| Issue |
Title |
| No 4 (2018) |
The Experimental and Theoretical Study of Large Deformations of Cylindrical Samples from Steel 09G2S with Stress Concentrators under Tension-Torsion Loading to Failure |
|
|
Bazhenov V.G., Kazakov D.A., Nagornykh E.V., Osetrov D.L., Ryabov A.A. |
| No 5 (2023) |
DEFORMATION OF A THIN FILM AFTER CONTACT LOSS WITH A CYLINDRICAL BASE AXIAL DELAMINATION |
|
|
Ustinov K.B., Gandilyan D.V. |
| No 4 (2018) |
Load interaction effects during near-threshold fatigue crack growth under variable amplitude: theory, model, experiment |
|
|
Savkin A.N., Sunder R., Denisevich D.S., Sedov A.A., Badikov K.A. |
| No 2 (2023) |
IDENTIFICATION OF STRESS INTENSITY FACTORS, T-STRESSES AND HIGHER-ORDER COEFFICIENTS OF REGULAR TERMS IN THE WILLIAMS SERIES EXPANSION THROUGH MOLECULAR DYNAMICS SIMULATIONS |
|
|
Stepanova L.V., Belova O.N. |
| No 4 (2021) |
Analysis of stress fields at the crack tip and fracture resistance parameters under conditions of gradient plasticity |
|
|
Khamidullin R.M., Fedotova D.V. |
| No 1 (2023) |
METHODS FOR REDUCING NOTCH SENSITIVITY OF HYBRID PSEUDO-DUCTILE POLYMER COMPOSITES WITH FABRIC REINFORCEMENT: EXPERIMENTAL STUDY |
|
|
Leshkov E.V., Olivenko N.A., Kudryavtsev O.A., Sapozhnikov S.B. |
| No 4 (2022) |
ELECTROMAGNETIC COUPLING OF PIEZOELECTRIC/FERRITE COMPOSITE WITH INITIAL STRESS STATE |
|
|
Pan’kov A.A. |
| No 4 (2020) |
Finite element method with account of singularity for mixed mode cracks |
|
|
Tartygasheva A.M., Shlyannikov V.N., Tumanov A.V. |
| No 3 (2014) |
FEATURES OF BEHAVIOR OF LOW-MODULUS VISCOELASTIC POLYMER COMPOSITES UNDER CHANGING STRAIN AMPLITUDE OF LOW-FREQUENCY COMPONENT OF BIHARMONIC LOAD |
|
|
Yankin A.S., Bulbovich R.V., Slovikov S.V., Wildemann V.E. |
| No 2 (2019) |
Plastic stress intensity factor in fracture mechanics |
|
|
Zakharov A.P., Shlyannikov V.N., Ishtyryakov I.S. |
| No 5 (2023) |
THE INFLUENCE OF THE STRUCTURAL ORGANIZATION OF CHIRAL METAMATERIALS ON THEIR PHYSICAL AND MECHANICAL CHARACTERISTICS |
|
|
Akhmetshin L.R., Smolin I.Y. |
| No 2 (2014) |
Investigation of influence of stress state parameters of fault zones on peculiarities of their mechanical response under shear loading |
|
|
Astafurov S.V., Shilko E.V., Psakhie S.G. |
| No 2 (2022) |
Contour integrals in nonlinear fracture mechanics for mixed forms of deformation |
|
|
Tartygasheva A.M. |
| No 1 (2016) |
On strain hardening of cast iron with proportional and complex loading |
|
|
Rychkov B.A., Goncharova I.V., Volkov A.V. |
| No 2 (2021) |
An Analytical Approach to Obtaining the Stress Field of a Cylindrical Shell with a Circular Hole under Tension |
|
|
Kashtanova S.V., Rzhonsnitskiy A.V. |
| No 1 (2014) |
Influence of circular hole on the shell stress state for arbitrary Gaussian curvature |
|
|
Dovbnya E.N., Krupko N.A. |
| No 2 (2018) |
Analysis of stress-strain state of dental implants by the boundary integral equations method |
|
|
Perelmuter M.N. |
| No 3 (2023) |
NON-CONTACT DEFORMATION WITH REVERSIBLE SURFACE PLASTIC DEFORMATION |
|
|
Zaides S.A., Nguyen N.N. |
| No 1 (2020) |
The Refined Plane Mechanical and Mathematical Model Determining Stresses in the Base of the Strip Foundation and Elastic Sediment |
|
|
Abdeev B.M., Brim T.F., Muslimanova G. |
| No 2 (2014) |
Features of low-temperature deformation and fracture of combined plastic pipes |
|
|
Anoshkin A.N., Pospelov A.B., Iakushev R.M. |
| No 1 (2022) |
Mathematical model of oxide film deformation on the surface of a metallic melt in an alternating magnetic field |
|
|
Nikulin I.L., Demin V.A. |
| No 4 (2018) |
Influence of the biaxial loading regimes on fatigue life of 2024 aluminum alloy and 40CrMnMo steel |
|
|
Wildemann V.E., Tretyakov M.P., Staroverov O.A., Yankin A.S. |
| No 3 (2016) |
Normal and shear stresses estimation in deformed metals based on infrared thermography data |
|
|
Terekhina A.I., Kostina A.A., Plekhov O.A. |
| No 2 (2021) |
Healing of Internal Defects in a Compressive Stress Field Using the Plastic Properties of Materials |
|
|
Bukhalov V.I., Perelmuter M.N., Popov A.L. |
| No 1 (2014) |
Experimental and theoretical investigations of visco-plastic deformation in structural steels considering mutual influence of plasticity and creep effects |
|
|
Volkov I.A., Volkov A.I., Kazakov D.A., Korotkikh Y.G., Tarasov I.S. |
| No 4 (2019) |
Identification of crack-like defect and investigation of stress concentration in coated bar |
|
|
Sobol B.V., Soloviev A.N., Rashidova E.V., Vasiliev P.V. |
| No 3 (2014) |
COMPARISON OF THE RESULTS OF SOLVING THE PROBLEM OF FRACTURE MECHANICS FOR PIPE WITH NON-THROUGH CRACK |
|
|
Glushkov S.V., Skvortsov Y.V., Perov S.N. |
| No 1 (2022) |
Analysis of multiaxial fatigue models based on the results of biaxial tests for aluminum alloys |
|
|
Gabe A.A., Wildeman V.E., Yankin A.S. |
| No 4 (2018) |
Method for calculating acoustic stresses in six-beam diffraction in layered media |
|
|
Belyayev Y.N. |
| No 3 (2016) |
Stress-strain state near the wedge top with rigidly fastened sides |
|
|
Pestrenin V.M., Pestrenina I.V., Landik L.V. |
| No 3 (2024) |
ASYMPTOTIC BEHAVIOUR OF THE CRACK TIP FIELDS UNDER CREEP REGIME TAKING INTO ACCOUNT DAMAGE ACCUMULATION PROCESSES |
|
|
Chapliy D.V., Belova О.N., Stepanova L.V., Bykova Y.S. |
| No 2 (2021) |
Contradictions in the Plane Contact Problem of the Theory of Elasticity on the Compression of Cylinders in Contact with Parallel Generators |
|
|
Abdeyev B.M., Brim T.F., Muslimanova G. |
| No 1 (2014) |
Superposition of power-logarithmic and power singular solutions in two-dimensional elasticity problems |
|
|
Andreev A.V. |
| No 2 (2023) |
STRESS-STRAIN STATE DURING DRAFT OF WIDE BANDS WITH SHEAR |
|
|
Ashkeyev Z.A., Andreyachshenko V.A., Nogaev K.A., Bukanov Z.U. |
| No 3 (2019) |
Simulation of residual stresses during pulsed thermo-force surface hardening |
|
|
Bagmutov V.P., Denisevich D.S., Zakharov I.N., Romanenko M.D., Fastov S.A. |
| No 4 (2014) |
Method of determining endurance limit stress of cylindrical specimens made of structural steels by residual stresses of “check test piece” |
|
|
Saushkin M.N., Sazanov V.P., Vakulyuk V.S. |
| No 4 (2016) |
CORRELATION FUNCTIONS OF STRESS AND STRAIN FIELDS IN MICRO-HETEROGENEOUS MEDIA |
|
|
Tashkinov M.A., Mikhailova N.V. |
| No 2 (2024) |
COMPUTATIONAL-EXPERIMENTAL METHOD FOR STRESS-STRAIN CURVE CONSTRUCTING UNDER CONDITIONS OF INHOMOGENEOUS STRESS FIELDS |
|
|
Wildemann V.E., Mugatarov A.I., Khmelev A.A. |
| No 1 (2021) |
Interpretation of the generalized parameter of the probability of failure through the plastic stress intensity factor |
|
|
Tumanov A.V., Boychenko N.V. |
| No 1 (2013) |
Very-high-cycle fatigue facture of titanium compressor disks |
|
|
Burago N.G., Zhuravlev A.B., Nikitin I.S. |
| No 1 (2023) |
APPLICABILITY INDICATORS FOR THE NONLINEAR MAXWELL-TYPE ELASTO-VISCOPLASTIC MODEL WITH POWER MATERIAL FUNCTIONS AND TECHNIQUES TO CALIBRATE THEM |
|
|
Khokhlov А.V. |
| No 3 (2019) |
Buckling Problem of Composite Thin-Walled Structures with Properties Dependent on Loading Types |
|
|
Fedorenko A.N., Fedulov B.N., Lomakin E.V. |
| No 1 (2015) |
A two-level method for calculation of microstress on reinforced plates with circular hole in case of extension normal to principal direction |
|
|
Darya zadeh S., Lvov G.I. |
| No 4 (2021) |
Influence of the stress-strain state on the jerky flow effects and kinetics of the strain bands nucleation in Al-Mg alloy (A 95456) |
|
|
Tretyakova T.V., Tretyakov M.P., Lunegova E.M. |
| No 3 (2018) |
Finite element study of mixed mode loading of the cracked semicircular disc under bending |
|
|
Stepanova L.V., Frolov K.V. |
| No 4 (2016) |
Stress-strain state of an elastic soft functionally-graded coating subjected to indentation by a spherical punch |
|
|
Volkov S.S., Vasiliev A.S., Aizikovich S.M., Seleznev N.M., Leontieva A.V. |
| No 1 (2024) |
FLOW CURVES AND STRESS-STRAIN CURVES GENERATED BY A NONLINEAR MODEL FOR SHEAR FLOW OF THIXOTROPIC VISCOELASTIC MEDIA ACCOUNTING FOR STRUCTURE EVOLUTION |
|
|
Khokhlov A.V., Gulin V.V. |
| No 1 (2021) |
Experimental determination and finite element analysis of coefficients of the multi-parameter Williams series expansion in the vicinity of the crack tip in linear elastic materials. Part II |
|
|
Stepanova L.V. |
| No 1 (2013) |
Estimation of the stress-strain state of the revolving long cylinder |
|
|
Boyarshinov M.G. |
| No 1 (2023) |
PLANE PROBLEMS ABOUT THE ACTION OF OSCILLATING LOAD ON THE BOUNDARY OF AN ELASTIC ISOTROPIC LAYER IN THE PRESENCE OF SURFACE STRESSES |
|
|
Kalinina T.I., Nasedkin A.V. |
| No 3 (2019) |
The Modeling of the Edge Fatigue Crack Growth under High Frequency Loading |
|
|
Nikitin A.D., Nikitin I.S., Stratula B.A. |
| No 3 (2015) |
Modeling of elastic behavior of multicomponent composite materials based on approximate solution of stochastic boundary value problems |
|
|
Tashkinov M.A. |
| No 4 (2021) |
Theories of plasticity under complex loading along spatial trajectories of deformations |
|
|
Bondar V.S., Abashev D.R., Fomin D.J. |
| No 3 (2018) |
Fatigue crack growth kinetic on steels under variable amplitude loading |
|
|
Savkin A.N., Sunder R., Badikov K.A., Sedov A.A. |
| No 2 (2017) |
A shock loading on a bar with a central crack |
|
|
Malik A.V., Ryazantseva I.E., Lavit I.M. |
| No 1 (2024) |
MODELING OF HIGH-RATE HARDENING OF A POLYMER COMPOSITE MATERIAL UNDER LOADING ALONG THE REINFORCEMENT DIRECTION |
|
|
Fedulov B.N., Konstantinov A.Y., Fedorenko A.N., Sergeichev I.V. |
| No 4 (2020) |
The influence of surface effects in the problem of theory of elasticity for a circular hole in a half-plane |
|
|
Gandilyan D.V. |
| No 2 (2013) |
Experimental study of limit stress-strain state quasi-brittle material using correlation techniques digital images |
|
|
Tretyakova T.V., Spaskova E.M. |
| No 3 (2019) |
The Assessment of Fatigue Durability and Critical Plane Determination for Multiaxial Cyclic Loading at an Arbitrary Shift of Phases |
|
|
Burago N.G., Nikitin I.S., Nikitin A.D., Stratula B.A. |
| No 3 (2015) |
A set of tests for studying the effect of the stress state on ultimate metal plasticity at high temperature |
|
|
Smirnov S.V., Vichuzhanin D.I., Nesterenko A.V. |
| No 4 (2021) |
DETERMINATION OF THE STRESS STATE AND THE FORCE OF DEFORMATION OF BALL-SHAPED BILLETS IN A CLOSED MATRIX |
|
|
Ashkeyev Z.A., Andreyachshenko V.A., Abishkenov M.Z., Bukanov Z.U. |
| No 3 (2018) |
A fracture locus for a 2 wt% aluminum-graphene metal matrix composite at 300 °C |
|
|
Vichuzhanin D.I., Yolshina L.A., Smirnov A.S., Muradymov R.V. |
| No 4 (2017) |
ESTIMATION OF CRACK PROPAGATION DIRECTION ANGLE UNDER MIXED-MODE LOADING (MODE I AND MODE II): GENERALIZED FRACTURE MECHANICS CRITERIA AND ATOMISTIC MODELING (MOLECULAR DYNAMICS METHOD) |
|
|
Stepanova L.V., Bronnikov S.A., Belova O.N. |
| No 1 (2024) |
THERMOMECHANICAL COUPLED MODEL OF COATING SYNTHESIS ON A SUBSTRATE |
|
|
Knyazeva A.G. |
| No 4 (2020) |
Experimental determination and finite element analysis of coefficients of the multi-parameter Williams series expansion in the vicinity of the crack tip in linear elastic materials. Part I |
|
|
Stepanova L.V. |
| No 2 (2013) |
Residual stresses in preform of stress applying part for Panda type optical fiber with considering of technological imperfections of doping |
|
|
Semenov N.V., Trufanov A.N., Trufanov N.A. |
| No 3 (2019) |
The Analysis of residual stresses in layered composites with [0°/90°] layup |
|
|
Bondarchuk D.A., Fedulov B.N., Fedorenko A.N., Lomakin E.V. |
| No 4 (2015) |
Biharmonic (two-frequency) load frequencies influence on mechanical behavior of solid propellant simulator |
|
|
Yankin A.S. |
| No 3 (2021) |
The Applied mechanical and mathematical model of grinding of a solid particle by static crushing |
|
|
Guryanov G.A., Abdeev B.M., Baigereyev S.R., Kim V.A., Suleimenov A.D. |
| No 1 (2019) |
The Influence of Stress Concentrators on the Magnesium Alloy Mechanical Behavior under Deformation at High Strain Rates in the Temperature Range from 295 to 673 K |
|
|
Skripnyak V.A., Skripnyak V.V., Kozulin A.A., Iohim K.V. |
| No 4 (2017) |
STOCHASTICAL MODEL OF MICROSTRUCTURAL FAILURE BASED ON RESTORATION OF DISTRIBUTIONS LAWS FOR RANDOM STRESS AND STRAIN FIELDS IN MICROHETEROGENEOUS MEDIA |
|
|
Tashkinov M.A. |
| No 4 (2022) |
INFLUENCE OF HIGH TEMPERATURE TREATMENT ON THE MECHANICAL CHARACTERISTICS OF CARBON-CARBON COMPOSITE MATERIALS WITHPYROCARBON MATRIX |
|
|
Magnitskaya M.V., Magnitsky I.V., Tashchilov S.V., Tsvetkov D.A. |
| No 4 (2015) |
Complete asymptotic expansion M. Williams near the crack tips of collinear cracks of equal lengths in an infinite plane medium |
|
|
Stepanova L.V., Roslyakov P.S. |
| No 3 (2021) |
Theories of plasticity under complex loading along flat trajectories of deformations |
|
|
Bondar V.S., Abashev D.R., Fomin D.J. |
| No 1 (2019) |
Mechanical behavior of X15CrNi12-2 structural steel under biaxial low-cycle fatigue at normal and elevated temperatures |
|
|
Lomakin E.V., Tretyakov M.P., Ilinykh A.V., Lykova A.V. |
| No 4 (2017) |
The Stress-Strain State and Failure of Structural Elements with Sharp Stress Concentrators under Bending |
|
|
Sapozhnikov S.B., Ivanov M.A., Yaroslavtsev S.I., Shcherbakov I.A. |
| No 4 (2020) |
Research of the asymmetric rolling of workpieces |
|
|
Ashkeyev Z.A., Andreyachshenko V.A., Bukanov Z.U. |
| No 3 (2014) |
STOCHASTIC MODELLING OF DEFORMATION PROCESS IN ELASTOPLASTIC COMPOSITES WITH RANDOMLY LOCATED INCLUSIONS USING HIGH ORDER CORRELATION FUNCTIONS |
|
|
Tashkinov M.A. |
| No 3 (2022) |
Low-cycle fatigue of V-notched cylindrical samples of bronze alloy |
|
|
Abashev D.R. |
| No 2 (2019) |
The Investigation of the Initial Stress-Strain State Influence on Mechanical Properties of Viscoelastic Bodies |
|
|
Bogachev I.V., Vatulyan A.O., Dudarev V.V., Nedin R.D. |
| No 1 (2016) |
Finite-element modelling of thermal and deformational processes in manufacturing high-strength wire |
|
|
Shavrin O.I., Skvortsov A.N. |
| No 3 (2021) |
STRESS STATE AND CONDITIONS FOR CRACK INITIATION IN THE ADHESION LAYER OF THE COMPOSITE |
|
|
Bogacheva V.E., Glagolev V.V., Glagolev L.V., Markin A.A. |
| No 1 (2019) |
Investigation of the behavior of cylindrical bodies under conditions of joint tension and torsion under disproportionate loading |
|
|
Kryukov A.A. |
| No 4 (2017) |
Determination of the critical plane and assessment of fatigue durability under various cyclic loading regimes |
|
|
Nikitin I.S., Burago N.G., Nikitin A.D., Yakushev V.L. |
| No 4 (2023) |
ANALYSIS OF THE STRESS-STRAIN STATE OF ALUMINUM ALLOY D16T UNDER A COMPLEX STRESS STATE ACCOUNTING FOR DAMAGE |
|
|
Kosov D.A., Fedorenkov D.I. |
| No 3 (2020) |
Fracture resistance parameters for the compressor disk imitation model |
|
|
Yakovlev M.M., Yarullin R.R., Shlyannikov V.N. |
| No 2 (2014) |
Mechanical properties of technical plasticine under static and dynamic loadings |
|
|
Sapozhnikov S.B., Ignatova A.V. |
| No 2 (2022) |
About preliminary statistical processing of information on the study of fatigue strength of machine parts |
|
|
Kulagin A.V., Russkih E.V. |
| No 4 (2018) |
Generalized dynamic theory of a solid particle grinding by pulse-force compression with two non-deformable balls |
|
|
Abdeev B.M., Baigereyev S.R., Guryanov G.A. |
| No 3 (2016) |
Graph model of three-dimensional elastic solids in Cartesian Coordinates |
|
|
Tyrymov A.A. |
| No 2 (2021) |
The Crack Growth in the Imitation Model of a GTE Turbine Disk under Operating Loading Conditions |
|
|
Yarullin R.R., Shlyannikov V.N., Sulamanidze A.G. |
| No 1 (2014) |
Study of the stress state in composite plate near the connecting line edge depending on the thickness and material parameters of the connecting interlayer |
|
|
Pestrenin V.M., Pestrenina I.V., Landik L.V., Polyanina E.A. |
| No 1 (2018) |
Plastic deformation of materials sensitive to a type of stress state |
|
|
Bondar V.S., Abashev D.R. |
| No 4 (2023) |
ELASTIC-PLASTIC BEHAVIOR AND FRACTURE OF STRUCTURES WITH LOSS CONCENTRATORS UNDER CYCLIC LOADS |
|
|
Bondar V.S., Abashev D.R., Fomin D.J. |
| No 3 (2020) |
Structural failure criterion for spatially-reinforced carbon-carbon composite materials |
|
|
Magnitsky I.V. |
| 1 - 95 of 95 Items |
|
