REGULAR TERMS IN THE WILLIAMS SERIES EXPANSION THROUGH MOLECULAR DYNAMICS SIMULATIONS |
|
|
Stepanova L.V., Belova O.N. |
| No 3 (2020) |
Modeling the deformation process of a plate with a stress concentrator taking into account the postcritical stage of material deformation |
|
|
Wildemann V.E., Tretyakov M.P., Mugaratov A.I. |
| No 3 (2013) |
O reshenii zadachi ravnovesiya myagkoy setchatoy obolochki pri nalichii nagruzki, sosredotochennoy v tochke |
|
|
Badriev I.B., Banderov V.V., Zadvornov O.A. |
| No 3 (2017) |
Processing fine magnesium materials. Numerical simulation and experimental analyses |
|
|
Aptukov V.N., Romanov P.V., Skryabina N.E., Fruchart D. |
| No 3 (2024) |
NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF DYNAMIC DEFORMATION AND FAILURE ON IMPACT OF RECTANGULAR PLATES |
|
|
Bazhenov V.G., Ryabov A.A., Kukanov S.S., Ptitsyn S.O. |
| No 3 (2022) |
Effect of mechanical load on resultant composite piezomodules |
|
|
Pan’kov A.A. |
| No 3 (2019) |
The Analysis of residual stresses in layered composites with [0°/90°] layup |
|
|
Bondarchuk D.A., Fedulov B.N., Fedorenko A.N., Lomakin E.V. |
| No 4 (2015) |
Formation of divergent testing efforts and experimental evaluation of material strength under biaxial stretching |
|
|
Zenkov E.V., Tsvik L.B. |
| No 3 (2021) |
Frequency characteristics of built-in fiber-optic PEL-sensor to diagnose complex harmonic deformations within the polymer composite structure |
|
|
Pan’kov A.A., Pisarev P.V. |
| 1 - 100 of 125 Items |
1 2 > >> |
